> Tools and Accessories > drill press table

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3 ... Read more

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3, Voltage 220, Hz 60, Amps Ac 6.0, Capacity Cast Iron 1-1/4 In., Capacity Steel 1-1/4 In., Spindle Speed 115 To 3850, Number Of Speeds 12, Chuck Size 5/8 In., Spindle Taper Mt4, Spindle Travel 4-3/4 In., Column Dia. 4-5/8 In., Quill Dia. 2-61/64 In., Table Work Surface 15-3/4 In. X 19-3/4 In., Table Slots 1/2 In., Base Size 16 In. X 20 In., Overall Height 74 In., Overall Width 23-1/2 In., Overall Depth 29 In. Minimize

16 Speed Drill Press Floor w/Adjustable ±45 360 Table Bran ... Read more

16 Speed Drill Press Floor w/Adjustable ±45 360 Table Brand New Drilling Capacity : 16mm Max Spindle Stroke: 80mm Spindle Taper: Morse #2 S pindle Speeds: 16 Levels S pindle RPM: 210-3840 Distance from Spindle AXIS to Column Surface: 170mm to 290mm Max. Distance from Spindle end to Table Surface: 780mm Max. Distance from Spindle end to Base Surface: 1210mm The Angle of Internal Revolution of the Vertical Plane of Table : ±45 Rotation of Table about column: 360 Motor: 3/4 HP, 120V @ 6 Minimize

Woodpeckers Drill Press Table features a generous 16" x 23" ... Read more

Woodpeckers Drill Press Table features a generous 16" x 23" x 1" surface constructed of a MDF core covered with Formica Micro-Dot laminate - a unique texture which is a grid of small dimples that collect saw dust, allowing the surface to better grip the work piece under pressure. Removable insert minimizes tear-out when drilling through material without the need of a backer board and the insert can easily be replaced with any 1/2" thick material. Two double-wide T-tracks are embedded and bolted in place from underneath to virtually eliminate the possibility of pulling the track out when using optional deluxe hold down clamps (not included). Each T-track is permanently laser engraved with an easy to read, high contrast scale clearly indicating fence position. Once calibrated to your drill press, no further adjustment is needed. The 36" fence uses the same double-wide track as the table to give you more stop and accessory mounting options. The fence comes with a simple L stop, and optional flip stops can be added for increased versatility. Mounting hardware is included. Minimize

Floor Drill Press, Belt Drive, Swing 16 In., Motor Hp 1, Ph ... Read more

Floor Drill Press, Belt Drive, Swing 16 In., Motor Hp 1, Phase 1, Voltage 115, Hz 60, Amps Ac 15, Capacity Cast Iron 1 In., Capacity Steel 3/4 In., Spindle Speed 145 To 4800 Rpm, Number Of Speeds 16, Chuck Size 0-5/8 In., Spindle Taper 3mt, Spindle Travel 4-1/8 In., Column Dia. 3-5/8 In., Quill Dia. 2 In., Table Work Surface 13-3/8 X 14-3/16 In., Table Slots 1/2 In., Base Size 12.60 X 12.60 In., Overall Height 68 In., Overall Width 18 In., Overall Depth 27.5 In. Minimize

Built to last, and full of features that help increase prod ... Read more

Built to last, and full of features that help increase productivity, the RIKON 30-240 20-Inch Floor Drill Press is ideal for professional or do-it-yourself use. Its steel and cast iron construction combines with easy adjustments for powerful, efficient performance. Whether you're working at home or in a commercial shop, the 30-240 gives you more options to get the job done right.30-240 20-Inch Floor Drill PressAt a Glance:Provides powerful, smooth operation for professionals and hobbyists1-horsepower induction motor; 16 spindle speeds (150 to 4,200 RPM)Rack and pinion table height for fast, easy adjustmentsSolid steel and cast iron construction for exceptional durabilityTwo-year warranty1/3-horsepower, 20-inch floor drill press for professionals or do-it-yourselfers.View larger. Set clutch depth-stop for multiple precision drills. Efficient 1-Horsepower MotorThe 30-240 owes its efficient performance to a robust 1-horsepower TEFC motor, which ensures consistent, controlled power. It also features a 20-inch swing and provides 16 spindle speeds from 150 to 4,200 RPM. For added flexibility, its head tilts 45 degrees right or left--a great feature when you're angle drilling.Table Height Adjusts EasilyTo give you the versatility you need to tackle a range of jobs, the 30-240 features rack and pinion table height, which makes adjustments a simple matter of turning the large handles. You'll never have to worry about breaking or bending the handles as you work--they're made of solid cast iron for exceptional durability.Efficient Design for Streamlined WorkTo ensure precision and to save you time, the 30-240 also offers the convenience of a clutch depth stop, which makes it a snap to quickly set the drill depth. This feature is particularly helpful during repeated drilling. And to maintain an organized space where everything you need is at your fingertips, the 16-1/2 by 18-3/4-inch table includes slots for quick mounting of your jigs, vises, and figures.Solid Steel and Cast Iron ConstructionDesigned to be reliable year after year, the 30-240 boasts the durability of solid steel and cast iron construction. The rugged design and materials allow for vibration-free performance, which helps to improve accuracy and consistency.Dimensions and Warranty InformationThe 30-240 has a height of 68 inches, weighs 318 pounds, and is backed by a two-year warranty.What's in the BoxRIKON 30-240 20-Inch Floor Drill Press with table, chuck, one bag of loose parts, drill press head, feed handle, column assembly, base, one bag of belts, and owner's manual. Minimize

Search title and description (480) 990-7715 2933 North Hayd ... Read more

Search title and description (480) 990-7715 2933 North Hayden Road - Scottsdale, AZ 85251 16 Speed Upright Drill Press This is a new 16 speed upright drill press Cast iron table, base and drill body 5/8 Chuck capacity Max Speed: 260-4,220 RPM with laser centering device and work light Motor: 1/2 HP 4.8 AMP 120V / 60 Hz / 550 Watts 12 Diameter dry round table tilts 90 Degrees left and right Makes a great gift for yourself or a loved one All weights and measurements are approximate.Click here to Minimize

Floor Drill Press, Swing 16 In, Motor Hp 1/2, Voltage 120, ... Read more

Floor Drill Press, Swing 16 In, Motor Hp 1/2, Voltage 120, Hz 60, Amps 8.6, Capacity Cast Iron 5/8 In, Rpm 260, 400, 430, 560, 650, 680, 1260, 1440, 1620, 1950, 2270, 3080, Spindle Travel 3 1/4 In, Spindle To Table 29 In, Max Spindle To Base 46 1/2 In, Column Dia 2 7/8 In, Table Work Surface 10 1/2 X 10 1/2 In, Tilt Angle Left Or Right 45 Degrees, Overall Height 45 3/16 In, Overall Width 19 3/4 In, Overall Depth 13 In, Chuck Size 1/2 In, Includes Motor, Drill Chuck With Key, 6 Ft Power Cord Minimize

Get the convenience and efficiency of our full-size drill p ... Read more

Get the convenience and efficiency of our full-size drill press table for your benchtop! Fits 8" and 10" drill presses. Features an 11-5/8'' x 23-5/8" working surface, an aluminum T- track for hold-down jigs and fixtures, and an adjustable fence for maximum hold-down and stopping applications. Patented. Minimize

Also known as: SUN-5000A, SUN5000A, SUU-5000A; Heavy duty ... Read more

Also known as: SUN-5000A, SUN5000A, SUU-5000A; Heavy duty 3/4 HP motor Convenient belt tension lever for quick speed transition Table rotates 360° and pivots from 0° to 45° on each side with indicator to facilitate setting Replaceable 5/8" chuck and key available: part # RS5000A87 (Fits standard MT2 arbor) UL & CSA Listed Minimize

Floor Drill Press, Swing 20 In, Motor Hp 1, Voltage 120, Hz ... Read more

Floor Drill Press, Swing 20 In, Motor Hp 1, Voltage 120, Hz 60, Amps 16.0, Capacity Cast Iron 1 In, Rpm 150, 260, 300, 440, 490, 540, 1150, 1550, 2200, Spindle Travel 5 In, Spindle To Table 25 1/2 In, Max Spindle To Base 47 In, Column Dia 4 In, Table Work Surface 18 5/8 X 16 5/8 In, Overall Height 68 In, Overall Width 19 In, Overall Depth 34 In, Chuck Size 5/8 In, Includes Motor, Drill Chuck With Key, 6 Ft Power Cord Minimize

Brand New 5 Speed 8" Bench Top Drill Press Table Tilts 45 D ... Read more

Brand New 5 Speed 8" Bench Top Drill Press Table Tilts 45 Degrees 1/2" chuck This inexpensive, heavy-duty drill press is just what any homeowner needs in his basement shop for general-purpose drilling. Ball bearing motor with 5 speeds lets you drill in materials from wood through mild steel and iron. Includes depth-adjustment gauge. 5 speeds, between 620 and 3100 RPM Maximum swing: 8" Table tilts 45 degrees left and right Spindle stroke: 2" Chuck capacity: 1/2" Throat depth 4" Motor: 120 volts Column diameter: 1.89" Table dimensions: 6-5/16" x 6-1/2" Base dimensions: 11-1/8" x 7" Minimize

The Palmgren 15-Inch floor model drill press features a hea ... Read more

The Palmgren 15-Inch floor model drill press features a heavy cast iron base, column collar, work table, and head. Work table height is adjustable using rack and pinion mechanism. Table can be tilted 45-Degree both right and left, and rotates 360-Degree on a vertical axis. Work table surface is precision ground and features T-slots for secure, accurate mounting of work piece and also a coolant trough. Digital readout displays spindle depth and spindle RPM. Other features include an enclosed ball bearing quill assembly, quick belt change and tension mechanism, positive quick adjust feed depth stop and a 1/2HP, 1725 RPM motor. 5/8-Inch Chuck and self-ejecting key are included. 16 Spindle speeds range from 138 to 3476 RPM for drilling steel, cast iron, aluminum, wood, and plastic. Minimize

Heavy duty 3/4 HP motor Convenient belt tension lever for q ... Read more

Heavy duty 3/4 HP motor Convenient belt tension lever for quick speed transition Table rotates 360° and pivots from 0° to 45° on each side with indicator to facilitate setting Replaceable 5/8" chuck and key available: part # RS5000A87 (Fits standard MT2 arbor) UL CSA Listed Minimize

Floor Drill Press, Belt Drive, Swing 20 In, Motor Hp 1, 1 P ... Read more

Floor Drill Press, Belt Drive, Swing 20 In, Motor Hp 1, 1 Phase, Voltage 120/240, 16.0/8.0 Amps Ac, Capacity Cast Iron 3/4 In, Capacity Steel (in) 1/2 In, Spindle Speeds 12, 150-4200 Rpm, Chuck Size 5/8 In, Spindle Taper Mt3, Spindle Travel 4 3/4, Spindle To Table 32 3/8, Max Spindle To Base 43 1/2 In, Column Dia 3 5/8 In, Quill Dia 2 1/4 In, Table Work Surface 14 X 16 In, Table Slots 5/8w In, Overall Height 67 In, Overall Width 21 In, Overall Depth 34 In, Includes Drill Chuck With Key Minimize

Drilling Capacity: 16mm Max Spindle Stroke: 80mm Spindle Ta ... Read more

Drilling Capacity: 16mm Max Spindle Stroke: 80mm Spindle Taper: Morse #2 Spindle Speeds: 16 Levels Spindle RPM: 210-3840, Manufacturer: Generic Minimize

Floor Drill Press, Spline Drive, Swing 20 In., Motor Hp 2, ... Read more

Floor Drill Press, Spline Drive, Swing 20 In., Motor Hp 2, Phase 1, Voltage 115/230, Hz 60, Amps Ac 12.8, Capacity Cast Iron 1-1/4 In., Capacity Steel 1 In., Spindle Speed 300 To 2000 Rpm, Number Of Speeds Variable, Chuck Size 1/2 In., Spindle Taper Mt3, Spindle Travel 6 In., Column Dia. 4-1/2 In., Quill Dia. 3 In., Table Work Surface 18-1/8 X 14-3/4 In., Table Slots 5/8 In. W, Base Size 26 X 19 In., Overall Height 77-1/4 In., Overall Width 27 In., Overall Depth 34-1/4 In., Includes Led Readout Minimize

New 5 Speed Bench Table Top Drill Press With 1/2" Keyless C ... Read more

New 5 Speed Bench Table Top Drill Press With 1/2" Keyless Chuck Plate Tilts 45° Precise drilling at an incredible price. Five speeds: 620, 1100, 1720, 2340 and 3100 RPM Worklight helps with accuracy and prevents eyestrain Keyless chuck for fast, easy bit replacement Tilts 45° left and right Drill chuck capacity: 1/32" to 1/2" 8" swing 2" spindle stroke Cast iron feed lever Lightbulb sold separately. Column diameter: 1.89" Table dimensions: 6-5/8" x 6-3/8" Base dimensions: 11-1/8" L x 7" W Height: 22-1/2" Minimize

Floor Drill Press, Swing 20 In, Motor Hp 1, Voltage 115, 15 ... Read more

Floor Drill Press, Swing 20 In, Motor Hp 1, Voltage 115, 15 Amps Ac, Capacity Cast Iron 3/4 In, Capacity Steel 3/4 In, Spindle Speeds 12, 150-4200 Rpm, Chuck Size 3/4 In, Spindle Taper Mt3, Spindle Travel 4 3/4 In, Spindle To Table 24 5/8 In, Quill Dia 2 7/16 In, Table Work Surface 19 1/4 X 18 3/8 In, Belt Table Tilt Angle Left/right 45 Deg, Table Slots 5/8 X 1-3/16 In, Overall Height 66 3/4 In, Overall Width 19 1/4 In, Overall Depth 34 3/4 In, Includes Laser, Hex Wrenches, Aaa Battteries Minimize

Floor Drill Press, Swing 15 In, Motor Hp 1, Voltage 120, Hz ... Read more

Floor Drill Press, Swing 15 In, Motor Hp 1, Voltage 120, Hz 60, Amps 16.0, Capacity Cast Iron 1 In, Rpm Variable 300 To 3000, Rpm Readout, Spindle Travel 5 In, Spindle To Table 25 1/2 In, Max Spindle To Base 47 In, Column Dia 3 In, Table Work Surface 12 7/8 X 16 In, Overall Height 70 1/4 In, Overall Width 20 In, Overall Depth 28 1/2 In, Chuck Size 1/2 In, Includes Motor, Drill Chuck With Key, 6 Ft Power Cord Minimize

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3 ... Read more

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3, Voltage 220, Hz 60, Amps Ac 6.0, Capacity Cast Iron 1-1/4 In., Capacity Steel 1-1/4 In., Spindle Speed 115 To 3850, Number Of Speeds 12, Chuck Size 5/8 In., Spindle Taper Mt4, Spindle Travel 4-3/4 In., Column Dia. 4-5/8 In., Quill Dia. 2-61/64 In., Table Work Surface 15-3/4 In. X 19-3/4 In., Table Slots 1/2 In., Base Size 16 In. X 20 In., Overall Height 74 In., Overall Width 23-1/2 In., Overall Depth 29 In. Minimize

Get an additional four square feet of versatility and preci ... Read more

Get an additional four square feet of versatility and precision with our exclusive Drill Press Table and Fence system! We designed it to our exacting standards to be the best of its kind available at a great price, too! There's virtually no drill press operation you can't perform better and faster with our exclusive drill press table and fence. Patented. A generously-sized 28-1/2' x 21' working surface plus a removable insert that can be drilled for any size sanding drum. This table will fit virtually any drill press 12 inches or larger. (If you have a smaller drill press, we recommend our mini drill press table - Rockler# 24616.) Melamine table top surface is 1-1/8 inch thick. Includes two installed T-tracks for hold-down fixtures, and an adjustable fence for maximum hold-down and stopping applications. Minimize

The Palmgren 15-Inch bench top drill press features a heavy ... Read more

The Palmgren 15-Inch bench top drill press features a heavy cast iron base, column collar, work table, and head. Work table height is adjustable using rack and pinion mechanism. Table can be tilted 45-Degree both right and left, and rotates 360-Degree on a vertical axis. Work table surface is precision ground and featuresT-slots for secure, accurate mounting of work piece and also a coolant trough. Digital readout displays spindle depth and spindle RPM. Other features include an enclosed ball bearing quill assembly, quick belt change and tension mechanism, positive quick adjust feed depth stop and a 1/2HP, 1725 RPM motor. 5/8-Inch Chuck and self-ejecting key are included. 16 Spindle speeds range from 138 to 3476 RPM for drilling steel, cast iron, aluminum, wood, and plastic. Minimize