> Furniture > emily 4 drawer/store schoolsin

Provide work space for up to four students while storing yo ... Read more

Provide work space for up to four students while storing your valuable laboratory equipment in these versatile perimeter workstations. Choose from four different configurations (door, door and 1 drawer, door and 4 drawers or 4 drawers). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction combined with the clear UV finish ensure years of trouble free service. Each unit includes: your choice of 1" solid epoxy resin or 1" phenolic resin top with backsplash, solid epoxy drop-in style sink with strainer, 2 combination water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and drawers and rubber base molding. Sink measures: 12"W x 8"D x 6"H. Total unit measures: 90"W x 84"D x 36"H. Work surface on wall portion is 18"D. Perimeter units can be ordered without the sink, fixtures or rod sockets. Call for details. Units are shipped knocked down. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Provide work space for up to four students while storing yo ... Read more

Provide work space for up to four students while storing your valuable laboratory equipment in these versatile perimeter workstations. Choose from four different configurations (door, door and 1 drawer, door and 4 drawers or 4 drawers). The four cabinets which make up a single unit measure 24"W x 16"D x 35"H. The stations are designed to utilize space along walls where they can stand alone or be ganged together. Durable solid oak and oak veneer construction combined with the clear UV finish ensure years of trouble free service. Each unit includes: your choice of 1" solid epoxy resin or 1" phenolic resin top with backsplash, solid epoxy drop-in style sink with strainer, 2 combination water and gas fixtures, 4 rod sockets, rod storage (rods not included), 2 GFI electrical receptacles, keyed-alike locks on all doors and drawers and rubber base molding. Sink measures: 12"W x 8"D x 6"H. Total unit measures: 90"W x 84"D x 36"H. Work surface on wall portion is 18"D. Perimeter units can be ordered without the sink, fixtures or rod sockets. Call for details. Units are shipped knocked down. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

These finely crafted units feature solid hardwood and oak v ... Read more

These finely crafted units feature solid hardwood and oak veneers. They provide ample space for 4 people and are available with either a solid 1" epoxy resin or phenolic resin top. The drawer cabinet unit comes equipped with 16 drawers and 4 GFI AC duplex receptacles. Accessories include two combination water/gas fixtures, 4 rod sockets and a 16" x 16" x 7" solid epoxy sink with strainer, stopper and trap. The cabinet unit is designed to have one of the base cabinets removable to access the utilities. This unit can also be ordered without the sink or fixtures. Call for details. Unit is 36"H. Inside drawer dimensions: 26 1/2"W x 11"D x 5 1/2"H Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Simple, secure and super sturdy! The compact unit is perfec ... Read more

Simple, secure and super sturdy! The compact unit is perfect for printers and other small office machines. The pullout molded accessory drawer provides room to store letter or legal-size paper trays, ink or toner cartridges. Single locking drawer can be installed for left or right-hand opening. Includes two keys. Bottom shelf adjusts in 2-1/2" increments. Rolls smoothly to point-of-use on four swivel casters (2 locking). Constructed of tough 3/4" furniture-grade wood with stain and scratch-resistant laminate finish. Specifications: Tools Required: Yes UPSable: Yes Capacity - Weight: 200 lbs. Lockable: Yes, keyed random - 2 keys included Material Thickness: 3/4" Paint / Finish: Laminate Shelf Adjustablity: Bottom shelf adjusts in 2 1/2" increments Shelf Quantity: 2 Shelf Dimensions: 17 1/2"w x 15 3/4"d Wheel / Caster Style: 4 Swivel Casters (2 Locking) Wheel / Caster Size: 2" dia. Material(s): Furniture Grade Particleboard Drawer Quantity: 1 Pullout molded accessory drawer Recycled: 80% secondary wood waste, no post consumer Assembly Required: Yes Color: Grey Finished Product Dimensions: 19"w x 18 1/4"d x 22 1/2"h Finished Product Weight: 42 lbs. Minimize

Single faced tables that provide a fully equipped science c ... Read more

Single faced tables that provide a fully equipped science center for any number from two to eight students. This product is for two of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard with drawers. Clear chemical resistant UV finish. Single face two student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

MANAGER SERIES LAMINATE CONFERENCE FURNITURE 4 Drawer Com ... Read more

MANAGER SERIES LAMINATE CONFERENCE FURNITURE 4 Drawer Combination File in Maple Finish This highly durable, laminate conference room furniture collection creates a warm, attractive work environment. The matched modular components are made with a thermal fused melamine laminate and finished with a matching PVC edge. Combination File includes 2 box drawers, 1 file drawer and 1 full width lateral file drawer. Ergonomically designed drawer pulls for easy operation. File drawers have full extension suspension slides with 150 lb. capacity and hanging rails for letter and legal filing. Meets ANSI/BIFMA standards. Minimize

A self-contained demonstration center with its own water su ... Read more

A self-contained demonstration center with its own water supply, waste container, stainless steel sink and hand pump, two 3/4" diameter upright rods one 1/2" diameter crossbar and clamps. This unit includes four drawers for various lab supplies. The drawers are mounted on epoxy-coated nylon bearing glides for smooth operation. Sliding doors with a lock conceal the four drawers and storage compartment for large equipment and the two 2-gallon water bottles which are supplied. Heavy-duty 4" ball-bearing swivel casters with brakes, make this unit very maneuverable. A GFI protected AC duplex electrical outlet is built into the lab and can be powered with the 25' extension cord that is included. The top is 1 1/4" thick ChemGuard high pressure laminate. Sink measures 15"W x 13"L x 5"D. Unit is also available without the sink, faucet, rod sockets and upright set. Call for details. Overall dimensions are 48"W x 28"D x 36"H. Minimize

The See & Store Shelf from ECR4Kids is a beautiful and func ... Read more

The See & Store Shelf from ECR4Kids is a beautiful and functional cubby unit for your preschool classroom. Store toys, games, and small manipulatives in the three storage bins. And children can see what is inside through the clear acrylic windows. Each bin sits on casters, so you can easily access the contents. The deep shelves provide additional storage for students' items or classroom supplies.   Key Features Three see-through storage bins with casters Three deep storage cubbies Specifications Suggested age range: Preschool Material: Height: 48" Width: 28 1/2" Depth: 18" Bin dimensions: 13.25"H x 14.5"W x 16"D Assembly required   Minimize

The See & Store Bench from ECR4Kids is a beautiful and func ... Read more

The See & Store Bench from ECR4Kids is a beautiful and functional seating and storage unit for your preschool classroom. Stow away toys, games, and small manipulatives in the three storage bins. And children can see what is inside through the clear acrylic windows. Each bin sits on casters, so you can easily access the contents. The comfortable padded bench provides a place for reading and relaxation.  Key Features Three see-through storage bins with casters Comfortable padded bench Specifications Suggested age range: Preschool Material: Birch hardwood Height: 18.8" Width: 46" Depth: 17.3" Bin dimensions: 13.25"H x 14.5"W x 16"D Assembly required     Minimize

The center of attention! In the break room that is! The Mob ... Read more

The center of attention! In the break room that is! The Mobile Refreshment Center has four 2" swivel casters, (2 locking). The generous surface top has a 1 1/4" lip to secure machines. The pullout drawer is perfect for storing smaller supplies. Double door design has one fixed interior shelf. Constructed of 3/4" wood laminate. Cam-lock fasteners allow quick, easy assembly. Specifications: Tools Required: Yes UPSable: Yes Capacity - Weight: 100 lbs (Top), 100 lbs (bottom shelf), 100 lbs (inside shelf), 50 lbs per drawer Wheel / Caster Style: 4 Swivel Casters (2 Locking) Wheel / Caster Size: 2" dia. Recycled: 80% secondary wood waste, no post consumer Assembly Required: Yes Color: Grey Finished Product Dimensions: 23"w x 18 3/4"d x 31"h Finished Product Weight: 75 lbs. Minimize

Store small items in the three drawers and larger items in ... Read more

Store small items in the three drawers and larger items in the larger cabinet area with one adjustable shelf. The unit is constructed of solid maple and maple veneers and features a 1/8" pegboard on the right side of the unit for mounting tools. Rolls easily on 4" locking swivel casters. Your choice of a 1 1/4" black laminate top or 1 3/4" maple top. 36"W x 24"D. Minimize

Constructed of solid oak, hardwood and oak veneers, this un ... Read more

Constructed of solid oak, hardwood and oak veneers, this unit serves as a complete demonstration center offering a spacious work surface. It's clear UV finish highlights the beauty of real wood while offering superior chemical resistance. Included are 4 drawers (3 small, 1 file), and a cupboard for storage of large items. The drawers are expertly crafted from the finest materials with dovetail joinery throughout. Drawers run on epoxy-coated steel glides with nylon bearings for smooth operation. The top is your choice of 1" black solid epoxy resin or 1" phenolic resin. Unit comes complete with one each: combination water/gas fixture, GFI protected AC duplex receptacle, polypropylene trap, pull out writing board, support rod with crossbar, rubber base molding and locks for cupboard and all drawers. Ships knocked down. Can also be ordered without the sink, combination water/gas fixture, rod sockets or support rod. Call for details. Optional Side Desk This side desk is a great addition to the 5' Instructor's Desk. It attaches to the Instructor's Desk providing a functional work surface and storage area for teachers while sitting. Crafted from solid oak, oak and hardwood veneers it offers the warmth and beauty that is inherent in naturally finished wood. This side desk features one 13 1/2"W x 18"D x 10 1/4" H file drawer, two 13 1/2" W x 18"D x 4"H storage drawers and one 19 1/2"W x 18"D x 3"H pencil drawer. All drawers come with locks. The unit includes a 14 1/2" W x 20"D pull-out writing board. The classroom side of the unit features a bookshelf with one fixed shelf. The construction and materials are identical to the Instructor's Desk. Choice of 1"black solid epoxy resin or 1" phenolic resin top. Overall size is 48"W x 30"D x 30"H. The unit can be attached to either the right or left side of the Instructor's Desk. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

This mobile desk is equipped with two storage compartments ... Read more

This mobile desk is equipped with two storage compartments to hold large items. The three drawers (one file, two box) are assembled with dovetail joints and run smoothly on epoxy-coated steel glides. Pull out writing board allows for additional work space. All drawers and doors have locks. This unit features a 1 1/4" chemical resistant ChemGuard top, 21" x 28" pegboard and assorted hooks for vertical storage, 15" x 13" x 5" stainless steel sink and hand water pump. Also comes with two 2-gallon water bottles with all connecting hoses, two 3/4" diameter upright rods, one 1/2" diameter crossbar, two connecting clamps and two rod sockets installed in the table top. One GFI AC duplex electrical receptacle allows for simple connection of the 25' extension cord supplied. Unit has four heavy-duty 4" locking swivel casters. There is a storage area for the optional mirror-marker board. The entire unit is finished with clear UV finish. Overall dimensions: 28"D x 48"W x 36"H. This unit can also be ordered without the sink, faucet, rod sockets and upright set. Call for details. Minimize

Give students a sturdy place to work on science experiments ... Read more

Give students a sturdy place to work on science experiments and plenty of storage for supplies and notes with Diversified Woodcrafts' Single-Faced Science Table with Cabinets and Drawers. The solid oak and hardwood veneer base features a clear UV coating that protects it from chemical damage. Keep chemicals and expensive supplies locked away in the roomy cabinet and two locking drawers when class is over. The two legs and cabinet feature protective rubber base molding. Choose from four top finishes to best fit your needs and budget 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better) and 1" Phenolic Resin (best) or 1" Solid Epoxy Resin (best). See a complete description of each surface type below the Specifications. This Diversified Woodcrafts Single-Faced Science Table is 66"W x 24"L x 30"H and comes backed by a limited lifetime warranty. Product Features: Choose from four surface materials (see descriptions below) Solid oak and hardwood veneer base Two locking drawers Roomy locking cabinet with adjustable shelf Black rubber base molding protects your table from chemical spills Designed for two students Backed by a limited lifetime warranty Specifications: Top Material: Your choice of 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better), 1" Phenolic Resin (best) or 1" Solid Epoxy Resin Base Material: Solid oak and hardwood veneers Cabinet Capacity: 40 pounds Cabinet Dimensions: 24"W x 22"D x 29"H Drawer Dimensions: 11 1/2"W x 18"D x 5 1/2"H Width: 66" Length: 24" Height: 30" Warranty: Limited lifetime Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 4 different top surfaces to accommodate a variety of settings. GOOD 1 1/4" ARP High Pressure Plastic Laminate is widely used for student science tables. It offers an excellent work surface that wears exceptionally well under normal use. Plastic laminate has superior resistance to scratching, with limited resistance to high temperatures and severe chemicals. Top construction consists of permanently bonding a .050 thick sheet of ARP High Pressure Laminate to a 45 lb. density industrial grade particle board core, bottom is covered with a .040 thick brown phenolic backer sheet to properly balance the resulting panel, maximizing it's resistance to warping. Technical data: exceeds 1800 wear cycles and 66 inches impact resistance. Edges of top are finished with vandal resistant T-molding. Corners have 1-3/4" radius. Color, black. BETTER 1 1/4" ChemGuard incorporates the decorative features of high pressure laminate into a durable, chemical resistant surfacing material. Tests prove ChemGuard has outstanding chemical resistance, plus significantly better NEMA wear value than competitive laminates. ChemGuard even has a Class 1 fire rating. A 3mm PVC molding is applied with heat sensitive adhesive to create an attractive waterproof and durable edge. Color, black. BEST 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzen Minimize

Give students a sturdy place to work on science experiments ... Read more

Give students a sturdy place to work on science experiments and plenty of storage for supplies and notes with Diversified Woodcrafts' Double-Faced Science Table with Cabinet. The solid oak and hardwood veneer base features a clear UV coating that protects it from chemical damage. Keep chemicals and expensive supplies locked away in the roomy cabinet. The two legs and cabinet feature protective rubber base molding. Choose from four top finishes to best fit your needs and budget 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better) and 1" Phenolic Resin (best) or 1" Solid Epoxy Resin (best). See a complete description of each surface type below the Specifications. This Diversified Woodcrafts Double-Faced Science Table with Cabinet is 66"W x 42"L x 30"H and comes backed by a limited lifetime warranty. Product Features: Choose from four surface materials (see descriptions below) Solid oak and hardwood veneer base Roomy locking cabinet with adjustable shelf Black rubber base molding protects your table from chemical spills Designed for four students Backed by a limited lifetime warranty Specifications: Top Material: Your choice of 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better), 1" Phenolic Resin (best) or 1" Solid Epoxy Resin Base Material: Solid oak and hardwood veneers Cabinet Capacity: 40 pounds Cabinet Dimensions: 24"W x 22"D x 29"H Width: 66" Length: 42" Height: 30" Warranty: Limited lifetime Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 4 different top surfaces to accommodate a variety of settings. GOOD 1 1/4" ARP High Pressure Plastic Laminate is widely used for student science tables. It offers an excellent work surface that wears exceptionally well under normal use. Plastic laminate has superior resistance to scratching, with limited resistance to high temperatures and severe chemicals. Top construction consists of permanently bonding a .050 thick sheet of ARP High Pressure Laminate to a 45 lb. density industrial grade particle board core, bottom is covered with a .040 thick brown phenolic backer sheet to properly balance the resulting panel, maximizing it's resistance to warping. Technical data: exceeds 1800 wear cycles and 66 inches impact resistance. Edges of top are finished with vandal resistant T-molding. Corners have 1-3/4" radius. Color, black. BETTER 1 1/4" ChemGuard incorporates the decorative features of high pressure laminate into a durable, chemical resistant surfacing material. Tests prove ChemGuard has outstanding chemical resistance, plus significantly better NEMA wear value than competitive laminates. ChemGuard even has a Class 1 fire rating. A 3mm PVC molding is applied with heat sensitive adhesive to create an attractive waterproof and durable edge. Color, black. BEST 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven Minimize

Stabilize your station with a sturdy steel stand! Steel cab ... Read more

Stabilize your station with a sturdy steel stand! Steel cabinetry with matching scratch-resistant laminate top is complete with double doors that open to a large storage area that easily handles reams of paper, transparencies, supplies, etc. Laminate top easily accommodates most office machines. Convenient pullout drawer for storage of smaller office supplies. Mobile on four swivel casters (2 locking). Specifications: Tools Required: No UPSable: Yes Capacity - Weight: 200 lbs. Material Thickness: 22 ga. Wheel / Caster Style: Dual Wheel Casters (two locking) Material(s): Steel with laminate top Assembly Required: Yes Color: Grey Finished Product Dimensions: 25"w x 20"d x 29 3/4"h Finished Product Weight: 59 lbs. Minimize

Give students a sturdy place to work on science experiments ... Read more

Give students a sturdy place to work on science experiments and plenty of storage for supplies and notes with Diversified Woodcrafts' Single-Faced Science Table with Book Compartments, Cabinet and Drawers. The solid oak and hardwood veneer base features a clear UV coating that protects it from chemical damage. Keep chemicals and expensive supplies locked away in the roomy cabinet and two locking drawers when class is over. Slide notes into the two book compartments to keep them out of the way during experiments. The two legs and cabinet feature protective rubber base molding. Choose from four top finishes to best fit your needs and budget 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better) and 1" Phenolic Resin (best) or 1" Solid Epoxy Resin (best). See a complete description of each surface type below the Specifications. This Diversified Woodcrafts Single-Faced Science Table is 66"W x 24"L x 30"H and comes backed by a limited lifetime warranty. Product Features: Choose from four surface materials (see descriptions below) Solid oak and hardwood veneer base Two locking drawers Two book compartments Roomy locking cabinet with adjustable shelf Black rubber base molding protects your table from chemical spills Designed for two students Backed by a limited lifetime warranty Specifications: Top Material: Your choice of 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better), 1" Phenolic Resin (best) or 1" Solid Epoxy Resin Base Material: Solid oak and hardwood veneers Cabinet Capacity: 40 pounds Cabinet Dimensions: 24"W x 22"D x 29"H Drawer Dimensions: 11 1/2"W x 18"D x 5 1/2"H Book Compartment Dimensions: 12"W x 13"D x 3"H Width: 66" Length: 24" Height: 30" Warranty: Limited lifetime Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 4 different top surfaces to accommodate a variety of settings. GOOD 1 1/4" ARP High Pressure Plastic Laminate is widely used for student science tables. It offers an excellent work surface that wears exceptionally well under normal use. Plastic laminate has superior resistance to scratching, with limited resistance to high temperatures and severe chemicals. Top construction consists of permanently bonding a .050 thick sheet of ARP High Pressure Laminate to a 45 lb. density industrial grade particle board core, bottom is covered with a .040 thick brown phenolic backer sheet to properly balance the resulting panel, maximizing it's resistance to warping. Technical data: exceeds 1800 wear cycles and 66 inches impact resistance. Edges of top are finished with vandal resistant T-molding. Corners have 1-3/4" radius. Color, black. BETTER 1 1/4" ChemGuard incorporates the decorative features of high pressure laminate into a durable, chemical resistant surfacing material. Tests prove ChemGuard has outstanding chemical resistance, plus significantly better NEMA wear value than competitive laminates. ChemGuard even has a Class 1 fire rating. A 3mm PVC molding is applied with heat sensitive adhesive to create an attractive waterproof and durable edge. Color, black. BEST 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibit Minimize

Give students a sturdy place to work on science experiments ... Read more

Give students a sturdy place to work on science experiments and plenty of storage for supplies and notes with Diversified Woodcrafts' Single-Faced Science Table with Book Compartments and Cabinet. The solid oak and hardwood veneer base features a clear UV coating that protects it from chemical damage. Keep chemicals and expensive supplies locked away in the roomy cabinet. Slide notes into the two book compartments to keep them out of the way during experiments. The two legs and cabinet feature protective rubber base molding. Choose from four top finishes to best fit your needs and budget 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better) and 1" Phenolic Resin (best) or 1" Solid Epoxy Resin (best). See a complete description of each surface type below the Specifications. This Diversified Woodcrafts Single-Faced Science Table with Book Compartments and Cabinet is 66"W x 24"L x 30"H and comes backed by a limited lifetime warranty. Product Features: Choose from four surface materials (see descriptions below) Solid oak and hardwood veneer base Two book compartments Roomy locking cabinet with adjustable shelf Black rubber base molding protects your table from chemical spills Designed for two students Backed by a limited lifetime warranty Specifications: Top Material: Your choice of 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better), 1" Phenolic Resin (best) or 1" Solid Epoxy Resin Base Material: Solid oak and hardwood veneers Cabinet Capacity: 40 pounds Cabinet Dimensions: 24"W x 22"D x 29"H Book Compartment Dimensions: 12"W x 13"D x 3"H Width: 66" Length: 24" Height: 30" Warranty: Limited lifetime Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 4 different top surfaces to accommodate a variety of settings. GOOD 1 1/4" ARP High Pressure Plastic Laminate is widely used for student science tables. It offers an excellent work surface that wears exceptionally well under normal use. Plastic laminate has superior resistance to scratching, with limited resistance to high temperatures and severe chemicals. Top construction consists of permanently bonding a .050 thick sheet of ARP High Pressure Laminate to a 45 lb. density industrial grade particle board core, bottom is covered with a .040 thick brown phenolic backer sheet to properly balance the resulting panel, maximizing it's resistance to warping. Technical data: exceeds 1800 wear cycles and 66 inches impact resistance. Edges of top are finished with vandal resistant T-molding. Corners have 1-3/4" radius. Color, black. BETTER 1 1/4" ChemGuard incorporates the decorative features of high pressure laminate into a durable, chemical resistant surfacing material. Tests prove ChemGuard has outstanding chemical resistance, plus significantly better NEMA wear value than competitive laminates. ChemGuard even has a Class 1 fire rating. A 3mm PVC molding is applied with heat sensitive adhesive to create an attractive waterproof and durable edge. Color, black. BEST 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Minimize

Give students a sturdy place to work on science experiments ... Read more

Give students a sturdy place to work on science experiments and plenty of storage for supplies and notes with Diversified Woodcrafts' Single-Faced Science Table with Cabinet. The solid oak and hardwood veneer base features a clear UV coating that protects it from chemical damage. Keep chemicals and expensive supplies locked away in the roomy cabinet when class is over. The two legs and cabinet feature protective rubber base molding. Choose from four top finishes to best fit your needs and budget 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better) and 1" Phenolic Resin (best) or 1" Solid Epoxy Resin (best). See a complete description of each surface type below the Specifications. This Diversified Woodcrafts Single-Faced Science Table is 66"W x 24"L x 30"H and comes backed by a limited lifetime warranty. Product Features: Choose from four surface materials (see descriptions below) Solid oak and hardwood veneer base Roomy locking cabinet with adjustable shelf Black rubber base molding protects your table from chemical spills Designed for two students Backed by a limited lifetime warranty Specifications: Top Material: Your choice of 1 1/4" ARP High-Pressure Plastic Laminate (good), 1 1/4" ChemGuard (better), 1" Phenolic Resin (best) or 1" Solid Epoxy Resin Base Material: Solid oak and hardwood veneers Cabinet Capacity: 40 pounds Cabinet Dimensions: 24"W x 22"D x 29"H Width: 66" Length: 24" Height: 30" Warranty: Limited lifetime Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 4 different top surfaces to accommodate a variety of settings. GOOD 1 1/4" ARP High Pressure Plastic Laminate is widely used for student science tables. It offers an excellent work surface that wears exceptionally well under normal use. Plastic laminate has superior resistance to scratching, with limited resistance to high temperatures and severe chemicals. Top construction consists of permanently bonding a .050 thick sheet of ARP High Pressure Laminate to a 45 lb. density industrial grade particle board core, bottom is covered with a .040 thick brown phenolic backer sheet to properly balance the resulting panel, maximizing it's resistance to warping. Technical data: exceeds 1800 wear cycles and 66 inches impact resistance. Edges of top are finished with vandal resistant T-molding. Corners have 1-3/4" radius. Color, black. BETTER 1 1/4" ChemGuard incorporates the decorative features of high pressure laminate into a durable, chemical resistant surfacing material. Tests prove ChemGuard has outstanding chemical resistance, plus significantly better NEMA wear value than competitive laminates. ChemGuard even has a Class 1 fire rating. A 3mm PVC molding is applied with heat sensitive adhesive to create an attractive waterproof and durable edge. Color, black. BEST 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely Minimize

Single faced tables that provide a fully equipped science c ... Read more

Single faced tables that provide a fully equipped science center for any number from two to eight students. This product is for two of the above pictured units ganged together end to end. Each unit is constructed of solid oak, oak and hardwood veneers and built for years of dependable service. The single faced units contain a solid epoxy resin sink (12" x 8" x 6"H) along with faucets for every two students. Every unit contains enough gas cocks for each student along with GFI AC duplex electrical receptacles, rod sockets and book compartments. All units contain locks for the drawers and doors. The workstations are supplied with rubber base molding. Choose from models with a full cupboard only or a half cupboard with drawers. Clear chemical resistant UV finish. Single face two student unit measures 66"L x 30"W x 36"H. Add 66" in length for each additional two students. Your choice of 1" solid epoxy resin or 1" phenolic resin tops. Selecting Table Tops When selecting a table top it is important to understand how the table will be used. Diversified Woodcrafts, Inc. offers 2 different top surfaces for this product to accommodate a variety of settings. 1" Phenolic Resin is a composite thermo-fused under heat and pressure to form a solid black chemical resistant composite throughout the entire thickness of the top. It is designed for use as countertops, pegboards and reagent racks. Phenolic Resin will not stain or etch when exposed to most chemical solvents. Phenolic Resin exhibits no effect with subjected to these common laboratory chemicals: Nitric Acid 30%, Acetic Acid 98%, Hydrofluoric Acid 48%, Sulfuric Acid 33%, Methyl Ethyl Ketone, Phosphoric Acid 85% and others. Color, black. 1" Solid Epoxy Resin is impervious to normal laboratory chemicals and heat. It's monolithic composition eliminates the possibility of swelling, delamination, and exposure of the substrate. It's soft, low glare surface is simple to clean. Solid Epoxy Resin exhibits no effect when subjected to these common laboratory chemicals: Nitric Acid 70%, Acetic Acid (glacial), Hydrochloric Acid 20%, Sulfuric Acid 60%, Methyl Alcohol, Toluene, Benzene, and others. Solid Epoxy Resin is solid, homogeneous, molded from modified epoxy resins, completely oven cured during processing. It is extremely durable and completely impervious to moisture. Exposed edges and corners are finished with a 1/8" bevel. Color, black. Minimize

Manage your classroom's paperwork or arts and crafts suppli ... Read more

Manage your classroom's paperwork or arts and crafts supplies with this Mobile Preschool Organizer from ECR4Kids. The sturdy frame is constructed with tubular, chrome-plated steel. Fourteen polypropylene drawers - 12 standard and two extra deep - provide spacious storage for classroom materials, and the top metal shelf offers extra work space. Durable casters - two locking - make it easy to roll this cart around the room. Choose from multi-colored, white or smoke-colored drawers. ECR4Kids' Mobile Preschool Organizer is backed by a 2-year manufacturer's warranty. Features Sturdy, chrome-plated steel frame 14 polypropylene drawers Six casters - two locking Available in three colors Specifications Frame Material: Chrome-plated steel Drawer Material: Polypropylene Frame Dimensions: 24 3/4"W x 15 1/2"D x 31 3/4"H Standard Drawer Dimensions (12): 11 1/4"W x 15 1/2"D x 2 3/4"H Extra Deep Drawer Dimensions (2): 11 1/4"W x 15 1/2"D x 5 1/4"H Cart Capacity: 50 lbs Warranty: 2 years Minimize

This cabinet has four full width drawers and is constructed ... Read more

This cabinet has four full width drawers and is constructed of solid hardwood, solid oak and oak plywood veneers. Cabinets can be ganged together to create a wall of base cabinets. Finished natural with a clear chemical resistant UV finish. Measures 36"W x 22"D x 35"H. Tops and rubber base molding sold separately. Minimize