> compaq 2m sw lc lc fc cable kit usa

CableWholesale carries high-quality fiber optic cables incl ... Read more

CableWholesale carries high-quality fiber optic cables including this 10 gigabit rated LC/LC cable with an Aqua Blue colored jacket. Multimode cables can come with many different fiber optics connector types and a couple different core sizes. This particular 10 gigabit Multimode fiber optic cable offers LC connectors, is duplex, and has a 50/125 micron core. A cable with these LC fiber connectors would typically be used for data Minimize

LC-LC 10 Gigabit Multimode 24 Strand Breakout 50/125 Fiber ... Read more

LC-LC 10 Gigabit Multimode 24 Strand Breakout 50/125 Fiber Cable, 12M Data Transfer Rate: 10 Gb/s, 1000Base-SX 24 Strands / 12" Breakout Core Size: 50 Connector Details:  LC to LC 24 connectors per end Cable Length: 12.19 Meter (40.0 ft) Color: Aqua Minimize

LC equip to LC Multimode 50/125 Mode Conditioning Patch Cab ... Read more

LC equip to LC Multimode 50/125 Mode Conditioning Patch Cable 3 metersFiberStore.COM manufacture and supply standard and custom length 50/125, 62.5/125 and OEM equivalent mode conditioning fiber optic patch cords for 1000BASE-LX Gigabit Ethernet (1300nm long wavelength) applications. These cables are available with ST, SC, LC and MT-RJ connectors.Mode conditioning fiber patch cables, also known as conditioned launch fiber cables, are used specifically in Gigabit Ethernet 1000BASE-LX (and 1000Base-LH) applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones. Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short wavelength window such as 1000Base-SX. Also, any attempt to connect 1000Base-LX/LH equipment over short distances of multimode fiber without the use of mode conditioning fiber will result in a high bit error rate, and eventually damage to the device.Use in place of standard equipment-to-cable plant patch cordIEEE-802.3z Gigabit EthernetNo large splice tube enabling small space installationNotes for using mode conditioning cables to patch an existing multimode cable plant to your Gigabit LX equipmentMode conditioning cable are normally used in pairs. That means that you will need a Mode Conditioning patch cable at each end to connect the equipment to the cable plant. So then these cables are usually ordered in even numbers. The usual reason why someone may order one cable is so they may keep it as a spare. If your gigabit LX switch is equipped with SC or LC connectors, please be sure to connect the yellow leg (Singlemode) of the cable to the transmit side, and the orange leg (multimode) to the receive side of the equipment. It is imperative that this configuration be maintained on both ends. The swap of transmit and receive can only be done at the cable plant side.SpecificationsFiber Type: 50/125um Connector: LC equipment to LC Length: 3 meters Minimize

Optical Attenuator LC-LC 5dB Feature:Excellent Environmenta ... Read more

Optical Attenuator LC-LC 5dB Feature:Excellent Environmental StabilityAttenuation Stability Polarization Insensitive Easy Installation Telecordia GR-910-core Requirement Applications: Telecommunications System Local Area Networks CATV Subscribe Loop Test Equipment Optical Fiber Sensors Specification: Wavelength: 1310/ 155040nmInsertion Loss: 1~5dB 0.75 6~10dB 1.0 11~15dB 15% Return Loss: PC>55 dB ; APC>65 dBTemperature ranges and humidity: Storage temperature -40°C to +80°C Operating temperature -40°C to +75°C Test Condition: All tests shall be performed as below conditions unless otherwise specified. Temperature range: 23C2C (73F4F)Humidity range: less than 75% RH Minimize

LC equip to SC Multimode 50/125 Mode Conditioning Patch Cab ... Read more

LC equip to SC Multimode 50/125 Mode Conditioning Patch Cable 3 metersFiberStore.COM manufacture and supply standard and custom length 50/125, 62.5/125 and OEM equivalent mode conditioning fiber optic patch cords for 1000BASE-LX Gigabit Ethernet (1300nm long wavelength) applications. These cables are available with ST, SC, LC and MT-RJ connectors.Mode conditioning fiber patch cables, also known as conditioned launch fiber cables, are used specifically in Gigabit Ethernet 1000BASE-LX (and 1000Base-LH) applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones. Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short wavelength window such as 1000Base-SX. Also, any attempt to connect 1000Base-LX/LH equipment over short distances of multimode fiber without the use of mode conditioning fiber will result in a high bit error rate, and eventually damage to the device.Use in place of standard equipment-to-cable plant patch cordIEEE-802.3z Gigabit EthernetNo large splice tube enabling small space installationNotes for using mode conditioning cables to patch an existing multimode cable plant to your Gigabit LX equipmentMode conditioning cable are normally used in pairs. That means that you will need a Mode Conditioning patch cable at each end to connect the equipment to the cable plant. So then these cables are usually ordered in even numbers. The usual reason why someone may order one cable is so they may keep it as a spare. If your gigabit LX switch is equipped with SC or LC connectors, please be sure to connect the yellow leg (Singlemode) of the cable to the transmit side, and the orange leg (multimode) to the receive side of the equipment. It is imperative that this configuration be maintained on both ends. The swap of transmit and receive can only be done at the cable plant side.SpecificationsFiber Type: 50/125um Connector: LC equipment to SC Length: 3 meters Minimize

CableWholesale carries high-quality fiber optic cables incl ... Read more

CableWholesale carries high-quality fiber optic cables including this 10 gigabit rated LC/LC cable with an Aqua Blue colored jacket. Multimode cables can come with many different fiber optics connector types and a couple different core sizes. This particular 10 gigabit Multimode fiber optic cable offers LC connectors, is duplex, and has a 50/125 micron core. A cable with these LC fiber connectors would typically be used for data Minimize

62.5/125mm LC-LC Fibre Cable Cable - 2m/6ft - Brand New

Fiber Optic Patch Cable, Connector Type Lc/lc, Single Mode, ... Read more

Fiber Optic Patch Cable, Connector Type Lc/lc, Single Mode, Length 3m, Core Dimension 9, Jacket Color Yellow, Jacket Type Pvc, Clad Dimension 125, Attenuation 10gb, Bandwidth 10gb Minimize

Black finish perfect for darker wood cabinets Can be surfac ... Read more

Black finish perfect for darker wood cabinets Can be surface or recess mounted Requires 3 20-watt halogen bulbs (included) 3-light, low voltage halogen puck lights Dimmable with Westek A6043CS touch pad dimmer (sold separately) Minimize

LC equip to MTRJ Multimode 50/125 Mode Conditioning Patch C ... Read more

LC equip to MTRJ Multimode 50/125 Mode Conditioning Patch Cable 3 metersFiberStore.COM manufacture and supply standard and custom length 50/125, 62.5/125 and OEM equivalent mode conditioning fiber optic patch cords for 1000BASE-LX Gigabit Ethernet (1300nm long wavelength) applications. These cables are available with ST, SC, LC and MT-RJ connectors.Mode conditioning fiber patch cables, also known as conditioned launch fiber cables, are used specifically in Gigabit Ethernet 1000BASE-LX (and 1000Base-LH) applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones. Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short wavelength window such as 1000Base-SX. Also, any attempt to connect 1000Base-LX/LH equipment over short distances of multimode fiber without the use of mode conditioning fiber will result in a high bit error rate, and eventually damage to the device.Use in place of standard equipment-to-cable plant patch cordIEEE-802.3z Gigabit EthernetNo large splice tube enabling small space installationNotes for using mode conditioning cables to patch an existing multimode cable plant to your Gigabit LX equipmentMode conditioning cable are normally used in pairs. That means that you will need a Mode Conditioning patch cable at each end to connect the equipment to the cable plant. So then these cables are usually ordered in even numbers. The usual reason why someone may order one cable is so they may keep it as a spare. If your gigabit LX switch is equipped with SC or LC connectors, please be sure to connect the yellow leg (Singlemode) of the cable to the transmit side, and the orange leg (multimode) to the receive side of the equipment. It is imperative that this configuration be maintained on both ends. The swap of transmit and receive can only be done at the cable plant side.SpecificationsFiber Type: 50/125um Connector: LC equipment to MTRJ Length: 3 meters Minimize

The LC-20 is another great lift chair from the Classic Line ... Read more

The LC-20 is another great lift chair from the Classic Line by Pride Mobility that offers superb comfort and support at a very affordable price. The LC-20 is an excellent 2-position lift chair. It comes standard with an overstuffed blown-fiber pillow back that provides the perfect blend of comfort and support. Additional benefits of the LC-20 include: 40 fabric choices, a great warranty, 375 lb. weight capacity, and an integrated emergency battery-back in case of power failure.*Formerly the C-20. Minimize

CableWholesale carries high-quality fiber optic cables incl ... Read more

CableWholesale carries high-quality fiber optic cables including this 10 gigabit rated LC/LC cable with an Aqua Blue colored jacket. Multimode cables can come with many different fiber optics connector types and a couple different core sizes. This particular 10 gigabit Multimode fiber optic cable offers LC connectors, is duplex, and has a 50/125 micron core. A cable with these LC fiber connectors would typically be used for data Minimize

LC-LC 10 Gigabit Multimode Duplex 50/125 Fiber Patch Cable, ... Read more

LC-LC 10 Gigabit Multimode Duplex 50/125 Fiber Patch Cable, 25M (82.02 ft) Data Transfer Rate: 10 Gb/s, 1000Base-SX Core Size: 50 Connector Details: LC to LC Cable Length: 25 Meter (82.02 ft) Color: Aqua Minimize

LC equip to SC Multimode 62.5/125 Mode Conditioning Patch C ... Read more

LC equip to SC Multimode 62.5/125 Mode Conditioning Patch Cable 3 metersFiberStore.COM manufacture and supply standard and custom length 50/125, 62.5/125 and OEM equivalent mode conditioning fiber optic patch cords for 1000BASE-LX Gigabit Ethernet (1300nm long wavelength) applications. These cables are available with ST, SC, LC and MT-RJ connectors.Mode conditioning fiber patch cables, also known as conditioned launch fiber cables, are used specifically in Gigabit Ethernet 1000BASE-LX (and 1000Base-LH) applications where the objective is deploying new high-speed 1000BASE-LX routers, switches, or transceivers within existing multimode system backbones. Mode conditioning fiber jumpers are used in the 1300nm or 1310nm optical wavelength window, and should not be used for 850nm short wavelength window such as 1000Base-SX. Also, any attempt to connect 1000Base-LX/LH equipment over short distances of multimode fiber without the use of mode conditioning fiber will result in a high bit error rate, and eventually damage to the device.Use in place of standard equipment-to-cable plant patch cordIEEE-802.3z Gigabit EthernetNo large splice tube enabling small space installationNotes for using mode conditioning cables to patch an existing multimode cable plant to your Gigabit LX equipmentMode conditioning cable are normally used in pairs. That means that you will need a Mode Conditioning patch cable at each end to connect the equipment to the cable plant. So then these cables are usually ordered in even numbers. The usual reason why someone may order one cable is so they may keep it as a spare. If your gigabit LX switch is equipped with SC or LC connectors, please be sure to connect the yellow leg (Singlemode) of the cable to the transmit side, and the orange leg (multimode) to the receive side of the equipment. It is imperative that this configuration be maintained on both ends. The swap of transmit and receive can only be done at the cable plant side.SpecificationsFiber Type: 62.5/125um Connector: LC equipment to SC Length: 3 meters Minimize