> Building Supplies > Tool Accessories

Door with flexible vinyl hinges helps stop drafts. Vertical ... Read more

Door with flexible vinyl hinges helps stop drafts. Vertically embossed surface is embedded with specially blended PVC particles that become a permanent part of the durable, maintenance-free finish. Cut with only a saw. May be installed as a double door, using two single doors. Fully assembled, includes magnetic catch, 36" track with lubricant pack, necessary hardware, and easy-to-follow instructions. Fits all door openings from 32" to 36". Minimize

Omron A165K-A3MC-2 Key Type Selector and Switch, Solder Ter ... Read more

Omron A165K-A3MC-2 Key Type Selector and Switch, Solder Terminal, IP65 Oil Resistant, 16mm Mounting Aperture, 3 Notches, Manual Reset Method, Center Key Release Postion, Square, Double Pole Double Throw Contacts Minimize

The Norton A290 No-Fil vacuum abrasive disc is coated with ... Read more

The Norton A290 No-Fil vacuum abrasive disc is coated with No-Fil stearate for more durability over an uncoated abrasive while resisting chip loading. This disc is a good choice for soldered and welded areas, as well as all other dry metal finishing operations. Coated abrasives have individual abrasive grains spaced at a predetermined distance from one another. This is an open-coat disc. An open coat covers 50 to 70 percent of the surface with abrasive grains, for greater flexibility and clog resistance than a closed coat, which covers 100 percent of the surface. An open coat allows for longer usage time because it clogs less, while a closed coat offers a finer surface finish than an equivalent open-coat abrasive. The paper backing is flexible, and offers a more consistent finish than a cloth or fiber backing, while being thicker and more durable than a polyester film backing. Pressure sensitive adhesive sticks when pressure is applied, without messing with solvents, water, or heat. Stearated abrasives are non-pigmented to eliminate color transfer to the work surface. Vacuum discs attach to a vacuum system that clears chips and dust away from the workpiece and sander operator without interruption. This disc is suitable for use with a die grinder or orbital sander. Use with molded rubber back-up pads on a grinder, using a hard pad for aggressive cutting, a medium pad for general purpose applications, or a soft pad for contours and fine finishing work. Or, with a random orbital sander, use a foam back-up pad to match the application. Foam pads come in different combinations of shape and density for finer or more aggressive work. For example, use a low profile for uniform contact with the work surface, a tapered edge for small contours or inside corners, soft density for 320 grit and finer sanding, and medium density for grits coarser than 320. This six-inch diameter disc has six vacuum holes. Ensure that the holes on the disc are lined up with the holes on the backing pad, in order to properly draw the debris and dust away from the workpiece. Aluminum oxide is a widely used and versatile abrasive material. It is a tough, fracture- and wear-resistant grit that works well with a broad range of materials, from metals to wood. Aluminum oxide is more durable than silicon carbide and often used for material removal and finishing. P-graded abrasive grains are held to a closer tolerance than non-P-graded abrasives, which means that they offer a more consistent surface finish. Abrasives are used for a variety of applications from shaping a part to fine finishing, depending on the grit size. Low grit numbers like 40 are coarse and are used for removing excess material and shaping a part. High grit numbers like 400 are fine and help to create a smooth surface finish. Norton Abrasives manufactures a wide variety of sanding, grinding, and polishing abrasives, and has been located in the United States since 1885. In 1990, Saint-Gobain purchased Norton, keeping its manufacturing facilities and offices in the same location. Norton/Saint-Gobain has been recognized as a Global 100 Sustainable Company, as well as earning ISO 9000 and 14001 certification for quality and environmental management standards. Minimize

Polyetherimide (PEI) is an amorphous, amber-to-transparent ... Read more

Polyetherimide (PEI) is an amorphous, amber-to-transparent thermoplastic with similar characteristics to PEEK's. Relative to PEEK, it is cheaper, but less temperature-resistant, and lower in impact strength. It is prone to stress cracking in chlorinated solvents. It is available under the tradename Ultem, a registered trademark of General Electric, the principal developer and manufacturer. PEI will withstand continuous temperature of 390 F under load and is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors. It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents. PEI has found use in the Medical Device Market because of its heat and radiation resistance, hydrolytic stability, and transparency. In the electronics field it is used in lamp sockets, and printed circuit board substrates. Minimize

Omron A165K-A2M-2 Key Type Selector and Switch, Solder Term ... Read more

Omron A165K-A2M-2 Key Type Selector and Switch, Solder Terminal, IP65 Oil Resistant, 16mm Mounting Aperture, 2 Notches, Manual Reset Method, Left and Right Key Release Postion, Square,Double Pole Double Throw Contacts Minimize

B & C Eagle, 10,000 Count, 2' Length, 1/2' Medium Crown, 16 ... Read more

B & C Eagle, 10,000 Count, 2' Length, 1/2' Medium Crown, 16 Gauge, Galvanized Sheathing Staples That Fit The Bostitch Models 438S4, 650S4, T40S4, T55S4, T50S4, T38, T36-1. Minimize

The Alvord Polk 827-0 right-hand spiral CNC length chucking ... Read more

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms with reduced vibration and increased accuracy compared to a longer tool. Less vibration means more precision. Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. For reamers in the 827-0 series with 0.0280 to 0.1910 inches diameter there are four flutes, and for 0.1915 to 0.5010 there are six flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 827-0 series. Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads. Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881. Minimize

Dowel Pins also referred to as Parallel Pins, are commonly ... Read more

Dowel Pins also referred to as Parallel Pins, are commonly used to retain parts in a fixed position or to preserve alignment. Accurately ground to plus 0.0002, minus 0.0000 of the stated diameter and + or -0.010 of the length, they are chamfered at both ends for easy insertion. A selection of sizes and lengths is a useful addition to the well-equipped shop or laboratory. Type 316 Stainless Steel are the most corrosion resistant dowel pins. May be mildly magnetic. Minimize

This fitting is made with an easy one-touch, low force, pus ... Read more

This fitting is made with an easy one-touch, low force, push-to-connect fitting design from SMC, the world leader in pneumatic product design. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the circular release ring on the fitting, and you can easily pull the tube out. The compact design of this fitting allows easy installation in confined spaces. The swivel capability lets you re-position for the best access. Excellent quality including Buna-N o-rings and factory applied sealant ensure an air tight installation. Release collar allows easy removal of tubing without damaging the tube. Built-in sealant helps prevent leaks, and saves time, making installation easier. Can be used in both positive pressure and vacuum pressure environments from -15 (vacuum) to 150 psi. Stud allows rotation of the body for ease of installation in confined spaces. Can be used with air or water. Minimize

This fitting is made with an easy one-touch, low force, pus ... Read more

This fitting is made with an easy one-touch, low force, push-to-connect fitting design from SMC, the world leader in pneumatic product design. Simple installation--push the tubing in, and the connection is complete. To release the tubing, press the circular release ring on the fitting, and you can easily pull the tube out. The compact design of this fitting allows easy installation in confined spaces. The swivel capability lets you re-position for the best access. Excellent quality including Buna-N o-rings and factory applied sealant ensure an air tight installation. Release collar allows easy removal of tubing without damaging the tube. Built-in sealant helps prevent leaks, and saves time, making installation easier. Can be used in both positive pressure and vacuum pressure environments from -15 (vacuum) to 150 psi. Stud allows rotation of the body for ease of installation in confined spaces. Can be used with air or water. Minimize

Most often used on machine screws and threaded rod, these g ... Read more

Most often used on machine screws and threaded rod, these general purpose nuts are for low-strength assemblies. Hex Nuts have flat tops with chamfered corners; bottoms may be flat or chamfered. Hex drive systems are driven with a wrench.Polyvinylchloride, or PVC, exhibits little or no water absorption, absorbing 0.05% of its weight after 24 hours of exposure to water. Because it is chlorinated, PVC also possesses natural flame retardant qualities. PVC has one of the highest dielectric strengths of plastics, at 1413 volts per millimeter, making it an excellent insulator. PVC possesses average to above average strength compared to other plastics, with a tensile strength of 7450 psi (pounds per square inch) and an impact strength of 5 force pounds (Izod Impact Scale). The primary drawback of PVC is its low melting point temperature of 140 degrees Fahrenheit.A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings. Minimize

C110 - This 99.9 percent commercially pure Copper can be be ... Read more

C110 - This 99.9 percent commercially pure Copper can be bent, riveted, drilled, soldered, brazed and welded to most any design requirement. Commonly used for electrical connections and ground straps. Minimize

Omron A165K-J2M-2 Key Type Selector and Switch, Solder Term ... Read more

Omron A165K-J2M-2 Key Type Selector and Switch, Solder Terminal, IP65 Oil Resistant, 16mm Mounting Aperture, 2 Notches, Manual Reset Method, Left and Right Key Release Postion, Rectangular,Double Pole Double Throw Contacts Minimize

5/8" Leg 80 Series Staples and 1" Diameter Caps 110 count C ... Read more

5/8" Leg 80 Series Staples and 1" Diameter Caps 110 count Cap and Staple Strips for Efficient Reloading Ideal for Attaching House Wrap, Roof Felts and Membranes and Vapor Barriers Standard tensile steel meets or exceeds Uniform Building Code requirements 2,200 Caps and Staples per carton, Manufacturer: Grip-Rite Minimize

Polyetherimide (PEI) is an amorphous, amber-to-transparent ... Read more

Polyetherimide (PEI) is an amorphous, amber-to-transparent thermoplastic with similar characteristics to PEEK's. Relative to PEEK, it is cheaper, but less temperature-resistant, and lower in impact strength. It is prone to stress cracking in chlorinated solvents. It is available under the tradename Ultem, a registered trademark of General Electric, the principal developer and manufacturer. PEI will withstand continuous temperature of 390 F under load and is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors. It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents. PEI has found use in the Medical Device Market because of its heat and radiation resistance, hydrolytic stability, and transparency. In the electronics field it is used in lamp sockets, and printed circuit board substrates. Minimize

C110 - This 99.9 percent commercially pure Copper can be be ... Read more

C110 - This 99.9 percent commercially pure Copper can be bent, riveted, drilled, soldered, brazed and welded to most any design requirement. Commonly used for electrical connections and ground straps. Minimize

Threaded Rods and Studs are intended for situations when fa ... Read more

Threaded Rods and Studs are intended for situations when fast assembly and disassembly are required. Studs are generally shorter in length than Threaded Rods. Brass is rust proof, corrosion resistant and polishes to a rich, golden color. Brass is easily soldered and brazed and accepts plating readily. The typical composition is 70% Copper and 30% Zinc. Strength increases with a higher percentage of Zinc.A threaded fastener's size name includes information about the major external diameter, followed by the threads per inch, which indicates if it is coarse or fine. Coarse threads are better when working with brittle materials; they are sturdier and are easier to thread and unthread compared to fine. Coarse threading also allows for thicker coatings and platings. Minimize

Dowel Pins also referred to as Parallel Pins, are commonly ... Read more

Dowel Pins also referred to as Parallel Pins, are commonly used to retain parts in a fixed position or to preserve alignment. Accurately ground to plus 0.0002, minus 0.0000 of the stated diameter and + or -0.010 of the length, they are chamfered at both ends for easy insertion. A selection of sizes and lengths is a useful addition to the well-equipped shop or laboratory. Type 316 Stainless Steel are the most corrosion resistant dowel pins. May be mildly magnetic. Minimize

Omron A165L-JAA-5D-2 Two Way Guard Type Push Button and Swi ... Read more

Omron A165L-JAA-5D-2 Two Way Guard Type Push Button and Switch, Solder Terminal, IP65 Oil-Resistant, 16mm Mounting Aperture, LED Lighted, Alternate Operation, Rectangular, Blue, 5 VDC Rated Voltage, Double Pole Double Throw Contacts Minimize

All of Voltec's light strings have pre-assembled cages whic ... Read more

All of Voltec's light strings have pre-assembled cages which saves you time, as well as the cost of installation Sockets are spaced every 10 feet and are the perfect solution to your temporary lighting needs such as construction sites & parking lots UL listed and it carries the UL approval for Canada as well. Jacket resists the harmful effects of abrasions, moisture and sunlight Flexible jacket allows you to utilize cord in temperatures ranging from -58?F to 221?F, Manufacturer: Voltec Minimize

The Alvord Polk 827-0 right-hand spiral CNC length chucking ... Read more

The Alvord Polk 827-0 right-hand spiral CNC length chucking reamer is a round shank tool made of tungsten carbide, and is most commonly chosen for reaming abrasive materials such as cast iron. This tool is meant for use in a CNC machine at high rpms with reduced vibration and increased accuracy compared to a longer tool. Less vibration means more precision. Straight flute reamers are useful for uninterrupted cuts in general purpose applications. These reamers make small, circular, and precise enlargements to through and blind holes. For reamers in the 827-0 series with 0.0280 to 0.1910 inches diameter there are four flutes, and for 0.1915 to 0.5010 there are six flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 827-0 series. Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads. Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881. Minimize

Brass Shim Stock - Type C260, Half Hard, Cold Rolled. This ... Read more

Brass Shim Stock - Type C260, Half Hard, Cold Rolled. This material takes hard or soft solder readily, has excellent forming qualities and may be lightly drawn, blanked or stamped. 6 inch x 18 inch single sheets. No. 2 Finish. Minimize

The Alvord Polk 127-1 right-hand spiral chucking reamer (al ... Read more

The Alvord Polk 127-1 right-hand spiral chucking reamer (also called a machine reamer) is a general purpose round shank tool made of high-speed steel with no finish or coating, and is most commonly chosen for reaming interrupted cuts. This tool can be used in a drill press, screw machine, lathe, or other good-quality toolholder. Right-hand spiral reamers are useful for interrupted cuts and in blind holes. Spiral reamers prevent whole flute contact with the leading edge in an interrupted cut, as in a keyway. This prevents damage to the interruption and the reamer flute. Right-hand spiral style tools also pull chips away from the tip of the tool, instead of driving chips in front of the tool. Right-hand spiral reamers are also useful when reaming blind holes, since pulling chips out of the hole prevents clogging, which may cause tool damage. For reamers in the 127-1 series with 0.0280 – 0.1561 inches diameter there are four flutes, for 0.1562 – 0.5220 inches diameter there are six flutes, for 0.5221 – 0.8820 inches diameter there are eight flutes, for 0.8821 – 1.1950 inches diameter there are 10 flutes, and for 1.1951 – 1.5000 inches diameter, there are 12 flutes. Tolerances are +0.0002 -0.0000 inches for all reamers in the 127-1 series except for those that are dowel-pin sized, in which case tolerances are +0.0000 -0.0002 inches. Reamers are used to finish existing holes. When holes are created using common applications like drilling or punching they often have minute imperfections. Their roundness may be flawed, or their diameter may be slightly smaller than required. Reamers are made to exacting tolerances, so they can correct such errors and create precisely round holes of exacting dimensions. Reaming is often used before tapping screw threads. Reaming is often used before tapping screw threads. Alvord Polk manufactures a broad family of cutting tools, brushes, and tooling components, following ISO 9001 standards for quality and environmental impact of their products. Their offices and manufacturing facilities have been located in the United States since 1881. Minimize

Dowel Pins also referred to as Parallel Pins, are commonly ... Read more

Dowel Pins also referred to as Parallel Pins, are commonly used to retain parts in a fixed position or to preserve alignment. Accurately ground to plus 0.0002, minus 0.0000 of the stated diameter and + or -0.010 of the length, they are chamfered at both ends for easy insertion. A selection of sizes and lengths is a useful addition to the well-equipped shop or laboratory. Type 316 Stainless Steel are the most corrosion resistant dowel pins. May be mildly magnetic. Minimize

Dowel Pins also referred to as Parallel Pins, are commonly ... Read more

Dowel Pins also referred to as Parallel Pins, are commonly used to retain parts in a fixed position or to preserve alignment. Accurately ground to plus 0.0002, minus 0.0000 of the stated diameter and + or -0.010 of the length, they are chamfered at both ends for easy insertion. A selection of sizes and lengths is a useful addition to the well-equipped shop or laboratory. Type 316 Stainless Steel are the most corrosion resistant dowel pins. May be mildly magnetic. Minimize

Omron A165K-A2AL-1 Key Type Selector and Switch, Solder Ter ... Read more

Omron A165K-A2AL-1 Key Type Selector and Switch, Solder Terminal, IP65 Oil Resistant, 16mm Mounting Aperture, 2 Notches, Automatic Reset Method, Left Key Release Postion, Square, Single Pole Double Throw Contacts Minimize

Glass Filled Ultem 1000 (PEI) is an amorphous thermoplastic ... Read more

Glass Filled Ultem 1000 (PEI) is an amorphous thermoplastic with similar characteristics to PEEK's. Relative to PEEK, it is cheaper, but less temperature-resistant, and lower in impact strength. Glass filled PEI is higher strength than the unfilled version. It is prone to stress cracking in chlorinated solvents. It is available under the tradename Ultem, a registered trademark of General Electric, the principal developer and manufacturer. PEI will withstand continuous temperature of 390 F under load and is rated UL 94 VO and is generally accepted by the FAA for aircraft interiors. It is soluble in partially halogenated solvents but resistant to alcohols, acids and hydrocarbon solvents. PEI has found use in the Medical Device Market because of its heat and radiation resistance, hydrolytic stability, and transparency. In the electronics field it is used in lamp sockets, and printed circuit board substrates. Minimize