> dma controller

Mfr Part Number: 9650SE-8LPML SGL Features: 8th-generation ... Read more

Mfr Part Number: 9650SE-8LPML SGL Features: 8th-generation StorSwitch non-blocking switched architecture On-board I/O RISC processor and RAID offload provides true hardware RAID: SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives Bootable array support for greater fault tolerance Variable stripe size for performance tuning by application 64-bit LBA support ATA pass-through mode support 256MB DDR2-533 memory with ECC protection 32 pooled DMA channels Complete configuration management suite: 3ware BIOS Manager 2 (3BM2) - easy to use BIOS configuration tool 3ware Disk Manager 2 (3DM2) - browser-based management tool Command Line Interface (CLI) - scriptable configuration tool SNMP support SMTP support for email/pager notification ATA/6 and Out of band (OOB) staggered drive spin-up support Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN Battery Backup Unit (BBU) support Multiple logical unit sizes and RAID levels on one card Multiple card support within a system for large storage requirements Hot-swap and hot-spare support for data availability Dynamic sector repair for robust data protection S.M.A.R.T. disk drive monitoring for reliability Emergency Flash Recovery protects against failed firmware upgrade Drive activity LED support Online Capacity Expansion and RAID Level Migration Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal Drive insertion and removal notification Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane) Chassis Control Unit for enclosure management via I2C Port: 8x SATA; Serial ATA 2.6 Specification support Host Interface: PCI Express x4; PCI Express 1.1 compliant Raid Levels: 0; 1; 5; 6; 10; 50; Single Disk; JBOD Onboard Memory: 256MB DDR2-533 Connector Type: Multi-lane BBU Support: Yes BIOS PnP (plug and play) and BBS (BIOS boot specification) support Power Requirements: 18W maximum Form Factor: Low Profile Dimension (LxH): 7.3 x 2.73 inch / 18.54 x 6.93 cm Package: OEM Minimize

Mfr Part Number: 9650SE-8LPML KIT Features: 8th-generation ... Read more

Mfr Part Number: 9650SE-8LPML KIT Features: 8th-generation StorSwitch non-blocking switched architecture On-board I/O RISC processor and RAID offload provides true hardware RAID: SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives Bootable array support for greater fault tolerance Variable stripe size for performance tuning by application 64-bit LBA support ATA pass-through mode support 256MB DDR2-533 memory with ECC protection 32 pooled DMA channels Complete configuration management suite: 3ware BIOS Manager 2 (3BM2) - easy to use BIOS configuration tool 3ware Disk Manager 2 (3DM2) - browser-based management tool Command Line Interface (CLI) - scriptable configuration tool SNMP support SMTP support for email/pager notification ATA/6 and Out of band (OOB) staggered drive spin-up support Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN Battery Backup Unit (BBU) support Multiple logical unit sizes and RAID levels on one card Multiple card support within a system for large storage requirements Hot-swap and hot-spare support for data availability Dynamic sector repair for robust data protection S.M.A.R.T. disk drive monitoring for reliability Emergency Flash Recovery protects against failed firmware upgrade Drive activity LED support Online Capacity Expansion and RAID Level Migration Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal Drive insertion and removal notification Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane) Chassis Control Unit for enclosure management via I2C Form Factor: Low Profile Port: 8x SATA; 2.6 Specification support Host Interface: PCI Express x4; PCI Express 1.1 compliant Raid Levels: 0; 1; 5; 6; 10; 50; Single Disk; JBOD Onboard Memory: 256MB DDR2-533 Connector Type: Multi-lane BBU Support: Yes BIOS PnP (plug and play) and BBS (BIOS boot specification) support Power Requirements: 18W maximum Dimension (LxH): 7.3 x 2.73 inch / 18.54 x 6.93 cm Minimize

Mfr Part Number: 9650SE-4LPML SGL Features: 8th-generation ... Read more

Mfr Part Number: 9650SE-4LPML SGL Features: 8th-generation StorSwitch non-blocking switched architecture On-board I/O RISC processor and RAID offload provides true hardware RAID: SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives Bootable array support for greater fault tolerance Variable stripe size for performance tuning by application 64-bit LBA support ATA pass-through mode support 256MB DDR2-533 memory with ECC protection 32 pooled DMA channels Complete configuration management suite: 3ware BIOS Manager 2 (3BM2) - easy to use BIOS configuration tool 3ware Disk Manager 2 (3DM2) - browser-based management tool Command Line Interface (CLI) - scriptable configuration tool SNMP support SMTP support for email/pager notification ATA/6 and Out of band (OOB) staggered drive spin-up support Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN Battery Backup Unit (BBU) support Multiple logical unit sizes and RAID levels on one card Multiple card support within a system for large storage requirements Hot-swap and hot-spare support for data availability Dynamic sector repair for robust data protection S.M.A.R.T. disk drive monitoring for reliability Emergency Flash Recovery protects against failed firmware upgrade Drive activity LED support Online Capacity Expansion and RAID Level Migration Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal Drive insertion and removal notification Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane) Chassis Control Unit for enclosure management via I2C Port: 4x SATA; Serial ATA 2.6 Specification support Host Interface: PCI Express x4; PCI Express 1.1 compliant Raid Levels: 0; 1; 5; 10; Single Disk; JBOD Onboard Memory: 256MB DDR2-533 Connector Type: Multi-lane BBU Support: Yes BIOS PnP (plug and play) and BBS (BIOS boot specification) support Power Requirements: 18W maximum Form Factor: Low Profile Dimension (LxH): 7.3 x 2.73 inch / 18.54 x 6.93 cm Package: OEM Minimize

Powered by state-of-the-art WiVi technology, vStar DMA3000 ... Read more

Powered by state-of-the-art WiVi technology, vStar DMA3000 delivers video and audio signals wirelessly over distance while maintaining their original quality. It enables a wireless connection between video/audio sources (DVD, DVR, STB, camera, etc.) and a video/audio display (TV, flat panel or video monitor). Plug and play with most of the A/V devices. No hassle for software and network setting. Whole home coverage. No interference from other wireless devices. Low video latency. MPEG-2 standard video compression and decompression. Auto detection of NTSC and PAL. Built-in infrared extender. - Day-and-night difference in users experence, video quality, and wireless range compared to other analog video sender products in the market. - DMA3000T&R set includes: 1 A/V Sender, 1 A/V Receiver, 2 Base units, 1 IR extender, 2 A/V composite cables (RCA), 2 AC power adaptors, and User's manual. - For more info, please visit www.amedia-networks.com Minimize

Mfr Part Number: LSI00199 Feature: 6Gb/s data transfer rate ... Read more

Mfr Part Number: LSI00199 Feature: 6Gb/s data transfer rate Four internal 6Gb/s SATA+SAS ports One x4 mini-SAS internal connectors (SFF8087) LSISAS2008 controller RAID levels 0; 1; 5; 10; 50 and JBOD mode Hardware RAID solution x8 PCI Express 2.0 host interface Low-profile form factor Supports up to 64 physical devices; Up to 16 physical devices in RAID configuration Patrol read Consistency Check S.M.A.R.T error detection Power management support MegaRAID Storage Manager Environmentally friendly with a low-power controller and cardboard packaging Connectors: 1x X4 Mini SAS SFF8087 4i internal connectors(vertical orientation) Max Number of Physical Devices: Non-Raid- 64; RAID 0- 16 per volume; RAID 1- 2 per volume plus hotspare; RAID 5- 16 per volume; RAID 10- 16 per volume; RAID 50- 16 per volume Host Bus Type: PCI-Express 2.0 x8 Data Transfer Rates: Up to 6Gb/s per port SAS Controller: LSISAS2008 RAID Data Protection Features: RAID levels 0; 1; 5; 10; 50 and JBOD mode Selectable logical drive as boot drive Consistency Check Fast initialization for quick array setup Native Command Queuing Staggered spin up for SATA drives Hot plug support Global hot spare support Online Capacity Expansion (OCE) Online RAID Level Migration (RLM) Single controller Multipathing I/O Load balancing SSD support with SSD Guard Automatic rebuild of hot spare drives Auto resume during array rebuild Fault LED support through SGPIO >2TB logical drive support Soft bad block management Error recovery support DDF compliant Configuration on Disk S.M.A.R.T. support Patrol read for media scanning and repairing Enclosure management- SES (inband); SGPIO (sideband) PCI Card Type: 3.3V Add-in Card PCI Voltage: +12V+/-10% PCI Power: 13.5W PCI Modes: Bus Master DMA LED Indicators: Internal- Activity/Fault per x4 port - Hearbeat MTFB: >2;000;000 Hours RAID Management(MegaRAID Management Suite): MegaRAID Storage Manager; MegaCLI (command-line interface); WebBIOS OS Support: Microsoft Windows; Linux (SuSE; Red Hat); Solaris; Vmware Brackets: Full Height and Low-Profile Dimensions: Low profile (6.6 x 2.536 inch) Package Content: MegaRAID SAS 9240-4I; QIG; LP bracket; Driver & Documentation CD Minimize

YOU ARE BUYING A NEW OPEN BOX Koutech PSA150 PCI SATA Contr ... Read more

YOU ARE BUYING A NEW OPEN BOX Koutech PSA150 PCI SATA Controller Card Model PSA150 Specifications Type SATA Internal Connectors 2 x SATA 150 Interface PCI Transfer Rate 150MB/sec RAID RAID 0/1 Operating Systems Supported Windows 98SE/Me/NT 4.0/2000/XP/Server 2003/Vista/Server 2008/7 and Linux. Features Features Dual Channel Serial ATA PCI Host Controller. Dual independent DMA channels w/256 bytes FIFO per channel. Supports PIO and DMA modes. Supports hard disk drive size up to 1.5TB (1500GB) *Card's Bios version must be at least version 4.3.79. ACPI: PCI Bus Power Management Specification 1.1 compliant 32-bit 33/66MHz PCI bus PCI specification v2.2 compliant Supports high performance Serial ATA devices; such as, hard disk drives, SATA enclosures, and other devices. System Requirements: PC with 64MB of RAM and 300MHz or faster processor. One available PCI slot with PCI specification v2.1 or above. Minimize

3WARE 9650SE-24M8-SGL PCIEX8 HALF-LENGTH 24-PORT MULTI-LANE ... Read more

3WARE 9650SE-24M8-SGL PCIEX8 HALF-LENGTH 24-PORT MULTI-LANE SATAII HARDWARE RAID CARD 512 MB (9650SE-24M8-SGL) (New-Retail) 3WARE 9650SE-24M8-SGL PCIEX8 HALF-LENGTH 24-PORT MULTI-LANE SATAII HARDWARE RAID CARD 512 MB (9650SE-24M8-SGL) (New-Retail) S pecification: Description: AMCC 3ware 9650SE SATA II hardware RAID controllers deliver industry-leading RAID 6 and RAID 5 performance, robust fault tolerance, and multi-terabyte capacities. Features: 8th-generation StorSwitch non-blocking switched architecture Variable stripe size for performance tuning by application 64-bit LBA support ATA pass-through mode support Upto 512MB DDR2-533 memory with ECC protection. (see table below) 32 pooled DMA channels Drive insertion and removal notification Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane) Form Factor: Full height Raid Levels: 0, 1, 5, 6, 10, 50, Single Disk, JBOD Onboard Memory: 512MB DDR2-533 Minimize

Wire Cloth, Plain Weave, Stainless Steel Material, Alloy Ty ... Read more

Wire Cloth, Plain Weave, Stainless Steel Material, Alloy Type 304, Plain Finish, Mesh Size 4 X 4, Mesh Size Range Coarse, Wire Dia 0.0540 In, Opening Size 0.1960 In, Open Area 61.4 %, Width 24 In, Length 24 In Minimize

One Piece Portion Controller-Solid-3 oz.

Overview The JM20330 is a single chip solution for serial ... Read more

Overview The JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 JM20330 supports a 1.5GHz data rate, and scalable to 3.0 GHz data rate by directly doubling the internal clock source. The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin. Feature Compliance Serial ATA 1.0 Specification compliant Overall Automatic Serial ATA 3.0/1.5 Gbps speed negotiation ATA/ATAPI PIO mode 0 to 4 ATA/ATAPI Ultra DMA of transfer rate 16.7, 25, 33, 48, 66, 100, 133, and 150MB/s ATA/ATAPI LBA48 addressing mode associated with 2-byte sector count Support Serial ATA hot-plug Ultra low power consumption Work for both AC and DC couple between the transmitter and the receiver Provide specified OOB signal detection and transmission Support Spread Spectrum Clocking to reduce EMI Support 20MHz, 25MHz, 30MHz or 40MHz Reference Clock Support Partial/Slumber power management Provide adjustable TX signal amplitude and pre-emphasis level Master IDE Device support Product Requirements Windows 98/SE/ME/2000/XP/2003/Vista/Linux operating system Available 4-pin power supply connector SATA I or SATA II Device Minimize

Wire Cloth, Plain Weave, Stainless Steel Material, Alloy Ty ... Read more

Wire Cloth, Plain Weave, Stainless Steel Material, Alloy Type 304, Plain Finish, Mesh Size 4 X 4, Mesh Size Range Coarse, Wire Dia 0.0630 In, Opening Size 0.1870 In, Open Area 56.0 %, Width 24 In, Length 24 In Minimize

One Piece Portion Controller-Solid-4 oz.

Internal Connectors: 4 x Multi-laneRAID: RAID 0 1 5 6 10 50 ... Read more

Internal Connectors: 4 x Multi-laneRAID: RAID 0 1 5 6 10 50 Single Disk JBODCache Memory: 256 MB DDR2 533Operating Systems Supported: Microsoft Windows 2003/XP/2000 Red Hat Linux SuSE Linux Fedora Linux 2.4 Linux kernel 2.6 Linux kernel FreeBSD; 32/64-bit driver support for Windows Linux and FreeBSDFeatures: Form Factor : Full Height Port Count: 16 Connector Type: Multi-lane BBU Support: Yes 8th-generation StorSwitch non-blocking switched architecture. On-board I/O RISC processor and RAID offload provides true hardware RAID. Bootable array support for greater fault tolerance. Variable stripe size for performance tuning by application. 64-bit LBA support. ATA pass-through mode support. 32 pooled DMA channels. Complete configuration management suite. SNMP support. SMTP support for email/pager notif... Minimize

Compaq raises the bar in overall Token Ringcontroller value ... Read more

Compaq raises the bar in overall Token Ringcontroller value (price:performance) with the Netelligent 4/16 TR ISA UTP/STPController. The industry's first Plug and Play ISA Token Ring controller offersthe ultimate in ease of installation and use. This 4/16Mb/s Token Ringcontroller goes beyond software configuration to provide auto configuration-aPlug and Play computer automatically configures the settings for DMA channelIRQ and Base I/O address. Exceptional performance is achieved through theutilization of both bus-mastering design and Compaq's exclusive Scalable ClockArchitecture. Bus-mastering technology will maximize throughput and minimize CPUutilization. For units that do not support bus-mastering Compaq also supports16-bit programmed I/O data transfers. Scalable Clock Architecture allows for thefrequency adjustment of the onboard clock to either 4 or 6 MHz therebyincreasing the packet processing rate capability by over 40% for improvednetwork throughput. These controllers ship with NICStart an intuitive menudriven installation configuration and diagnostics utility that minimizes thetime necessary to install configure and test the controller. NICStart supportand Plug and Play compatibility ensure the highest level of ease-of-useavailable. An enhanced performance driver suite provides support for most majornetwork operating systems including Novell NetWare Windows NT Windows 95Windows for Workgroups and others. The Netelligent 4/16 TR ISA UTP/STPController is fully tested for use in both Compaq and non-Compaq platforms.SPECIFICATIONS:Bus typeBus type : ISACompatibilityOS Compatibility : Windows 95 Windows NT 4.0 Windows V3.1and V3.11ManageabilityManageability : SNMP managableNetwork portsPort Type : Token-RingWarranty informationWarranty terms : Three year limited warranty Minimize

One Piece Portion Controller-Perforated-3 oz.