> door back plates

Door escutcheons in a pair of brass plated pressed steel do ... Read more

Door escutcheons in a pair of brass plated pressed steel door knob back plates with a 1/4" bevel and keyhole. Minimize

Door back plates like this brass hexagonal rosette are a wo ... Read more

Door back plates like this brass hexagonal rosette are a wonderful alternative to the round standards. Reproduced from an early 20th century original, it's made of solid, forged brass with a choice of finish. Not for use on pre-bored doors. Minimize

For 3/8??? & 1/2??? (10 & 12 mm) Tempered Glass Solid Forge ... Read more

For 3/8??? & 1/2??? (10 & 12 mm) Tempered Glass Solid Forged Brass Hinges With Square Corners & Edges Available in Several Finishes The CRL Cicero Series Shower Door Hinge features precision machined stainless steel components with mouse ear design for added holding strength. The Cicero Series has the same timeless styling as the Anaheim hinge, but with clean, rounded corners and beveled edges. It is self closing from 25 degrees to self centering 0 degree return. (5 degree positive closure and 45 degree configurations available) An allen wrench is included with each hinge. This series hinge conservatively rated at 40 pounds per hinge.Using two hinges with 3/8 to 1/2 inch glass (10 to 12 millimeters) the hinge will hold up to 80 pounds (36 kilograms) with a maximum width of 30 inches (762 millimeters).Using three hinges with 3/8 to 1/2 inch glass (10 to 12 millimeters) the hinge will hold up to 120 pounds (54 kilograms) with a maximum width of 36 inches (914 millimeters). Minimize

Bronze door plates in a bold and graphic Oriental pattern i ... Read more

Bronze door plates in a bold and graphic Oriental pattern is one of our favorites. Initially designed by Branford Lock Works, circa 1885, this striking back plate features an open fan, a rising sun, and bamboo. Cast from solid bronze with a highlighted antique finish Minimize

Broken Leaf Door Back Plates Solid Cast Bronze S Descriptio ... Read more

Broken Leaf Door Back Plates Solid Cast Bronze S Description: Beautiful pair of heavy cast bronze backplates. You will not be disappointed with these fine quality authentic reproductions. They are sand casted and each piece is hand finish, un-lacquered, so they will get a rich patina with time. Item sold as: One Pair (Two plates) Mounting screws included. Material: Solid cast bronze. Date: New Reproduction Dimensions: 2 1/4" wide by 6" Tall. Collar opening I.D. is 11/16". Minimize

These brass-plated New York back plates are an economical w ... Read more

These brass-plated New York back plates are an economical way to give your doors pure vintage style. Made of stamped steel, with a polished and lacquered brass plating. At 2 1/4" wide, they work on pre-drilled doors, as well as with most antique mortise locks.Dimensions: 7" H x 2 1/4" W. Inside collar diameter: 5/8". Center to center spacing of keyhole to knob collar: 2 1/4". This plate is wide enough to use on pre-bored doors. Minimize

Door back plates like this striking Deco back plate is idea ... Read more

Door back plates like this striking Deco back plate is ideal for homes of the 1920s and 30s. An authentic reproduction, it's made of heavy duty stamped brass with our living antique finish. It works with most vintage mortise locks or with modern pre-drilled doors. Matching prismatic knobs are available! Minimize

CRL Gold Plated Junior Contemporary Style Back-to-Back Show ... Read more

CRL Gold Plated Junior Contemporary Style Back-to-Back Shower Door Knobs The solid brass CRL Junior Contemporary Style Knob is a smaller version of our popular standard size Contemporary Knob. Knob stands 1-3/16" (30 mm) from the surface. Solid Brass Material Fits 1/4" to 1/2" (6 to 12 mm) Thick Glass Back-to-Back Knob SPECIFICATIONS: Material: Solid Brass Available Finishes: Brass, Chrome, Satin Chrome (Matte), Brushed Satin Chrome, Gold Plated, White, Polished Nickel, Brushed Nickel, and Oil Rubbed Bronze Glass Thickness Range: 1/4" to 1/2" (6 to 12 mm) Hole Diameter Required: 3/8" or 1/2" (10 or 12 mm) Catalog Number: SDK107GP Also Available in These Catalogs: CRL23 Shower Door and Mirror Hardware Catalog, PAGE J207 SD12 Frameless Shower Door 2012, PAGE S866 Color: Gold Plated Minimize

Door plates featuring this Windsor pattern escutcheon is on ... Read more

Door plates featuring this Windsor pattern escutcheon is one of our finest Victorian era reproductions. Introduced by Reading Hardware around 1885, the whimsical Aesthetic design is just as fresh and lovely today. Made of solid cast brass and finished with our living antique patina. Minimize

Victorian escutcheon that is pretty and petite, this Victor ... Read more

Victorian escutcheon that is pretty and petite, this Victorian back plate is perfect for narrow French doors. Paired with lever handles or crystal knobs, it's a lovely addition to your home. Reproduced in stamped brass from a circa 1900 original Minimize

Adjustable to Any Angle up to 90o without Having to Take Do ... Read more

Adjustable to Any Angle up to 90o without Having to Take Door Down Available in Several Beautiful Finishes 3 Year Warranty The CRL Adjustable Geneva Series has taken our popular Geneva Hinge to a new level. Adjustment to accommodate the desired angle (up to 90o) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closing position. The door can swing 90o inward and 90o outward(adjusting angle from factory set position will reduce 90o swing in that direction). For doors pulling outwards only(using a clear door jamb), you can adjust the hinge to close 5o inside the shower area, thus having the door close snugly against the jamb. SPECIFICATIONS:Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety GlassSpecial Features: Adjustable to any angle up to 90o without having to take door downConstruction: Solid Brass Hinge Swings: 90o in and 90o out (at factory set position)Closing Type: Self-Centering when within 15o of closed position Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication DimensionsNOTE: Door glass width may require alteration from standard clearance deductions when adjusting angles. Call for details. Minimize

Vintage door parts like this New York style back plate is d ... Read more

Vintage door parts like this New York style back plate is designed for the interior side of a bedroom or bathroom door. It features a classic crescent thumb to activate the privacy mortise lock from inside the room. Made of solid, wrought brass in 4 finishes. Minimize

Pretty and petite, this Victorian back plate is perfect for ... Read more

Pretty and petite, this Victorian back plate is perfect for narrow French doors. Paired with lever handles or crystal knobs, it's a lovely addition to your home. Reproduced in stamped brass from a circa 1900 original.Dimensions: 4 3/4" H x 1 1/4" W (at the widest point). Inside collar diameter: 3/4". Center to center spacing of keyhole to knob collar: 2 1/4". Minimize

Keep your parts from rolling off the sides or back of your ... Read more

Keep your parts from rolling off the sides or back of your workbench with these workbench back or end plates. These pieces easily mount to the rear or sides of any workbench surface. All plates are 4-1/2" high and are formed with a fold for added rigidity. - - Specs: - 18 Gauge Minimize

Old door handles like this large and simple door pull with ... Read more

Old door handles like this large and simple door pull with backplate is designed for commercial or residential interiors. Made of solid, non-corrosive brass, it's durable enough for high traffic areas. Coordinating push plate available. Minimize

http://www.flyingbulldogs.com/EbayImages/cm.114-11666.jpg

Baldwin Lexington Door Pull With Plates - 6.5" - Shipped Wi ... Read more

Baldwin Lexington Door Pull With Plates - 6.5" - Shipped With Thru Bolts For 1.75" Thick Doors. - Not Available Back-to-back Mounted. - Shown In Oil Rubbed Bronze [102] Minimize

CRL Gold Plated Traditional Style Back-to-Back Shower Door ... Read more

CRL Gold Plated Traditional Style Back-to-Back Shower Door Knobs Our solid brass CRL Traditional Style Knobs are available in over 20 popular finishes. Overall diameter of knob is 1-9/16" (40 mm), overall height is 1" (25 mm) from glass. End cap for Single-Sided Knob stands 1/4" (6 mm) from the door surface. Solid Brass Material Fits 1/4" to 1/2" (6 to 12 mm) Thick Glass Back-to-Back Knob SPECIFICATIONS: Material: Solid Brass Available Finishes: Brass, Chrome, Satin Brass, Satin Chrome (Matte), Minimize

Antique pulls featuring a classic rope border and a shapely ... Read more

Antique pulls featuring a classic rope border and a shapely, turned handle, this elegant door pull is eminently suited to traditional style homes. Cast from solid brass, it's durable enough for high traffic areas and commercial applications. Offered in eight favorite finishes! Minimize

Antique handles featuring a classic rope border and a shape ... Read more

Antique handles featuring a classic rope border and a shapely, turned handle, this elegant door pull is eminently suited to traditional style homes. Cast from solid brass, it's durable enough for high traffic areas and commercial applications. Offered in eight favorite finishes! Minimize

Letter Box Plate Magazine Size - Spring Tension Design WITH ... Read more

Letter Box Plate Magazine Size - Spring Tension Design WITH COVERED HINGING BACK PLATE, Heavy Duty Wrought Brass Size: Overall measurements: 10" x 3". Inside opening: 7.5" x 2". Features: Especially designed for use on exposed doors to prevent wind from driving rain and snow through the slot. The flap is furnished with a spring to keep it tightly closed at all times. Hinging back plate provides additional privacy as well as decorative appearance. Not suitable for vertical installation (see Baldwin item No. 0012). Sleeve: Available for hollow core doors. See Baldwin item No. 0050 (purchased separately). Packed: One complete set in a box with wood screws. Note: For same item without hinging back plate please see Baldwin item No. 0015. Minimize

Add the perfect mix of quiet simplicity and understated con ... Read more

Add the perfect mix of quiet simplicity and understated contemporary designing with this Donnabella dining set. This five-piece set features chrome plated leatherette upholstered chairs and a round glass table. Set includes: One (1) dining table and four (4) dining chairs Materials: Solid wood, MDF, chrome-plated steel, leatherette, glass Table base finish: Glossy Chair leg finish: Chrome-plated steel Cushion type: Tight Upholstery materials: Leatherette Upholstery color options: Black, white Clear round glass top reveals the industrial wonder of our modern dining set Round table has a .5 inch thick clear glass top Four sleek chrome-plated steel legs Streamlined continuous leatherette chair suits and seats all sizes Steel sleigh frame Extra padded upholstered seat and back Table seats: 4-5, comfortably Felt pads recommended for chairs Table dimensions: 45 inches diameter x 30 inches high Chair Dimensions: 33 inches high x 21.5 inches wide x 20 inches deep Assembly Required. This product ships in four (4) boxes Clean & Care Suggestions: Avoid placing furniture in direct sunlight and maintain at least two feet between furniture and heat sources to prevent color fading. Clean top with a glass cleaner, dust base with a soft dry cloth. Note: This product will shipped using Threshold delivery. The product will be delivered to your door or the nearest ground-level entrance of your residence. Signature required upon delivery. Minimize

???N??? Series Push Plates Typically used for mounting on n ... Read more

???N??? Series Push Plates Typically used for mounting on narrow door frames and aluminum mullions, the ???N??? style devices consist of the standard 1-1/2??? x 3??? push plate mated with a narrow 1-3/4??? wide back plate for hollow metal or aluminum frame mounting. Furnished with slotted oval head stainless steel screws for direct mounting to frame or partition box within frame. All switches are furnished with 8??? long color-coded stranded wire leads for ease of identification and hook-up. Push plate switch assemblies shall be be flush wall mounted to standard, recess mounted, electrical boxes. Mounting screws shall be slotted oval head stainless steel. Pin-in-hex tamper resistant screws shall be supplied where required. The City of New York MEA Approved UL Listed Minimize

Keep your parts from rolling off the sides or back of your ... Read more

Keep your parts from rolling off the sides or back of your workbench with these workbench back or end plates. These pieces easily mount to the rear or sides of any workbench surface. All plates are 4-1/2" high and are formed with a fold for added rigidity. - - Specs: - 18 Gauge Minimize

Door mail slot in a timeless design, great finishes and top ... Read more

Door mail slot in a timeless design, great finishes and top quality brass construction make this our most popular style of mail slot. The open back plate model is a good option for businesses or home locations where privacy is not a concern (such as a vestibule or closet). Classic medium size. Minimize