> Furniture > tables > Storage & Organization > SCHOOLSin

Single faced tables that provide a fully equipped science c ... Read more

Single faced tables that provide a fully equipped science center for any number from two to eight students. This product is for two of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard with drawers. Clear chemical resistant UV finish. Single face two student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Single faced tables that provide a fully equipped science c ... Read more

Single faced tables that provide a fully equipped science center for any number from two to eight students. This product is for three of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard with drawers. Clear chemical resistant UV finish. Single face two student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Single faced tables that provide a fully equipped science c ... Read more

Single faced tables that provide a fully equipped science center for any number from two to eight students. This product is for four of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard with drawers. Clear chemical resistant UV finish. Single face two student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Double faced tables that provide a fully equipped science c ... Read more

Double faced tables that provide a fully equipped science center for any number from four to 16 students. This product is for three of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The double faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard and drawers. Clear chemical resistant UV finish. Double face four student unit measures 66"L x 48"W x 36"H. Add 66" in length for each additional four students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Double faced tables that provide a fully equipped science c ... Read more

Double faced tables that provide a fully equipped science center for any number from four to 16 students. This product is for two of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The double faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard and drawers. Clear chemical resistant UV finish. Double face four student unit measures 66"L x 48"W x 36"H. Add 66" in length for each additional four students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Double faced tables that provide a fully equipped science c ... Read more

Double faced tables that provide a fully equipped science center for any number from four to 16 students. This product is for two of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The double faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard and drawers. Clear chemical resistant UV finish. Double face four student unit measures 66"L x 48"W x 36"H. Add 66" in length for each additional four students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Double faced tables that provide a fully equipped science c ... Read more

Double faced tables that provide a fully equipped science center for any number from four to 16 students. This product is for four of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The double faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard and drawers. Clear chemical resistant UV finish. Double face four student unit measures 66"L x 48"W x 36"H. Add 66" in length for each additional four students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Double faced tables that provide a fully equipped science c ... Read more

Double faced tables that provide a fully equipped science center for any number from four to 16 students. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The double faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard and drawers. Clear chemical resistant UV finish. Double face four student unit measures 66"L x 48"W x 36"H. Add 66" in length for each additional four students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Single faced tables that provide a fully equipped science c ... Read more

Single faced tables that provide a fully equipped science center for any number from two to eight students. This product is for three of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard with drawers. Clear chemical resistant UV finish. Single face two student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Single faced tables that provide a fully equipped science c ... Read more

Single faced tables that provide a fully equipped science center for any number from two to eight students. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard with drawers. Clear chemical resistant UV finish. Single face two student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Double faced tables that provide a fully equipped science c ... Read more

Double faced tables that provide a fully equipped science center for any number from four to 16 students. This product is for four of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The double faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard and drawers. Clear chemical resistant UV finish. Double face four student unit measures 66"L x 48"W x 36"H. Add 66" in length for each additional four students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Single faced tables that provide a fully equipped science c ... Read more

Single faced tables that provide a fully equipped science center for any number from two to eight students. This product is for two of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard with drawers. Clear chemical resistant UV finish. Single face two student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Single faced tables that provide a fully equipped science c ... Read more

Single faced tables that provide a fully equipped science center for any number from two to eight students. This product is for four of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard with drawers. Clear chemical resistant UV finish. Single face two student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Double faced tables that provide a fully equipped science c ... Read more

Double faced tables that provide a fully equipped science center for any number from four to 16 students. This product is for three of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The double faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard and drawers. Clear chemical resistant UV finish. Double face four student unit measures 66"L x 48"W x 36"H. Add 66" in length for each additional four students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

A compact rolling storage cabinet that offers the versatili ... Read more

A compact rolling storage cabinet that offers the versatility of serving as a storage area, a mobile demonstration table, or an extended work surface. This rigidly constructed unit features solid oak and oak veneered plywood. The cabinet is carefully finished with a clear chemical resistant UV finish to protect as well as highlight the beauty of real wood. The adjustable shelf is arranged to allow tall items to be placed in the unit as well as allowing use of the shelf. The unit comes equipped with four heavy-duty swivel casters with brakes. The doors lock for security. The unit is available with black 1 1/4" plastic laminate or 1 1/4" ChemGuard top. Dimensions: 36"W x 24"D x 36"H Minimize

Whitney Brothers’ Changing and Storage Cabinet is a durable ... Read more

Whitney Brothers’ Changing and Storage Cabinet is a durable and budget-friendly solution for your daycare. This beautiful birch changing table features an easy-to-wash top so you can quickly sanitize it between changes. And the sliding doors provide easy access to six storage cubbies. Other convenient features include a roll of changing paper and a safety strap. Key Features Easy-to-wash changing surface Six storage cubbies Specifications: Cabinet material: Baltic birch laminate Changing surface material: Polyethylene  Height: 36" Width: 44 1/2" Depth: 21" Assembly: Easy Warranty: Lifetime     Minimize

Specifications: Top shelf is solid surface so it is gr ... Read more

Specifications: Top shelf is solid surface so it is great for bussing tables and moving items that may spill. Easy to clean, non-staining surface. Shelf color choices: Black, Green, Topaz Blue, Burgundy, Gray, Red, Blue, Orange, Hunter Green, Tan, Purple, & Yellow Minimize

The Toddler Changing Cabinet from Whitney Brothers features ... Read more

The Toddler Changing Cabinet from Whitney Brothers features sturdy stow-away steps that slide smoothly on tracks. Caregivers can assist walking toddlers up the stairs for diaper changes, avoiding the risk of back strain. When not in use, the staircase slides back into the cabinet and the door can be closed. Additional storage space is behind right-hand sliding door. This durable birch changing table also comes with a washable mattress, safety strap and one paper roll.  Key Features Paper roll holder with easy-tear cutter bar Full-length continuous door hinge protects fingers Sliding doors provide easy access to stored supplies during changes Specifications Material: Baltic birch plywood Height: 36" Width: 43" Depth: 25"  Assembly: None Warranty: Lifetime   Minimize

A great addition to your classroom when space is a problem. ... Read more

A great addition to your classroom when space is a problem. Indoor/outdoor use. Includes one 4" deep beige tub and one storage tray, 2 snap-on caddies, and a white plastic lid. 4 locking casters provide easy mobility. Available in blue, red, green, or sandstone table frame. Ready to use. UPS Ground. Dimensions: 21"W x 21"L x 24"H Minimize