> Cellular Accessories > Other Antennas > Wilson Electronics

Wilson 801212 Dual Band Mobile Wireless 824-894/1850-1990 A ... Read more

Wilson 801212 Dual Band Mobile Wireless 824-894/1850-1990 Amplifier Kit (Includes: 12" Magnet Mount Antenna, 301103) - WIRELESS MOBILE AMPLIFIERS (WILSON ) Sometimes incorrectly referred to, as Wilson 801211, the correct part number is Wilson 801212. Minimize

The Dual Band Cellular Glass Mount High-Gain Antenna comes ... Read more

The Dual Band Cellular Glass Mount High-Gain Antenna comes with 14' Coax, works on th 806-894 MHz / 1850-1990 MHz is a 50 ohm Antenna with FME Female Connector, Glass Mounting with 3-M Adhesive, is 15-Inch high, with a Stainless Steel Whip and has a built in ground plane with 3.5 dBi 806-894 MHz and 4.8 dBi 1850-1990 MHz Antenna Gain. Call our fully staffed Tech Department for questions or help at 866-294-1660. Minimize

When using a Wilson amplifier in conjunction with Wilson an ... Read more

When using a Wilson amplifier in conjunction with Wilson antennas, the outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then amplified and broadcast from the inside antenna to the surrounding area. Cell phones and cellular data cards in that area then communicate with the improved signal. When a cell phone or cellular device transmits, the signal is received by the inside antenna, amplified by the amplifier and broadcast back to the cell tower through the outside antenna. 50 Feet minimum separation between inside and outside antenna for 50 dB cellular amplifier. Coax antenna cables 20, 30, 50, 75 and 100 feet long are required for installation (sold separately). 800MHz systems work for cellular systems using the 824MHz - 896MHz band. The band that your carrier is using depends on your zip code. In particular, this system is not compatible with iDEN (Nextel, Southern LINC, Mike) and PCS only carriers such as Sprint PCS and T-Mobile. Minimize

This powerful booster enable cell phone and data card users ... Read more

This powerful booster enable cell phone and data card users to extend their signal range, reduce dropped calls, and increase data rates with no physical connection to cell phone or data card. And, because it's wireless this amplifier support multiple users simultaneously. How it works The outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then boosted and sent to the inside antenna. Your cell phone or data card then communicates with the improved signal. When the cell phone or data card transmits, the signal goes through the inside antenna or is boosted by the amplifier and broadcast back to the cell tower through the outside antenna. More Features: * Passes TIA/EIA-98-E Transmit test for evaluation CDMA Cellular Phones * Power Control Logic ensures maximum output power is within Cellular Standards * Allows cellular phone to operate properly with all types of modulations including CDMA * Maximum 3 Watts output power * Designed for all cellular systems: AMPS, CDMA, EDGE, GPRS, GSM and TDMA * Automatic Gain Control * Overload Protection Circuit - Protects cell system from overload * Automatic Reset - if overload occurs * FCC Type Accepted *DC power supply included - AC power supply sold separately *Slim low profile inside antenna included in the retail box (301127) Minimize

This powerful booster enable cell phone and data card users ... Read more

This powerful booster enable cell phone and data card users to extend their signal range, reduce dropped calls, and increase data rates with no physical connection to cell phone or data card. And, because it's wireless this amplifier support multiple users simultaneously. How it works The outside antenna will collect the cell tower signal and send it through the cable to the amplifier. The signal is then boosted and sent to the inside antenna. Your cell phone or data card then communicates with the improved signal. When the cell phone or data card transmits, the signal goes through the inside antenna or is boosted by the amplifier and broadcast back to the cell tower through the outside antenna. More Features: * Passes TIA/EIA-98-E Transmit test for evaluation CDMA Cellular Phones * Power Control Logic ensures maximum output power is within Cellular Standards * Allows cellular phone to operate properly with all types of modulations including CDMA * Maximum 3 Watts output power * Designed for all cellular systems: AMPS, CDMA, EDGE, GPRS, GSM and TDMA * Automatic Gain Control * Overload Protection Circuit - Protects cell system from overload * Automatic Reset - if overload occurs * FCC Type Accepted *DC power supply included - AC power supply sold separately *Slim low profile inside antenna included in the retail box (301127) Minimize

The Dual Band Cellular Glass Mount High-Gain Antenna comes ... Read more

The Dual Band Cellular Glass Mount High-Gain Antenna comes with 14' Coax, works on th 806-894 MHz / 1850-1990 MHz is a 50 ohm Antenna with FME Female Connector, Glass Mounting with 3-M Adhesive, is 15-Inch high, with a Stainless Steel Whip and has a built in ground plane with 3.5 dBi 806-894 MHz and 4.8 dBi 1850-1990 MHz Antenna Gain. Call our fully staffed Tech Department for questions or help at 866-294-1660. Minimize

The Wilson Dual-Band Cellular Antenna is the most advanced ... Read more

The Wilson Dual-Band Cellular Antenna is the most advanced cellular antenna of its kind. Few things are as frustrating or dangerous as trying to reconnect a dropped call while driving. The Mini Glass Mount Antenna dramatically reduces or completely eliminates cellphone disconnections and noise. Inside of an automobile a phone with the Mini Glass Mount Antenna can transmit and receive over ten times the signal of a phone without one. Minimize

Brand New Wilson Cellular Dual-Band Mini Glass Mount Cell P ... Read more

Brand New Wilson Cellular Dual-Band Mini Glass Mount Cell Phone Antenna . Model # 301114. The Wilson mini-glass-mount cellular antenna's main benefits over our other dual-band antennas are its low profile design and the ability to pass its signal through single-pane glass. This allows for very clean looking permanent installations in which the cable is hidden. Be aware however that its compact size does limit performance when compared to our full size glass mount cellular antenna.. *When used without a repeater, or amplifier a phone adapter for your specific phone is required. . Dual band/Tri-mode mini glass mount antenna; Includes:. 14' RG58/U cable FME female connector; Features:. Dual-Band & Tri-Mode: 800MHz & 1900MHz Analog and Digital Compatible with all Cellular, PCS and iDEN providers Low profile Includes all mounting hardware Permanent installation Includes 3M adhesive for mounting to single pane glass Built-in ground plane Over 10 times more signal than a cell phone used inside vehicle without an external antenna . Patented ; Specifications:. Frequency 806-894/1850-1990 Gain (dBd) Cell/PCS Unity/Unity Maximum Power (Watts) 10 Whip Length 5.375 Whip Material Plastic Coated Steel Wire Color Black Mount Type Glass mount Cable Length 14' Cable Type RG58/U Connector FME Female, installed ; Compatible With:. The Wilson mini-glass-mount antenna works with all North American cellular providers.; Minimize

Wilson Cellular Dual-Band Magnetic Mount Cell Phone Antenna ... Read more

Wilson Cellular Dual-Band Magnetic Mount Cell Phone Antenna . Model # 301125. The Wilson Cellular Magnetic Mount antenna is our best selling Wilson Electronics antenna. This antenna is recommended for use on cars, trucks and boats. It must be mounted on a metal surface (minimum 8" diameter) to function properly and is not recommended for home use.. Required:. *Phone Adapter Cable: All Wilson Cellular Antennas require a phone adapter cable in order to connect to your cell phone *Metal ground plane required (minimum 8" diameter); Includes:. Magnet mount antenna 10' RG174 cable SMA, Male installed ; Features:. Dual-Band & Tri-Mode: 800MHz & 1900MHz Analog and Digital Easy to install Removable - easily transfers from one vehicle to another 10 to 15 times more signal than a cell phone used inside vehicle without an external antenna Strong rare earth magnet; Specifications:. Frequency Range 806-894 MHz / 1850-1990 MHz Impedance 50 ohms Antenna Gain 5.12 dBi 806-894MHz / 6.12 dBi 1850-1990 MHz Radiation Omni Polarization Vertical Wavelength 0.9 Wavelength 806-894 MHz / 2.0 Wavelength 1850-1990 MHz Ground Plane Metal ground plane required Connector SMA Male Material Whip - Stainless Steel Coax Cable RG174 - 10 feet / 3.05 meters Height 12.25 inches / 31.12 cm Mount Rare earth magnet ; Compatible With:. All Cellular, PCS and iDEN providers; Minimize

Great cell phone antenna (301113) for situations with minim ... Read more

Great cell phone antenna (301113) for situations with minimal clearance. Works great on passenger cars and trucks. Compatible with all generations of CDMA, GSM and TDMA including GSM, GPRS, EDGE, UMTS, HSDPA, CDMA, 1xRTT, EVDO, TDMA, AMPS, iDEN, Nextel Features: * Dual-Band & Tri-Mode: 800MHz & 1900MHz Analog and Digital * Compatible with all Cellular, PCS and iDEN providers * Great for travellers * Metal ground plane required (minimum 8" diameter) * 10 times more signal than a cell phone used inside vehicle without an external antenna The Wilson Mini Magnet Mount Cellular Antenna works great on metal surfaces that are free from obstacles which could cause signal interference. Its main benefits over our other dual-band antennas are its ease of installation, the ability to quickly move it from place to place and its compact size. This is especially useful for those who travel or have multiple vehicles needing an antennaThis antenna is recommended for use on cars, trucks and boats. All Wilson Cellular Antennas require a phone adapter cable in order to connect to your cell phone (sold separately) Minimize

Wilson Replacement Glass Remount Kit Model # 991115 This is ... Read more

Wilson Replacement Glass Remount Kit Model # 991115 This is a Wilson Electronics Replacement doublestick tape and alcohol pads used when re-mounting one of the following antennas: Wilson Cellular Dual-Band Glass Mount Antenna, Wilson Cellular Dual-Band Mini Glass Mount Antenna and Wilson Cellular Glass Mount Antenna for Nextel/iDEN Includes: alcohol pad 3M double sided tape (Adhesive strips for inside and outside) Compatible With: Glass Mount Antenna (301102) or Mini Glass Mount Antenna (301114) Minimize