> GaMa

GA.MA Electronic Ceramic Nano-Tourmaline Flat Iron 1inch 1 ... Read more

GA.MA Electronic Ceramic Nano-Tourmaline Flat Iron 1inch 1 ea High power Ceramic Heater instantly hot in 2 seconds Super Hot 200°C/392°F Plates covered with ceramic-nano tourmaline Thermal Plus Plastic Body Anti sliding grip Heat Protector Light transmitter diode Sliding on/off switch Swivel cord with hanging ring Automatic Multi-Volt 100 - 200 V suitable for travelling Minimize

Waterproof to IP-66 Rated 30 Amp@ 12VDC Dimensions: 2 3/4' ... Read more

Waterproof to IP-66 Rated 30 Amp@ 12VDC Dimensions: 2 3/4' L x 2 3/8' W x 2' H (including the switch button guard). Minimize

Polarity Reversing Rated at 80 amp @ 14VDC Enclosure is pol ... Read more

Polarity Reversing Rated at 80 amp @ 14VDC Enclosure is polycarbonate Size is approximately 2.7"L x 2.3"W x 1.6"H. Minimize

SPST On-Off 30A 12VDC, 15A 125VAC, 10A 250VAC, Mounts in a ... Read more

SPST On-Off 30A 12VDC, 15A 125VAC, 10A 250VAC, Mounts in a 7/16 diameter hole and it has 1/4 quick connect terminals. UL & CSA Approved. Minimize

2 pole, 2-6 position rotary switch. Adjustable Stops Non-sh ... Read more

2 pole, 2-6 position rotary switch. Adjustable Stops Non-shorting Solder Terminals .250 dia. D shaft (.215 across flat) 1.18 Long 3/8-32 bushing x .300 Long Break 2 Amp at 28 Volts DC 1.0 AMP at 110 Volts AC, Resistive Carry 5 Amps Minimize

SPST Off On Illuminated Contacts are rated at 6 amps 12 VDC ... Read more

SPST Off On Illuminated Contacts are rated at 6 amps 12 VDC. Panel cutout is .55 x 1.125 inches. Minimize

DPDT Momentary On-Off-Momentary On Rated at 30 amp @12VDC, ... Read more

DPDT Momentary On-Off-Momentary On Rated at 30 amp @12VDC, 16 amp @ 120VAC, 10 amp @ 250VAC. Internal gasket keeps water & dust out of contacts .83 x 1.48 inch mounting hole. 1/4" quick connect terminals. Minimize

30 amp, Momentary On-Off-Momentary On Toggle Switch. It com ... Read more

30 amp, Momentary On-Off-Momentary On Toggle Switch. It comes with built-In jumper bars for polarity reversing. Simply connect power and ground and two DC motor leads and the switch will reverse the motor direction. This heavy duty switch mounts in a 7/16 diameter hole and it has 1/4 quick connect terminals. Minimize

4 Pole Double Throw Momentary On-Off-Momentary On Rated 15A ... Read more

4 Pole Double Throw Momentary On-Off-Momentary On Rated 15A 125VAC, 10A 250VAC, 30A 12VDC 1/4" Quick Connect Terminals Minimize

DPDT 30A 12VDC, 15A 125VAC, 10A 250VAC, Mounts in a 7/16 d ... Read more

DPDT 30A 12VDC, 15A 125VAC, 10A 250VAC, Mounts in a 7/16 diameter hole and it has 1/4 quick connect terminals. UL & CSA Approved. Minimize

A unique, patented integral boot makes this popular sized i ... Read more

A unique, patented integral boot makes this popular sized illuminated mini Rocker Switch waterproof to IP 65. Single Pole, Single Throw, Off-On Illuminated. Contacts are rated at 10 amp 12 VDC. The illumination operates at 12 VDC. Black body and red button. 3/16 inch quick connect terminals. Panel cutout is .51 x .77 inches. Minimize

DPDT 30A 12VDC, 15A 125VAC, 10A 250VAC, Mounts in a 7/16 d ... Read more

DPDT 30A 12VDC, 15A 125VAC, 10A 250VAC, Mounts in a 7/16 diameter hole and it has 1/4 quick connect terminals. UL & CSA Approved. Minimize

70% Polyester 30% Cotton 3' X 5'

SPST Off On Illuminated Contacts are rated at 7.5 amps 12 V ... Read more

SPST Off On Illuminated Contacts are rated at 7.5 amps 12 VDC. Panel cutout is .55 x 1.125 inches. Minimize

4 Pole Double Throw On-Off-On Rated 15A 125VAC, 10A 250VAC, ... Read more

4 Pole Double Throw On-Off-On Rated 15A 125VAC, 10A 250VAC, 30A 12VDC 1/4" Quick Connect Terminals Minimize

30 amp, 12VDC On-Off-On Rocker Switch. This is a maintain ... Read more

30 amp, 12VDC On-Off-On Rocker Switch. This is a maintained switch meaning it stays locked in the selected postion. It comes with built-In jumper bars for polarity reversing. Simply connect power and ground and two DC motor leads and the switch will reverse the motor direction. This heavy duty switch mounts in a .83 x 1.48 inch hole and it has 1/4 quick connect terminals. Internal gasket keeps water & dust out of contacts. Black body and button. Minimize

30 amp, On-Off-On Toggle Switch. It comes with built-In jum ... Read more

30 amp, On-Off-On Toggle Switch. It comes with built-In jumper bars for polarity reversing. Simply connect power and ground and two DC motor leads and the switch will reverse the motor direction. This heavy duty switch mounts in a 7/16 diameter hole and it has 1/4 quick connect terminals. Minimize

1 pole, 2-12 position rotary switch. Adjustable Stops Non-s ... Read more

1 pole, 2-12 position rotary switch. Adjustable Stops Non-shorting Solder Terminals .250 dia. D shaft (.215 across flat) 1.18 Long 3/8-32 bushing x .300 Long Break 2 Amp at 28 Volts DC 1.0 AMP at 110 Volts AC, Resistive Carry 5 Amps Minimize

This waterproof switch assembly is perfect for outdoor appl ... Read more

This waterproof switch assembly is perfect for outdoor applications or in any wet and harsh environment. It is rated IP67 meaning it is protected from dirt and dust and can withstand immersion in up to 1 meter of water for 30 minutes. The rugged SPST On-Off power rocker switch is environmentally sealed. The actuator is sealed by means of a unique, patented integral boot. The switch body and connections are encapsulated in urethane inside a robust ABS enclosure. There are two mounting tabs on the enclosure which allow the switch to be secured to any convenient mounting surface. The dimensions of the enclosure are 3" long x 3/4" wide x 1" high (including the switch button). Wire switch leads are 6" long. The switch is rated at 16A @ 125VAC, 10A @ 250VAC, 10A @ 12VDC. It is ideal for marine applications, construction equipment, automotive accessories or other applications in harsh environments. Proudly made in the USA. Minimize