> Tools and Accessories > drill press table

Get the convenience and efficiency of our full-size drill p ... Read more

Get the convenience and efficiency of our full-size drill press table for your benchtop! Fits 8" and 10" drill presses. Features an 11-5/8'' x 23-5/8" working surface, an aluminum T- track for hold-down jigs and fixtures, and an adjustable fence for maximum hold-down and stopping applications. Patented. Minimize

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3 ... Read more

Drill Press, Geared Head, Swing 22 In., Motor Hp 2, Phase 3, Voltage 220, Hz 60, Amps Ac 6.0, Capacity Cast Iron 1-1/4 In., Capacity Steel 1-1/4 In., Spindle Speed 115 To 3850, Number Of Speeds 12, Chuck Size 5/8 In., Spindle Taper Mt4, Spindle Travel 4-3/4 In., Column Dia. 4-5/8 In., Quill Dia. 2-61/64 In., Table Work Surface 15-3/4 In. X 19-3/4 In., Table Slots 1/2 In., Base Size 16 In. X 20 In., Overall Height 74 In., Overall Width 23-1/2 In., Overall Depth 29 In. Minimize

Drilling Capacity: 16mm Max Spindle Stroke: 80mm Spindle Ta ... Read more

Drilling Capacity: 16mm Max Spindle Stroke: 80mm Spindle Taper: Morse #2 Spindle Speeds: 16 Levels Spindle RPM: 210-3840, Manufacturer: Generic Minimize

The DELTA 15-232 6 Speed Drill Press features a 3/4 HP sing ... Read more

The DELTA 15-232 6 Speed Drill Press features a 3/4 HP single-phase motor that has a 24-volt push-button, magnetic starter. It provides six speeds varying from 425 to 5500 RPM, and is capable of all drill jobs on different materials. The drill maintains proper belt tension automatically so you'll always have full power transmission. A snubber feature holds speed settings constant no matter the load conditions. The quill is large with a two-inch diameter, and a long quill travel lets you do deep-hole jobs such as skip and gang drilling. The drill features extra-large spindle bearings "6 PLUS 6" and "VS6" spindle and spindle pulleys that are supported by lubricated-for-life ball bearings. The table tilts 90 degrees in both directions and measures 11 x 14 inches. Included is the table, motor and controls, belt and pulley guard, belt and motor pulley, self-locking depth stop, depth gauge, self-ejecting chuck key. Minimize

Drill Press Clamp includes: One 5/16" x 1" T-Bolt, and One ... Read more

Drill Press Clamp includes: One 5/16" x 1" T-Bolt, and One 1" Round 5/16"-18 Through Hole Knob,Drill Press Table Clamp, and stop block. Minimize

Shop for Power Tools at The Home Depot. This heavy-duty sta ... Read more

Shop for Power Tools at The Home Depot. This heavy-duty stationary drill press is loaded with conveniences that enable quick, efficient and uniform drilling across a wide range of surfaces. A tilting woodworking table with large clamping edges and 4 mounting slots gives you an extremely versatile work surface that can be adjusted to meet the needs of each job. The large-capacity throat depth allows drilling to the center of a 15 inch workpiece and 12 different speed settings allow you to optimize the drilling rate so it matches any material type. Minimize

Great Accessory For Your Drill Press - Center-It makes it e ... Read more

Great Accessory For Your Drill Press - Center-It makes it easy to drill through the center of bar stock and round tubing. Also works great for holding tubes in place while sawing. Constructed of heavy 6065-T3 Aluminum for years of use.Here's how to drill thru the center ofbar stock, round tubing Center-It can be bolted to a drill press table for accurate repetative centered holes. Can also be used as a hand vise to allow no-clamp holding of round stock for sawing and cutting.Great Accessory For Your Drill Press - Center-It makes it easy to drill through the center of bar stock and round tubing. Also works great for holding tubes in place while sawing. Constructed of heavy 6065-T3 Aluminum for years of use. Center-It measures 4 wide by 5 long. The 2 vee with 90 degree angle suits most tube applications. 43369 605708427700 ANNVDRILL CI1 EMBD EMSHOP EMST EMTU HPDRPRESS HPSHOP SHOP TOOL TOOLS DRILL JIG PIPE ROUND TST1 ST14 ST80 Minimize

Also known as: SUN-5000A, SUN5000A, SUU-5000A; Heavy duty ... Read more

Also known as: SUN-5000A, SUN5000A, SUU-5000A; Heavy duty 3/4 HP motor Convenient belt tension lever for quick speed transition Table rotates 360° and pivots from 0° to 45° on each side with indicator to facilitate setting Replaceable 5/8" chuck and key available: part # RS5000A87 (Fits standard MT2 arbor) UL & CSA Listed Minimize

If you have ever been frustrated by the inadequate clamp op ... Read more

If you have ever been frustrated by the inadequate clamp opening and clumsiness of most drill press clamps, here is your answer. The post quickly mounts to most drill press tables with slots or holes, a bolt passes through the table and is secured with a large ring nut. To adjust the height for up to 5" of capacity, simply depress the clutch (similar to a pipe clamp) and slide the clamp head to the desired setting. Hold down pressure is provided by the cam action clamp on the head which features a 1-1/2" diameter rubber foot to help prevent marring your workpiece Minimize

Get an additional four square feet of versatility and preci ... Read more

Get an additional four square feet of versatility and precision with our exclusive Drill Press Table and Fence system! We designed it to our exacting standards to be the best of its kind available at a great price, too! There's virtually no drill press operation you can't perform better and faster with our exclusive drill press table and fence. Patented. A generously-sized 28-1/2' x 21' working surface plus a removable insert that can be drilled for any size sanding drum. This table will fit virtually any drill press 12 inches or larger. (If you have a smaller drill press, we recommend our mini drill press table - Rockler# 24616.) Melamine table top surface is 1-1/8 inch thick. Includes two installed T-tracks for hold-down fixtures, and an adjustable fence for maximum hold-down and stopping applications. Minimize

Floor Drill Press, Belt Drive, Swing 16 In., Motor Hp 1, Ph ... Read more

Floor Drill Press, Belt Drive, Swing 16 In., Motor Hp 1, Phase 1, Voltage 115, Hz 60, Amps Ac 15, Capacity Cast Iron 1 In., Capacity Steel 3/4 In., Spindle Speed 145 To 4800 Rpm, Number Of Speeds 16, Chuck Size 0-5/8 In., Spindle Taper 3mt, Spindle Travel 4-1/8 In., Column Dia. 3-5/8 In., Quill Dia. 2 In., Table Work Surface 13-3/8 X 14-3/16 In., Table Slots 1/2 In., Base Size 12.60 X 12.60 In., Overall Height 68 In., Overall Width 18 In., Overall Depth 27.5 In. Minimize

Featuring the exceptional durability of solid steel and cas ... Read more

Featuring the exceptional durability of solid steel and cast iron construction, the RIKON 30-120 13-Inch Drill Press offers the convenience of 16 spindle speeds and large cast iron handle for easy operation. Powerful and easy to use, the 30-120 has a 13-inch swing, and it is ideal for both the hobbyist and professional user.30-120 13-Inch Drill PressAt a Glance:Rugged, user-friendly design with 1/2-horsepower motor for professionals and hobbyistsConvenient rack and pinion table height adjustmentClutch depth stop for easy and accurate settingsExceptional durability--solid steel and cast iron constructionTwo-year warranty13-inch drill press has 16 spindle speeds and is made of solid steel and cast iron. View larger.Replace bits and jigs fast with the easy-to-locate key and key-holder.Powerful 1/2-Horsepower MotorPowerful, smooth, and efficient, the 30-120 owes its robust performance to a 1/2-horsepower motor that provides plenty of torque for whatever material you're drilling. 16 spindle speeds from 200 to 3,630 RPM lend versatility. A clutch depth stop lets you set the drill depth, making the 30-120 particularly helpful for projects requiring repeated drilling.Cast Iron and Solid Steel ConstructionBoasting rugged cast iron and solid steel construction for vibration-free operation, this drill press is built to last. Complete with a cast iron head, tilting table, and base, as well as comfortable solid cast iron handles that will not bend or loosen after repeated use, the 30-120 provides reliable performance job after job, making it an ideal addition to a variety of job sites and shops.Easy-Adjust Table Height, Table Tilt, and Convenient Slot DesignDesigned to be exceptionally easy to use, the 30-120 is packed with helpful features. The table height conveniently adjusts with rack and pinion gears, which means you can make quick adjustments with the simple turn of a handle.It also features a convenient slot design, which makes for fast, easy mounting of jigs, vises, and fixtures. For added convenience and to accommodate different material sizes, the 11-3/16-inch table also tilts 45 degrees right or left and rotates a full 360 degrees.Dimensions and Warranty InformationThe 30-120 has a height of 39 inches, depth of 24 inches, and weighs 121 pounds. It is backed by a two-year warranty.What's in the BoxRIKON 30-120 13-Inch Drill Press with drill press head, arm, table support, table, column assembly, base, two loose hardware bags, chuck, owner's manual, and cast iron handle. Minimize

Drill Press Microadjustable Table Fence Step by Step Plans ... Read more

Drill Press Microadjustable Table Fence Step by Step Plans & Hardware Kit from the Woodsmith Project Center. This is new, never out of the carton. For starters, you receive ShopNotes Vol. 3, Issue 18 The kit includes the following: (3) Plastic Star Knobs (1) Threaded Rod (10) Flat Washers (7) Hex Nuts (1) Carriage Bolt (2) Wooden Wheels (2) Nylon Spacers (8) #8 x 3/4" Sheet-Metal Screws (20) #8 x 1 1/4" Sheet-Metal Screws (14) #8 x 1 1/2" Sheet-Metal Screws (4) #8 x 2" Sheet-Metal Screws The lumber list needed to make the Microadjustable Table and Fence (note, lumber is not included in the kit) is as follows: (2) 1/8" x 3/4" - 8" (1) 3/4" MDF - 24" x 48" (1) 3/4" hardboard - 24" x 36" Power Tools Required Table Saw Drill Press Router Overall Eimensions: 24" x 18 1/2" x 6" Minimize

Built to last, and full of features that help increase prod ... Read more

Built to last, and full of features that help increase productivity, the RIKON 30-240 20-Inch Floor Drill Press is ideal for professional or do-it-yourself use. Its steel and cast iron construction combines with easy adjustments for powerful, efficient performance. Whether you're working at home or in a commercial shop, the 30-240 gives you more options to get the job done right.30-240 20-Inch Floor Drill PressAt a Glance:Provides powerful, smooth operation for professionals and hobbyists1-horsepower induction motor; 16 spindle speeds (150 to 4,200 RPM)Rack and pinion table height for fast, easy adjustmentsSolid steel and cast iron construction for exceptional durabilityTwo-year warranty1/3-horsepower, 20-inch floor drill press for professionals or do-it-yourselfers.View larger. Set clutch depth-stop for multiple precision drills. Efficient 1-Horsepower MotorThe 30-240 owes its efficient performance to a robust 1-horsepower TEFC motor, which ensures consistent, controlled power. It also features a 20-inch swing and provides 16 spindle speeds from 150 to 4,200 RPM. For added flexibility, its head tilts 45 degrees right or left--a great feature when you're angle drilling.Table Height Adjusts EasilyTo give you the versatility you need to tackle a range of jobs, the 30-240 features rack and pinion table height, which makes adjustments a simple matter of turning the large handles. You'll never have to worry about breaking or bending the handles as you work--they're made of solid cast iron for exceptional durability.Efficient Design for Streamlined WorkTo ensure precision and to save you time, the 30-240 also offers the convenience of a clutch depth stop, which makes it a snap to quickly set the drill depth. This feature is particularly helpful during repeated drilling. And to maintain an organized space where everything you need is at your fingertips, the 16-1/2 by 18-3/4-inch table includes slots for quick mounting of your jigs, vises, and figures.Solid Steel and Cast Iron ConstructionDesigned to be reliable year after year, the 30-240 boasts the durability of solid steel and cast iron construction. The rugged design and materials allow for vibration-free performance, which helps to improve accuracy and consistency.Dimensions and Warranty InformationThe 30-240 has a height of 68 inches, weighs 318 pounds, and is backed by a two-year warranty.What's in the BoxRIKON 30-240 20-Inch Floor Drill Press with table, chuck, one bag of loose parts, drill press head, feed handle, column assembly, base, one bag of belts, and owner's manual. Minimize

Our Drill Press Table will quickly and easily maximize what ... Read more

Our Drill Press Table will quickly and easily maximize what your drill press can do for you! 18-3/4" x 23-3/4" large work surface provides more support than your small standard table. Our table is engineered to take the clamping pressure from an optional toggle clamp - no aluminum T-tracks that pull out or fill with debris. Made for 14" or smaller drill presses. Table bolts to your drill presses slotted table without drilling. Large 3-1/2" drill insert opening allows you to use sanding drums or large drill bits. Includes attachment hardware, insert levelers and one insert. Optional 1826TC Toggle Clamp available for fast and secure part holding. Minimize

Shop for Hand Tools at The Home Depot. Yost heavy duty dril ... Read more

Shop for Hand Tools at The Home Depot. Yost heavy duty drill press vise Model 6D, cast in 60,000 psi Ductile iron, is a sturdy 6 in. vise recommended for drill press use. The base includes three bolt lugs for versatility in mounting on a drill press table. The steel adjusting screw has a coarse-pitch thread for fast action. The fixed jaw is grooved vertically as well as horizontally for convenience in holding round pieces. Jaws are replaceable hardened steel. Overall dimensional specifications for the Model 6D drill press are as follows: 16-1/4 in. (Length), 9-1/4 in. (Width) and 3-1/2 in. (Height). Minimize

3-Piece Accessory Kit for Mini Drill Press Table or regular ... Read more

3-Piece Accessory Kit for Mini Drill Press Table or regular-size Rockler Drill Press Table. Includes: One Stop Block, 1 each 5/16" x 1" T-Bolt, 5/16" x 1" T-Bolt, one 1" Round 5/16"-18 Through Hole Knob, one Drill Press Fence Clamp, and one Drill Press Table Clamp. Each Clamp includes one 5/16" x 1" T-Bolt and one 1" Round 5/16"-18 Through Hole Knob. Minimize

Floor Drill Press, Swing 16 In, Motor Hp 1/2, Voltage 120, ... Read more

Floor Drill Press, Swing 16 In, Motor Hp 1/2, Voltage 120, Hz 60, Amps 8.6, Capacity Cast Iron 5/8 In, Rpm 260, 400, 430, 560, 650, 680, 1260, 1440, 1620, 1950, 2270, 3080, Spindle Travel 3 1/4 In, Spindle To Table 29 In, Max Spindle To Base 46 1/2 In, Column Dia 2 7/8 In, Table Work Surface 10 1/2 X 10 1/2 In, Tilt Angle Left Or Right 45 Degrees, Overall Height 45 3/16 In, Overall Width 19 3/4 In, Overall Depth 13 In, Chuck Size 1/2 In, Includes Motor, Drill Chuck With Key, 6 Ft Power Cord Minimize

An amazingly low price on this extended drill press table T ... Read more

An amazingly low price on this extended drill press table This extended drill press table let you maximize the workspace - Visit Harbor Freight Tools For More Information. Minimize

Drill press fence makes repetitive work easy! Our Drill Pre ... Read more

Drill press fence makes repetitive work easy! Our Drill Press Fence attaches to the edge of our table, or your homemade one, with the included clamps. There are no slots in the table to wear out or fill with debris. This allows the fence to be removed or adjusted faster than any other method. Fence is 32" long and made of our Double Track aluminum extrusion. Fence can be mounted vertically (1-1/2" tall) or horizontally (3/4" tall) for optimum versatility. Longer track can be mounted in place of the standard track to extend the fence capacity. Fence includes two clamps with large 3"knobs that tighten over the edge of any drill press table 5/8" to 1-5/8" thick and up to 32" wide. Optional 1826VC Vise Grip Clamps, 1828 Table Extension, 4512 & 4514 Flip Stops, 4523 Micro Adjuster and a longer Double Track for the fence (4048 - 48", 4072 - 72" & 4096 - 96") available. Minimize

Floor Drill Press, Swing 20 In, Motor Hp 1, Voltage 120, Hz ... Read more

Floor Drill Press, Swing 20 In, Motor Hp 1, Voltage 120, Hz 60, Amps 16.0, Capacity Cast Iron 1 In, Rpm 150, 260, 300, 440, 490, 540, 1150, 1550, 2200, Spindle Travel 5 In, Spindle To Table 25 1/2 In, Max Spindle To Base 47 In, Column Dia 4 In, Table Work Surface 18 5/8 X 16 5/8 In, Overall Height 68 In, Overall Width 19 In, Overall Depth 34 In, Chuck Size 5/8 In, Includes Motor, Drill Chuck With Key, 6 Ft Power Cord Minimize