> cat accessories

Extension Accessory - Flexible Duct 10ft x 6 in with Connec ... Read more

Extension Accessory - Flexible Duct 10ft x 6 in with Connecting Sleeve and Clamp - Used to Extend 300DA and 300IA Accessories in 10ft Increments - Accessory for Power Cat A300 Minimize

Cat5E 110 Type Patch Panel 24 Rackmount 102203 * UL approve ... Read more

Cat5E 110 Type Patch Panel 24 Rackmount 102203 * UL approved * 19 inch 1U rackmount * Meets TIA/EIA-568B.2/568B.2-1 Cat.5E ISO/IEC 11801 and EN 50173-1 specification * Support T568A B wiring * Wire diameter : 22 ~ 26AWG * Insulation diameter range : 0.70 to 1.40mm * Jack contacts : Phosphor bronze, 50micron gold plate over nickel plating.* IDC contacts : Phosphor bronze, 50micron gold plate over nickel plating.* Safty : UL1863 * Flamability : UL 94 VO * Operating temperature : -40 to +70 dgree Minimize

Florida Hydraulic Industrial Model 310 The CAT Pump 310 has ... Read more

Florida Hydraulic Industrial Model 310 The CAT Pump 310 has a Triplex design offers high efficiency and low pulsation. Durable high pressure seals are lubricated and cooled by pumped liquid. Pre-set Lo-Pressure Seals provide secondary protection against external leaks and require no packing adjustment. Optional STHT, FPM and EPDM elastomers for compatibility with many liquids and temperaturesup to 200°F Alternate crankshaft strokes on the CAT Pump 310 offers flexibility with belt, clutch or direct-drive installation. Features Flow ......................................................................4.0 gpm (15 l/m) Pressure Range....................................100 to 2200 psi (7 to 155 bar) RPM .....................................................................950 rpm (950 rpm) Inlet Pressure Range.................................5 to 60 psi (0.35 to 4 bar) Stroke .......................................................................0.709 (18 mm) Bore................................................ Minimize

Use the FCA100 to install a surge protector with your flat ... Read more

Use the FCA100 to install a surge protector with your flat panel TV. Minimize

Borla Cat-Back exhausts feature patented, straight-through ... Read more

Borla Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. It's increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive Borla sound of power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give the absolute performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power. The precision computer-controlled CNC manufacturing ensures an accurate fit. Borla stands behind every system with a Million-Mile warranty. Minimize

€Cat6 110 Type Patch Panel 48 Port Rackmount € 102209 * UL ... Read more

€Cat6 110 Type Patch Panel 48 Port Rackmount € 102209 * UL approved * 19 inch 1U rackmount * Meets TIA/EIA-568B.2/568B.2-1 Cat.6 ISO/IEC 11801 and EN 50173-1 specification * Support T568A B wiring * Wire diameter : 22 ~ 26AWG * Insulation diameter range : 0.70 to 1.40mm * Jack contacts : Phosphor bronze, 50micron gold plate over nickel plating.* IDC contacts : Phosphor bronze, 50micron gold plate over nickel plating.* Safty : UL1863 * Flamability : UL 94 VO * Operating temperature : -40 to +7 Minimize

Borla Cat-Back exhausts feature patented, straight-through ... Read more

Borla Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive Borla sound of power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, Borla stands behind every system with a million-mile warranty. This exhaust has a piping diameter of 2.5 inches and a split rear exit. It also features a single round rolled angle cut lined tip of size 5 inches round x 8.75 inches. Minimize

TS Performance MP-8 Module for the 97-2000 Cat 3126 Engine ... Read more

TS Performance MP-8 Module for the 97-2000 Cat 3126 Engine Gain up to 30%! Easy Installation - Plug & Play 1-3 mpg increase In Cab adjustable - 3 Positions! Stock 15% 30%. Undetectable - Does not leave a fingerprint in the factory computer. Step into the future with TS Performance’s new Power Play MP-8 diesel performance module. The TS MP- 8 is a universal performance module that holds eight brand specific programs. TS Performance now offers turbo diesel owners the last programmer they will ever need. The MP-8 is the company’s newest innovation that is compatible with Ford Powerstroke GM Duramax and Dodge Cummins turbo diesel engines. The MP-8 holds eight brand specific programs that delivers improved horsepower torque and fuel economy from one plug-and-play module. When the MP-8 is plugged into your truck’s computer it automatically selects the appropriate programming and provides your truck with a selection of performance levels from a dash mounted knob. The MP-8 is also compatible with any performance programmer or downloader already installed into your truck’s computer. Furthermore the MP-8 can never be outdated as it can be easily upgraded with new TS Performance programs that become available. If you ever decide to sell your truck or turn it back in at the end of your lease you can simply purchase the appropriate TS-Performance harness for your new make and model vehicle plug in the MP-8 and start enjoying up to 100+ horsepower and up to 200 lbs.-ft. of torque. The TS Performance MP-8 is currently available for Ford Dodge Chevy International Jeep Liberty Caterpillar John Deere & Case diesel engines. Minimize

RV - Edge Module for CAT 3126 B&E motors... KEY FEATURES? F ... Read more

RV - Edge Module for CAT 3126 B&E motors... KEY FEATURES? Four Power Levels with 40 additional HP? Excellent Throttle Response? Helps Eliminate Downshifting while Towing? Increases Fuel Economy? Quick and Easy InstallationEdge has seen an increase in fuel economy ranging from 0.5 to 1.0 MPG depending on driving... Minimize

Ghost & Cat Tabletop Decoration. With a jack-o'-lantern in ... Read more

Ghost & Cat Tabletop Decoration. With a jack-o'-lantern in hand and a black cat playing peek-a-boo, this resin ghost is ready for trick-or-treating. A fun addition to your Halloween decorations, he'd look adorable accenting a group of pumpkins or haunting a tabletop or mantel. Be sure to add him to your Halloween collection. 8H x 5 1/4W. Exclusive. Details: Halloween, Ghosts Minimize

Borla Cat-Back exhausts feature patented, straight-through ... Read more

Borla Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive Borla sound of power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, Borla stands behind every system with a million-mile warranty. This exhaust has a piping diameter of 2.25 inches and a rear exit. It also features a dual round rolled angle cut style tip of size 3.14 inches round x 4.63 inches . Minimize

Manufacturer: Zimmer Trauma System Model: NA Cat # 47-1162- ... Read more

Manufacturer: Zimmer Trauma System Model: NA Cat # 47-1162-24 Mfg date: NA Use By date: NA Made in USA Description: 1 3/4 mm, 44mm Length Stainless steel Sterile Qty:01/box Stocks ID: 2043 Minimize

Performance Exhaust Systems by Bassani Xhaust. Bassani Aft- ... Read more

Performance Exhaust Systems by Bassani Xhaust. Bassani Aft-Cat Exhaust System Features - The Bassani Aft-Cat Exhaust System is custom-made for your specific year, make and model. Precise mandrel-bending and careful pipe diameter selection create free-flowing power, enhanced sound and smooth style. Expert engineering ensures an unsurpassed fit every time. Bassani cat-back exhaust comes in one of three sound levels:. Bassani Exhaust Systems are available in composite aluminized steel or stainless steel pipes. Bassani Aft-Cat Exhaust System, Cat-Back. For the top selection of Bassani Xhaust Exhaust, Mufflers & Tips shop online today. The Bassani Aft-Cat Exhaust System, Cat-Back will improve and personalize your vehicle. Performance Exhaust Systems by Bassani Xhaust - selected by many auto enthusiasts in the top automotive discussion forums. Bassani Aft-Cat Exhaust System for your vehicle will deliver the results you are looking for! Bassani Aft-Cat Exhaust System - Exhaust, Mufflers & Tips - Performance Exhaust Systems. Minimize

Borla Cat-Back Headers are engineered to provide excellent ... Read more

Borla Cat-Back Headers are engineered to provide excellent exhaust emission and internal power generation. These headers feature a multi-core technology and are manufactured from austenitic stainless steel which offers long lasting durability. They are equipped with ultra-smooth mandrel bends ensuring maximum flow and power. These headers provide brilliant fuel economy and increase horsepower efficiently. They are corrosion resistant and ensure easy installation. Minimize

25,000 RPM BALANCED End Mill Holders I.D bore tolerance is ... Read more

25,000 RPM BALANCED End Mill Holders I.D bore tolerance is H5 (Best in industry) Balanced to 12,500 RPM to save spindle bearing life Lab certified for bore and taper tolerance Collet Chucks Balanced to 25,000 RPM at G2.5 T.I.R 0.0001" or better from taper to collet pocket Taper ground to AT3 accuracy or better Each holder lab certified for accuracy and balance 1 Pc. Techniks brand new CAT 40 1/2" (13 mm) Precision Intergrated Drill Chuck 3 times the holding power than ordinary drill chuck. Avoid chuck falling off. Twice as accurate as ordinary chuck. Integrated design. Replaceable drill chuck. Technical Specification: Part No. CAT 40 SPU 1/2" ER-8, ER-11, ER-16, ER-20, ER-25, ER-32, ER-40 & ER-50 TG-75, TG-100 & TG-150 Minimize