|
|
All Medeco cylinders are constructed of durable machined br
... Read more
All Medeco cylinders are constructed of durable machined brass components, designed to last the life of your equipment. Hardened stainless steel inserts inside the cylinder provide the ultimate defense against drilling and other forms of physical attack. Unique elevating and rotating tumbler pin system is virtually pick proof. Key Retaining - key is removable in the locked position only. Available Lengths: 5/8", 7/8", 1-1/8" & 1-1/2" Available Keying: KD - Keyed Different Commercial Keyway give end users flexibility for obtaining extra keys by allowing key duplication at a wide variety of professional outlets including authorized locksmiths. Contains 2 keys plus 2 flat cams, 2 offset cams, all necessary stop washers, nuts & a spare washer Finishes: 26 brushed chrome finish standard.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Patented locking system makes cylinder virtually pick resis
... Read more
Patented locking system makes cylinder virtually pick resistant Hardened steel inserts resist drilling Patented keys allows you to control key duplication Double pole, double throw switch is standard Five pin cylinder is standard Double ???D??? Mounting Maintained or Momentary Contact Contact is rated for 2 Amps at 250 VAC or 4 Amps at 125 VAC Contacts are silver plated copper Switch is UL Registered, CSA Certified Two keys per lock Keyed Different Only Finish: 26 Satin chrome finish standard
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The M490 locks have automatic voltage sensing for 12 and 24
... Read more
The M490 locks have automatic voltage sensing for 12 and 24 volts along with polarity protection to make wiring less complex Bayonet mount makes installation simpler by not requiring magnet to be held overhead while mounting screws are installed New design allows for RH/LH configuration in the field Armature mount allows armature to pivot compensating for slight opening imperfections 1500 lb. Hold Force Kits are available for top jam, double door, and glass door applications The M490 is tested and certified to meet or exceed UL1034 and BHMA 1500lb. hold force requirements. Satin Aluminum 628 Finish
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Direct Dial: No need to clear before entering combination.
... Read more
Direct Dial: No need to clear before entering combination. Once you stop turning the dial, the power will shut down after 40 seconds. Dead Zones: None Memory: Non-volatile LCD: Limited View Liquid Crystal Display with indicator arrows makes dialing easy and exact. Combination Changes: LCD indicators in change key mode. Combination changed with correct combination or serial number. Random Number View: True Scramble Daylocking: No Back Dialing: No Lock Reset: Automatic when bolt is thrown or 40 seconds after turning has stopped. Manipulation: Fail secure against high-voltage attack, robot attack, X-ray methods, magnetic, vibration, and R/F. Wrong Try Penalty: 10-14 errors results in a 3 minute time out. 15 errors or greater results in a 4 minute time out. Both error count and penalty time resets with valid combination. Back Cover: Lock on back cover pin prevents removing the back cover without the combination. Case: 2 piece case cover (cover & box), solid cast zin
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The M490P locks have automatic voltage sensing for 12 and 2
... Read more
The M490P locks have automatic voltage sensing for 12 and 24 volts along with polarity protection to make wiring less complex Bayonet mount makes installation simpler by not requiring magnet to be held overhead while mounting screws are installed New design allows for RH/LH configuration in the field Armature mount allows armature to pivot compensating for slight opening imperfections 1500 lb. Hold Force Magnetic Bond Sensor (MBS) monitors the strength of the bond between the lock and armature so you know the door is secure Door Position Switch (DPS) monitors whether the door is open or closed Relock Time Delay (RTD) provides a relock delay that is adjustable from 0.5 to 30 seconds Kits are available for top jam, double door, and glass door applications The M490 is tested and certified to meet or exceed UL1034 and BHMA 1500lb. hold force requirements Satin Aluminum 628 Finish
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
|
|
from $7.38
(3 stores)
See Details
|
|
|
Innovative Turn Lock feature allows you to lock & leave wit
... Read more
Innovative Turn Lock feature allows you to lock & leave without a key Provides additional layers of keyless security & safety inside your home or office Ideal for front doors, side & back doors, garage entry doors, etc. Easily replace most exisiting locks with a screwdriver in about 30 minutes No programming required; preset with two user codes so it's ready to use right out of the box Easy installation, no need to run wires Finishes: Bright Brass 605, Antique Brass 609, Oil-Rubbed Bronze 613, Satin Nickel 619, Bright Chrome 625 and Satin Chrome 626
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
High-Rise Security and Fire Life Safety, Third Edition, is
... Read more
High-Rise Security and Fire Life Safety, Third Edition, is a comprehensive reference for managing security and fire life safety operations within high-rise buildings. It spells out the unique characteristics of skyscrapers from a security and fire life safety perspective, details the type of security and life safety systems commonly found in them, outlines how to conduct risk assessments, and explains security policies and procedures designed to protect life and property. Craighead also provides guidelines for managing security and life safety functions, including the development of response plans for building emergencies. This latest edition clearly separates out the different types of skyscrapers, from office buildings to hotels to condominiums to mixed-use buildings, and explains how different patterns of use and types of tenancy impact building security and life safety.New to this edition: Differentiates security and fire life safety issues specific to: Office towers Hotels Residential and apartment buildings Mixed-use buildings Updated fire and life safety standards and guidelinesIncludes a CD-ROM with electronic versions of sample survey checklists, a sample building emergency management plan, and other security and fire life safety resources.
Minimize
Get free shipping on orders over $25!
In stock
|
|
FREE Shipping
Go To Store
|
|
|
Stainless Steel Faceplate Frame Type - Hollow Metal, Alum
... Read more
Stainless Steel Faceplate Frame Type - Hollow Metal, Aluminum or Wood Corrosion - Resistant case and moving parts. Tamper Strength Test - 1700 lbs (765kg) Cycle Test 500,000 cycles Keeper Depth - 5/8??? Maximum Latch Projection Possible with 1/8??? Door/Frame Clearance - 3/4??? Strike Depth 1.50??? Overall Reversible - Non Handed. (w/o deadbolt) Fully Tamper Proof Horizontal Adjustment To compensate for misalignment and warpage. 1-1/2" Jamb Modification Finishes: Brass US3, Oil Rubbed Bronze US10B and Stainless Steel US32D
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Patented Quick Reversible feature enables reversal of hands
... Read more
Patented Quick Reversible feature enables reversal of hands without disassembling the lock case (Patent # 6,349,982) Security trims provide a vandal-resistant barrier Can be used with new or existing Corbin Russwin key systems, including patented high-security Pyramid cylinders. (Patent # 6,125,674) Also accepts cylinders of most other manufacturers. Provides life safety and security in a single door prep, saving the additional cost of a deadlock Through-bolted trim designs for proper alignment and increased security Finishes: BHMA 605 (US3) Bright Brass, BHMA 606 (US4) Satin Brass, BHMA 612 (US10) Satin Bronze, BHMA 613 (US10B) Oxidized Bronze, oil rubbed, BHMA 625 (US26) Bright Chromium Plated, BHMA 626 (US26D) Satin Chromium Plated and BHMA 630 (US32D) Satin Stainless Steel. Includes lockcase, knob or escutcheon trim package, armored front, strike and screw pack.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Standard 4210 series closer shipped with EXTRA DUTY arm (no
... Read more
Standard 4210 series closer shipped with EXTRA DUTY arm (non hold-open), metal security cover, and TORX Machine Screw pack. Sized cylinders for interior doors to 5???0??? and exterior doors to 4???0???. Non-sized cylinder adjustable for interior doors to 4???6??? and exterior doors to 3???6???. Closer mounts parallel arm, specify right or left swinging door. 4211 cylinder meets ADA requirements. Standard powder coat finish. The 4210 Series is UL listed with CUSH arms for self-closing doors Tested and certified under ANSI Standard A156.4, grade one. Standard powder coat finish: Aluminum 689, Dark Bronze Painted 690
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Stainless Steel Faceplate Frame Type - Hollow Metal, Alum
... Read more
Stainless Steel Faceplate Frame Type - Hollow Metal, Aluminum or Wood Corrosion - Resistant case and moving parts. Tamper Strength Test - 1700 lbs (765kg) Cycle Test 500,000 cycles Keeper Depth - 5/8??? Maximum Latch Projection Possible with 1/8??? Door/Frame Clearance - 3/4??? Strike Depth 1.50??? Overall Reversible - Non Handed. (w/o deadbolt) Fully Tamper Proof Horizontal Adjustment To compensate for misalignment and warpage. 1-1/2" Jamb Modification Finishes: Brass US3, Oil Rubbed Bronze US10B and Stainless Steel US32D
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
OSHA signs are the perfect way to alert your employees and
... Read more
OSHA signs are the perfect way to alert your employees and guests when a hazard is present in your facility. Keep your facility safe, buy an OSHA regulated sign today and prevent an accident tomorrow. These OSHA signs comply with OSHA 29 CFR 1910.145
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Stainless Steel Faceplate Frame Type - Hollow Metal, Alum
... Read more
Stainless Steel Faceplate Frame Type - Hollow Metal, Aluminum or Wood Corrosion - Resistant case and moving parts. Tamper Strength Test - 1700 lbs (765kg) Cycle Test 500,000 cycles Keeper Depth - 5/8??? Maximum Latch Projection Possible with 1/8??? Door/Frame Clearance - 3/4??? Strike Depth 1.50??? Overall Reversible - Non Handed. (w/o deadbolt) Fully Tamper Proof Horizontal Adjustment To compensate for misalignment and warpage. 2" Jamb Modification Cutout for deadbolt Finishes: Brass US3, Oil Rubbed Bronze US10B and Stainless Steel US32D
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Patented Quick Reversible feature enables reversal of hands
... Read more
Patented Quick Reversible feature enables reversal of hands without disassembling the lock case (Patent # 6,349,982) Security trims provide a vandal-resistant barrier Can be used with new or existing Corbin Russwin key systems, including patented high-security Pyramid cylinders. (Patent # 6,125,674) Also accepts cylinders of most other manufacturers. Provides life safety and security in a single door prep, saving the additional cost of a deadlock Through-bolted trim designs for proper alignment and increased security Finishes: BHMA 605 (US3) Bright Brass, BHMA 606 (US4) Satin Brass, BHMA 612 (US10) Satin Bronze, BHMA 613 (US10B) Oxidized Bronze, oil rubbed, BHMA 625 (US26) Bright Chromium Plated, BHMA 626 (US26D) Satin Chromium Plated and BHMA 630 (US32D) Satin Stainless Steel. Includes lockcase, lever or escutcheon trim package, armored front, strike and screw pack.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
|
|
from $12
(3 stores)
See Details
|
|
|
|
|
from $11
(2 stores)
See Details
|
|
|
Patented Quick Reversible feature enables reversal of hands
... Read more
Patented Quick Reversible feature enables reversal of hands without disassembling the lock case (Patent # 6,349,982) Security trims provide a vandal-resistant barrier Can be used with new or existing Corbin Russwin key systems, including patented high-security Pyramid cylinders. (Patent # 6,125,674) Also accepts cylinders of most other manufacturers. Provides life safety and security in a single door prep, saving the additional cost of a deadlock Through-bolted trim designs for proper alignment and increased security Finishes: BHMA 605 (US3) Bright Brass, BHMA 606 (US4) Satin Brass, BHMA 612 (US10) Satin Bronze, BHMA 613 (US10B) Oxidized Bronze, oil rubbed, BHMA 625 (US26) Bright Chromium Plated, BHMA 626 (US26D) Satin Chromium Plated and BHMA 630 (US32D) Satin Stainless Steel. Includes lockcase, knob or escutcheon trim package, armored front, strike and screw pack.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Patented Quick Reversible feature enables reversal of hands
... Read more
Patented Quick Reversible feature enables reversal of hands without disassembling the lock case (Patent # 6,349,982) Security trims provide a vandal-resistant barrier Can be used with new or existing Corbin Russwin key systems, including patented high-security Pyramid cylinders. (Patent # 6,125,674) Also accepts cylinders of most other manufacturers. Provides life safety and security in a single door prep, saving the additional cost of a deadlock Through-bolted trim designs for proper alignment and increased security Finishes: BHMA 605 (US3) Bright Brass, BHMA 606 (US4) Satin Brass, BHMA 612 (US10) Satin Bronze, BHMA 613 (US10B) Oxidized Bronze, BHMA 626 (US26D) Satin Chromium Plated and BHMA 630 (US32D) Satin Stainless Steel. Includes lockcase, lever or escutcheon trim package, armored front, strike and screw pack.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
idealtrades Store Click here to get eBay selling tools at A
... Read more
idealtrades Store Click here to get eBay selling tools at Auctiva.com thankthanks for your consideration!! Good Luck! On Aug-26-03 at 05:21:58 PDT, seller added the following information: After purchasing, pay instantly with your credit card through PayPal! On Dec-29-04 at 11:16:58 PST, seller added the following information: View and search all the items in my picture gallery Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items. Powered
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
Go To Store
|
|
|
The Strongest Lock on the Block When it comes to strength a
... Read more
The Strongest Lock on the Block When it comes to strength and durability Fast and easy installation. Lock is easily re-handed without removing parts or opening the lock case Aesthetic design. Many lever styles available to match a wide range of styles Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life Through-bolted lever trim for increased security Torx?? and spanner screws Easy operation. Only 30?? of lever rotation required to retract latchbolt Lever springs contained inside of the lock case Pre-assembled components make installation fool-proof Installation time ??? reduced by up to 40% Lock is easily re-handed without removing parts or opening case Finishes: 03 Bright Brass, Clear Coated (BHMA 605), 04 Satin Brass, Clear Coated (BHMA 606), 10 Satin Bronze, Clear Coated (BHMA 612), 10B Dark Oxidized Satin Bronze, Oil R
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The Strongest Lock on the Block When it comes to strength a
... Read more
The Strongest Lock on the Block When it comes to strength and durability Fast and easy installation. Lock is easily re-handed without removing parts or opening the lock case Aesthetic design. Many lever styles available to match a wide range of styles Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life Through-bolted lever trim for increased security Torx?? and spanner screws Easy operation. Only 30?? of lever rotation required to retract latchbolt Lever springs contained inside of the lock case Pre-assembled components make installation fool-proof Installation time ??? reduced by up to 40% Lock is easily re-handed without removing parts or opening case Finishes: 03 Bright Brass, Clear Coated (BHMA 605), 04 Satin Brass, Clear Coated (BHMA 606), 10 Satin Bronze, Clear Coated (BHMA 612), 10B Dark Oxidized Satin Bronze, Oil R
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Easy rekeyability - allows for a quick installation and inc
... Read more
Easy rekeyability - allows for a quick installation and increased productivity Once inch face - covers chips in laminate without an additional trim ring Non-handed - field reversible locking positions: right-hand, left-hand, vertical and inverted Only 2 cams required - ships with reversible straight and offset cams that meet requirements of all locking positions Anti-rotation plate - eliminates lock rotation, prevents loosening of fixing nut, and provides additional security in particleboard applications Finger pull - optional finger pull eliminates need for additional cabinet pull, mounts on front of lock Lost motion - key removable in locked or unlocked position, optional key-retaining shifters available
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
|
|
from $16
(4 stores)
See Details
|
|
|
3" Brass Modern Surface Bolt with 15/16" ThrowThis 3" brass
... Read more
3" Brass Modern Surface Bolt with 15/16" ThrowThis 3" brass modern surface bolt with 15/16" throw features a concealed screw design to enhance the appearance and security. The interlocking construction provides strength and durability.Features:Made From Cast AluminumExceptional Strength and Durability Provided By Interlocking Construction of Heavy Gauge Track and RodPermanent Stop Prevents Rod Disengagement From TrackTension Spring Holds Bolt In Desired PositionTrack Assures Smooth Operation and Interlocks with Side Edges of Rod to Eliminate MarringDecorative 5/8" Diameter Knob Designed to Facilitate Bolt OperationsMade From BrassPacked with Both Universal and Mortise Strikes Optional Surface Strike AvailableThrow: 15/16"Width: 11/16"Length: 3"Projection: 3/4"IVES has produced a full line of quality building hardware for over 120 years Throughout this time, IVES has adhered to the firm convictions of its founder, Hobart B Ives, that the success of a company is dependent on two major factors product quality and customer service Today, IVES reputation is known for these core principles Emphasis is also placed on application flexibility and value IVES extensive hardware line includes a variety of pivots, flush bolts, push/pull handles, kick plates, doorstops, hinges and more
Minimize
|
|
Go To Store
|
|
|
Installed in the center hinge position of the door, PTH Pow
... Read more
Installed in the center hinge position of the door, PTH Power Transfer Hinges provide the concealed wires required between the door and the frame, for the purpose of powering and monitoring electric door hardware. Four (4) Conductor Power Transfer Hinge 1 Amp @ 12/24V per pair Compatible With Electrified Mortise Locks Electrified Cylindrical Locks Delayed Egress Exit Devices Electric Trim Electric Strikes in Pair of Doors In addition to compatibility with other manufacturers electric hardware products, the PTH power transfer hinge may be used with the following SDC products. Electrified Mortise Locksets 7800 series Electrified Cylindrical Locksets Z7200 Series Delayed Egress Exit Devices 6000 series Request-to-Exit Bars PSB560 series, MSB550 series UL 10B Listed for 3Hr fire rated doors. Look for the ???F??? mark located next to the UL symbol that confirms the PTH series hinge UL fire rating. All base material, steel Finish: Dull Chrome (standard)
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
Protect people and the environment with Eco Safety Sign "NO
... Read more
Protect people and the environment with Eco Safety Sign "NOTICE Security Alarm Will Sound If Door Is Opened" and other ZING Green Safety Signs that inform of Danger, Notice and Caution areas. Sign is made of rapidly renewable Self Adhesive. Recycled material supports LEED accreditation. Sign measures 10"H x 14"W. Made in the USA.
Minimize
Get free shipping on orders over $25!
In stock
|
|
Go To Store
|
|
|
The High Security Solution The 392+ is available for pair
... Read more
The High Security Solution The 392+ is available for pairs of hollow metal, aluminum, and wood doors and frames and glass doors without a mullion. Fully Automatic Voltage Selection simplifies installation Modular design employs a standardized circuit board with easy to install connectors, adjustable mounting brackets, integrated mounting screws, and slide-in architectural finish plates The uniquely designed armature housing holds the armature in place, eliminating the noise and sagging possible with other armatures The armature housing increases the overall reliability of the product and provides an aesthetically pleasing look over traditional armature mountings, blending into the surrounding environment more easily The armature housing holds the magnet for the DSM option without having to mount an additional plate to the armature, ensuring quicker, more reliable installation Finishes: Satin Black, Anodized US19 and Satin Aluminum, Anodized Standard US28
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The High Security Traffic Control Solution The 322+ is av
... Read more
The High Security Traffic Control Solution The 322+ is available for pairs of hollow metal, aluminum, and wood doors and frames and glass doors without a mullion. Excellent choice for interior high security applications Fully Automatic Voltage Selection simplifies installation Modular design employs a standardized circuit board with easy to install connectors, adjustable mounting brackets, integrated mounting screws, and slide-in architectural finish plates The uniquely designed armature housing holds the armature in place, eliminating the noise and sagging possible with other armatures The armature housing increases the overall reliability of the product and provides an aesthetically pleasing look over traditional armature mountings, blending into the surrounding environment more easily Finishes: 628 Satin Chrome, 313 Dark Bronze Anodized
Minimize
|
This store is not yet rated
|
Go To Store
|
|
|
The Strongest Lock on the Block When it comes to strength a
... Read more
The Strongest Lock on the Block When it comes to strength and durability Fast and easy installation. Lock is easily re-handed without removing parts or opening the lock case Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life Through-bolted knob trim for increased security Torx?? and spanner screws Lever springs contained inside of the lock case Pre-assembled components make installation fool-proof Installation time ??? reduced by up to 40% Lock is easily re-handed without removing parts or opening case Standard Knob: OB - O Rose, B Knob Finishes: 26D Satin Chrome Plated (BHMA 626)
Minimize
|
This store is not yet rated
|
Go To Store
|