> Amplifiers and Preamps > Digital Craze.com

225 watts X 2 channels at 8Ω (20Hz to 20 kHz) at .09% Total ... Read more

225 watts X 2 channels at 8Ω (20Hz to 20 kHz) at .09% Total Harmonic Distortion Class A Pre-Driver circuitry improves low-level detail for a smoother and more musical sound. Class AB Mosfet Output stage delivers efficient linear power. Balanced Inputs deliver the quietest and most accurate signal path between your preamp and amplifier. Differential input stage with a current source load assures DC stability and wide bandwidth linearity. Use of 1% Metal Film Resistors in the entire active circuitry to reduce noise for greater purity of sound. Use of Toroidal Transformers and Computer Grade Capacitors to provide high current for superior dynamics and extended low frequency control. Capability to operate at full power with a square wave input signal. Individual External Fuse Protection prevents damage from accidental shorting of output devices while preserving the highest level of integrity to the original signal possible. Minimize

1X140 WATTS AT 8 OHMS 200 AT 4 OHMS.

New cosmetics New Push on/off power switch 140 watts per ch ... Read more

New cosmetics New Push on/off power switch 140 watts per channel 8 ohms 200 watts 4 ohms Available in 3 4 and 5 Channel New SST 2 output devices Increased power supply capacitance - 30 000 MFD per channel Selectable Balanced or Unbalanced inputs Lower noise and distortion Two New Independent ultra-low-noise power transformers New computer modeled heat-sink design Quick connect remote 12 volt trigger Selectable gain - 1 Volt or 2 Volt Available in Silver or black finish with 19 or 17 inch faceplate Minimize

The new Bryston 875 HT amplifier represents a state-of-the- ... Read more

The new Bryston 875 HT amplifier represents a state-of-the-art approach to the expanding home theater marketplace. Providing all the features and flexibility necessary to assemble a superb Home Theater Multi-Channel Surround System. The world famous all new SST technology is implemented throughout the 875 HT amplifier providing the sound quality and incredible flexibility Bryston is famous for. The amplifier offers 8 channels of amplification which can be utilized as independent 75 watt modules or any 2 adjacent channels bridged to 250 watts. FLEXIBLE OPTIONS WOULD INCLUDE: 7.1 surround system incorporating 7 channels at 75 watts and 1 subwoofer channel at 75 watts 6.1 surround system incorporating 6 channels at 75 watts and one subwoofer channel at 250 watts 5.1 surround system incorporating 3 channels (left/center right) at 250 watts and 2 surround channels at 75 watts 7.1 surround system incorporating 250 watts x 4 for surrounds and two back speakers with an additional 3 channel amplifier (Bryston 6B SST) for the front Left/ Center Right speakers. Minimize

The challenge: to design an integrated audio amplifier with ... Read more

The challenge: to design an integrated audio amplifier with none of the compromises usually associated with this approach. Our design team has surpassed the challenge. The B-60 provides 60 watts per channel at 8 ohms and 100 watts per channel at 4 ohms. There are provisions for four high level inputs (CD Tuner Video and Aux) in addition to one tape loop and a pre-out/main-in feature. A headphone jack is provided for those requiring monitoring and private listening provisions. An optional motor driven volume remote control is also available. This motorized volume approach ensures the lowest possible distortion of the audio signal. Options Include: Bryston Internal DAC Bryston Internal MM Phono Stage Bryston handheld remote volume control 4 stereo RCA inputs 1 stereo RCA output 1 stereo tape loop Headphone output Gold plated switch contacts and connectors Optional remote volume and mute Optional DAC Digital Circuits 5 Year Warranty Also Available with Moving Magnet Phono Stage Available Now w/ Silver Faceplate Minimize

An integration of a multi-room stereo audio distribution Bu ... Read more

An integration of a multi-room stereo audio distribution Bus with twelve compact and efficient 60W power amplifiers. Level Control - Local individual level control of each amplifier channel. May also be used to equally attenuate the level for both amplifier pairs. Dip Switch Configuration - Used to configure the On / Standby / Sense state of the unit the Bus audio and trigger distribution and Mono / Stereo configuration of the audio pairs. Bus Control and Muting - Allowing for single switching of the amplifier audio sense on/off feature and audio signal on any pair of amplifier channels with the Bus Switch enabled. Mono Usage - Ability to have up to twelve output channels that may be in mono. 12 Channel Amp. Here is one compact solution to your home theater amplifier needs. Providing a solid 55 watts per channel into 8 ohms and 85 watts per channel into 4 ohms you can drive most speaker systems to a level that will fill your room with sound. Each channel can be configured for left right or mono output. It can also be set up for parallel channel operation where high current is needed or bridged operation where high voltage is needed. Product Identifiers Brand B&K Model AV1260 MPN AV1260 Key Features Frequency Response 5 Hz - 45 kHz Number Of Channels 2 Tech Details Audio SNR 95 dB RMS Power at 4 Ohms 85 Watt RMS Power at 8 Ohms 55 Watt THD (Total Harmonic Distortion) 0.09 % No. of Speaker Outputs 12 Minimize

TYPICAL INSTALLATION OPTIONS: 8 mono stations at 75 watts 8 ... Read more

TYPICAL INSTALLATION OPTIONS: 8 mono stations at 75 watts 8 ohms. 4 stereo zones at 75 watts per channel 8ohms. 4 mono stations at 250 watts 8 ohms. 2 stereo zones at 250 watts per channel 8 ohms. 2 stereo zones at 75 watts and 1 stereo zone at 250 watts 8 ohms. FEATURES INCLUDE: 4 - stereo zones at 75 watts per channel 8 ohms. Zone channels bridgeable to 250 watts 8 ohms. Level control on each channel Each channel input can select from four options: Direct input from RCA jack Left stereo bus Right stereo bus L + R (mono) bus Stereo bus can be looped to other amplifiers Each zone can be muted externally or automatically unmuted when signal present External 12 volt power trigger State of the art sound quality Minimize

New cosmetics New Push on/off power switch 300 watts per ch ... Read more

New cosmetics New Push on/off power switch 300 watts per channel 8 ohms 500 watts 4 ohms 900 watts bridged 8 ohms New SST 2 output devices Increased power supply capacitance - 30 000 MFD per channel Selectable Balanced or Unbalanced inputs Lower noise and distortion Two New Independent ultra-low-noise power transformers New computer modeled heat-sink design Quick connect remote 12 volt trigger Selectable gain - 1 Volt or 2 Volt Available in Silver or black finish with 19 or 17 inch faceplate3 Minimize

New cosmetics New Push on/off power switch 300 watts per ch ... Read more

New cosmetics New Push on/off power switch 300 watts per channel 8 ohms 500 watts 4 ohms New SST 2 output devices Increased power supply capacitance - 30 000 MFD per channel Selectable Balanced or Unbalanced inputs Lower noise and distortion Three New Independent ultra-low-noise power transformers New computer modeled heat-sink design Quick connect remote 12 volt trigger Selectable gain - 1 Volt or 2 Volt Available in Silver or black finish with 19 or 17 inch faceplate Minimize

The SubContractor Series is a complete line of powerful eas ... Read more

The SubContractor Series is a complete line of powerful easy-to-install subwoofers designed to meet any custom installation need whether it?s in-room in-wall in-floor or in-ceiling. At the heart of the SC Series is the 1250 watt SC-1250 rack-mountable amplifier with a built-in 7-band automatic room-EQ. The SC-1250 uses Velodyne?s patented Energy Recovery System (ERS) Class D switching amplifier. With 3000 watts dynamic power it sports more than enough headroom to reproduce the impact and excitement of the most dramatic special effects and the lowest musical frequencies with detail and definition. Need even more bass? No problem. The SC-1250 can control up to two SC Series subs. Incredibly easy to install and configure 1250 watt RMS (3 000 watt peak) amplifier power Reliable Class D Energy Recovery System (ERS) switching design (patented) System friendly features: 12V trigger IR repeater jack RS-232 controllable (Creston Certified) Easily configured for up to TWO subwoofers Comes complete with remote microphone and rack mount hardware Minimize

New cosmetics New Push on/off power switch 600 watts at 8 o ... Read more

New cosmetics New Push on/off power switch 600 watts at 8 ohms 900 watts at 4 ohms New SST 2 output devices Increased power supply capacitance - 30 000 MFD per channel Selectable Balanced or Unbalanced inputs Lower noise and distortion Two New Independent ultra-low-noise power transformers New computer modeled heat-sink design Quick connect remote 12 volt trigger Selectable gain - 1 Volt or 2 Volt Available in Silver or black finish with 19 or 17 inch faceplate Minimize

An integration of a multi-room stereo audio distribution Bu ... Read more

An integration of a multi-room stereo audio distribution Bus with twelve compact and efficient 30W power amplifiers. Level Control - Local individual level control of each amplifier channel. May also be used to equally attenuate the level for both amplifier pairs. Dip Switch Configuration - Used to configure the On / Standby / Sense state of the unit the Bus audio and trigger distribution and Mono / Stereo configuration of the audio pairs. Bus Control and Muting - Allowing for single switching of the amplifier audio sense on/off feature and audio signal on any pair of amplifier channels with the Bus Switch enabled. Mono Usage - Ability to have up to twelve output channels that may be in mono. 12 Channels. 30 watts Power Rating: 8 ohms Power Rating: 55 watts @ 4 ohms. Current (Peak to Peak)16 Amps. Dynamic Headroom 1.0dB.Total Harmonic Distortion (THD) 0.09% at 1kHz. Frequency Response: 5 Hz - 45kHz. S/N (A-Weighted) 95 dB. 0.55V Input Sensitivity: 0.55V. Input Impedance: Input Impedance: 33.2 k ohms Dual Level Controls. Minimize

New cosmetics New Push on/off power switch 140 watts per ch ... Read more

New cosmetics New Push on/off power switch 140 watts per channel 8 ohms 200 watts 4 ohms Available in 3 4 and 5 Channel New SST 2 output devices Increased power supply capacitance - 30 000 MFD per channel Selectable Balanced or Unbalanced inputs Lower noise and distortion Two New Independent ultra-low-noise power transformers New computer modeled heat-sink design Quick connect remote 12 volt trigger Selectable gain - 1 Volt or 2 Volt Available in Silver or black finish with 19 or 17 inch faceplate Minimize