> Building Supplies > mortise lock/store security snobs

Master Lock General Security Combo Padlock, Green Dial Pat ... Read more

Master Lock General Security Combo Padlock, Green Dial Patent Pending BlockGuard Anti-Shim Technology withstands attempts to violate the latch mechanism. Includes combination chart to facilitate lock system administration. 3/4" (19mm) tall, hardened steel shackle for extra cut resistance. Easy 3-number dialing with automatic scrambling feature to prevent reopening of lock. All Master Lock products are non-returnable. 3.09 L. 1.98 W. 1.38 H. Minimize

This mortise lock set is specially made to fit some replace ... Read more

This mortise lock set is specially made to fit some replacement entrance sets, and offers superior security for your home or business. Available in right and left hand function and in your choice of finish. Signature Hardware recommends installation by a locksmith. Shown here in Polished Brass finish. Available in finishes listed below. Fits with knob-to-knob entrance sets listed below. Fits doors with a standard 2-1/2" backset and thickness of 1-3/8" to 1-3/4". Features Schlage keyway with two keys and interior thumb turn. Includes 4" privacy spindle with 16 threads per inch. Includes face plate, strike plate, and fastening hardware. Mortise case measures .875" W x 3.5" D. Armour front measures 1.25" W x 8" H. 3.437" center-to-center measurement from knob to cylinder. 2.25" center-to-center measurement from knob to interior thumb turn. Handing required. (Mortise is reversible in the Minimize

Tubular mortise lock in a non standard 2 1/4" back set. The ... Read more

Tubular mortise lock in a non standard 2 1/4" back set. The tubular conversion latch is designed to fit in modern door cut out's and facilitate use of either original or reproduction antique door lock sets. Minimize

The Strongest Lock on the Block When it comes to strength a ... Read more

The Strongest Lock on the Block When it comes to strength and durability Fast and easy installation. Lock is easily re-handed without removing parts or opening the lock case Aesthetic design. Many lever styles available to match a wide range of styles Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life Through-bolted lever trim for increased security Torx?? and spanner screws Easy operation. Only 30?? of lever rotation required to retract latchbolt Lever springs contained inside of the lock case Pre-assembled components make installation fool-proof Installation time ??? reduced by up to 40% Lock is easily re-handed without removing parts or opening case Finishes: 03 Bright Brass, Clear Coated (BHMA 605), 04 Satin Brass, Clear Coated (BHMA 606), 10 Satin Bronze, Clear Coated (BHMA 612), 10B Dark Oxidized Satin Bronze, Oil R Minimize

This mortise lock set is specially made to fit some replace ... Read more

This mortise lock set is specially made to fit some replacement entrance sets, and offers superior security for your home or business. Available in right and left hand function and in your choice of finish. Signature Hardware recommends installation by a locksmith. Shown here in Polished Brass finish. Available in finishes listed below. Fits with knob-to-knob entrance sets listed below. Fits doors with a standard 2-1/2" backset and thickness of 1-3/8" to 1-3/4". Features Schlage keyway with two keys and interior thumb turn. Includes 4" privacy spindle with 16 threads per inch. Includes face plate, strike plate, and fastening hardware. Mortise case measures .875" W x 3.5" D. Armour front measures 1.25" W x 8" H. 3.437" center-to-center measurement from knob to cylinder. 2.25" center-to-center measurement from knob to interior thumb turn. Handing required. (Mortise is reversible in the Minimize

Why Pay More When You Can Buy It Now???You are looking at a ... Read more

Why Pay More When You Can Buy It Now???You are looking at a brand new Security entry mortise lock. This is model E-2294. This does come with two keys.This is sealed in its original package.I am offering FREE shipping on this item!!!We have a wide variety of inventory here at pjdeals, please look at our other listings. You never know what you will find. Check out my other items !Be sure to add me to your favorites list ! Minimize

Master Lock High Security Brass Solid Body Padlocks - No. 6 ... Read more

Master Lock High Security Brass Solid Body Padlocks - No. 6830B Features ProSeries Padlocks are designed for Commercial/Industrial applications1-9/16" (40mm) wide solid brass body provides extra resistance in caustic, corrosive environments1-1/16" (27mm) tall, 1/4" (6mm) diameter brass shackle for superior corrosion resistanceDual ball locking mechanism resists pulling and pryingHigh security, Rekeyable 5-pin cylinder with spool pins is virtually impossible to pickBest Used For: Industrial, Storefront & Business GatesManufacturing EnvironmentsUtility Meters, Substations & Cable BoxesMarine Recreation Minimize

Shop for Door Locks at The Home Depot. First Watch Security ... Read more

Shop for Door Locks at The Home Depot. First Watch Security has been designing, manufacturing, and deliverying home security products since 1959. Today, First Watch Security is one of the most recognized brands in the market. Our Brand is found on products that include home, office, and door security offerings. Our knobs and rosettes are designed to replace or upgrade most applications. Choose from a variety of traditional or contemporary styles and finishes that meet your passage and privacy applications. Minimize

Mortise lock strike in standard size with brass finish. Thi ... Read more

Mortise lock strike in standard size with brass finish. This strike measures 3 3/8" tall by 7/8" wide with the tongue projecting 1/2". Minimize

Strength and Durability 1. Fully wrapped heavy-gauge ste ... Read more

Strength and Durability 1. Fully wrapped heavy-gauge steel case protects against door edge attacks 2. All-metal zinc dichromate-plated working parts 3. Inside lock case protects electronic components 4. Two-piece anti-friction tongue reduces wear and tear 5. Outside and inside trim thru-bolted together and through the door Security Built In 6. Break-away spindle prevents unsecured failures and provides easy spindle replacement 7. Hub blocking plate protects lock against spindle manipulation 8. Spring-loaded fusible link provides fail secure mode in case of fire 9. Inside lever applied by screwless shank mounting ??? no exposed trim mount screws Adaptable To Your Application 10. Universal lock case ??? ten functions in one case 11. Floating mounting tabs automatically adjust to fit a beveled door edge 12. Field-reversible handing without opening lock case 13. External spring cages allow for simple trim retrofit 14. Locking thumbturn on the inside of door visua Minimize

Master Lock High Security Brass Solid Body Padlocks - No. 6 ... Read more

Master Lock High Security Brass Solid Body Padlocks - No. 6830LF Features ProSeries Padlocks are designed for Commercial/Industrial applications1-9/16" (40mm) wide solid brass body provides extra resistance in caustic, corrosive environments1-9/16" (40mm) tall, 1/4" (6mm) diameter hardened boron alloy shackle for superior cut resistanceDual ball locking mechanism resists pulling and pryingHigh security, Rekeyable 5-pin cylinder with spool pins is virtually impossible to pickHigh security, Rekeyable 5-pin cylinder with spool pins is virtually impossible to pickBest Used For: Industrial, Storefront & Business GatesManufacturing EnvironmentsUtility Meters, Substations & Cable BoxesMarine Recreation Minimize

Baldwin Store Door Mortise Lock - Ansi F14 - 2 3/4" Backset ... Read more

Baldwin Store Door Mortise Lock - Ansi F14 - 2 3/4" Backset - Latch Bolt By Handle Inside And Guest/master Key Outside. Outside Handle Always Rigid. Deadbolt By Thumb Turn Inside And Service Key Only Outside. Fse: Ansi Series: 1000-f14 Minimize

Mortise lock parts for a standard 2 3/8" back set. A tubula ... Read more

Mortise lock parts for a standard 2 3/8" back set. A tubular conversion latch with a double spring designed to fit in modern door cut outs. Minimize

Master Lock High Security Steel Solid Body Padlocks - No. 7 ... Read more

Master Lock High Security Steel Solid Body Padlocks - No. 7040 Features ProSeries Padlocks are designed for Commercial/Industrial applications1-3/4" (44mm) heavy hardened steel body with chrome rust proofing for high security with long life1-3/16" (30mm) tall, 5/16" (8mm) diameter hardened boron alloy shackle for superior cut resistanceDual ball locking mechanism resists pulling and pryingHigh security, Rekeyable 5-pin cylinder with spool pins is virtually impossible to pickBest Used For: Industrial, Storefront & Business GatesTrailers, Vans & Moving TrucksTruck DoorsConstruction Sites & Equipment Minimize

This mortise lock set is specially made to fit some replace ... Read more

This mortise lock set is specially made to fit some replacement entrance sets, and offers superior security for your home or business. Available in right and left hand function and in your choice of finish. Signature Hardware recommends installation by a locksmith. Shown here in Polished Brass finish. Available in finishes listed below. Fits with knob-to-knob entrance sets listed below. Fits doors with a standard 2-1/2" backset and thickness of 1-3/8" to 1-3/4". Features Schlage keyway with two keys and interior thumb turn. Includes 4" privacy spindle with 16 threads per inch. Includes face plate, strike plate, and fastening hardware. Mortise case measures .875" W x 3.5" D. Armour front measures 1.25" W x 8" H. 3.437" center-to-center measurement from knob to cylinder. 2.25" center-to-center measurement from knob to interior thumb turn. Handing required. (Mortise is reversible in the Minimize

The Strongest Lock on the Block When it comes to strength a ... Read more

The Strongest Lock on the Block When it comes to strength and durability Fast and easy installation. Lock is easily re-handed without removing parts or opening the lock case Aesthetic design. Many lever styles available to match a wide range of styles Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life Through-bolted lever trim for increased security Torx?? and spanner screws Easy operation. Only 30?? of lever rotation required to retract latchbolt Lever springs contained inside of the lock case Pre-assembled components make installation fool-proof Installation time ??? reduced by up to 40% Lock is easily re-handed without removing parts or opening case Finishes: 03 Bright Brass, Clear Coated (BHMA 605), 04 Satin Brass, Clear Coated (BHMA 606), 10 Satin Bronze, Clear Coated (BHMA 612), 10B Dark Oxidized Satin Bronze, Oil R Minimize

Lock: 3-9/16"H x 3"L x 9/16"W Faceplate: 5-1/2"H x 7/8"W ... Read more

Lock: 3-9/16"H x 3"L x 9/16"W Faceplate: 5-1/2"H x 7/8"W Deadbolt locks from both sides Includes 2 brass knobs, mortise trim plate & 2 keys Trim plate (Ace No. 50368) Knobs (Ace No. 50361) Mortise lock (Ace No. 5285317) Strike (Ace No. 50372) Minimize

Master Lock High Security Brass Solid Body Padlocks - No. 6 ... Read more

Master Lock High Security Brass Solid Body Padlocks - No. 6840LF Features ProSeries Padlocks are designed for Commercial/Industrial applications1-3/4" (44mm) wide brass body provides extra corrosion resistance in caustic, corrosive, salty environments1-9/16" (40mm) tall, 5/16" (8mm) diameter hardened boron alloy shackle for superior cut resistanceDual ball locking mechanism resists pulling and pryingHigh security, Rekeyable 5-pin cylinder with spool pins is virtually impossible to pickHigh security, Rekeyable 5-pin cylinder with spool pins is virtually impossible to pickBest Used For: Industrial, Storefront & Business GatesManufacturing EnvironmentsUtility Meters, Substations & Cable BoxesMarine Recreation Minimize

This mortise lock set is specially made to fit some replace ... Read more

This mortise lock set is specially made to fit some replacement entrance sets, and offers superior security for your home or business. Available in right and left hand function and in your choice of finish. Signature Hardware recommends installation by a locksmith. Shown here in Polished Brass finish. Available in finishes listed below. Fits with knob-to-knob entrance sets listed below. Fits doors with a standard 2-1/2" backset and thickness of 1-3/8" to 1-3/4". Features Schlage keyway with two keys and interior thumb turn. Includes 4" privacy spindle with 16 threads per inch. Includes face plate, strike plate, and fastening hardware. Mortise case measures .875" W x 3.5" D. Armour front measures 1.25" W x 8" H. 3.437" center-to-center measurement from knob to cylinder. 2.25" center-to-center measurement from knob to interior thumb turn. Handing required. (Mortise is reversible in the Minimize

Master Lock High Security Steel Weather Resistant Covered L ... Read more

Master Lock High Security Steel Weather Resistant Covered Laminated Padlocks - No. 6125KA Features Keyed Alike - order multiple locks to open with the same key or order to match other locks with the W6000 cylinderIdeal for harsh outdoor conditions - exclusive Pro Series Weather Tough cover protects lock from water, ice, dirt and grimeProSeries Padlocks are designed for Commercial/Industrial applications2-3/8" (61mm) heavy steel body withstands physical attack1-3/8" (35mm) tall, 3/8" (10mm) diameter hardened boron alloy shackle for maximum cut resistanceDual ball locking mechanism resists pulling and pryingHigh security, Rekeyable 5-pin cylinder with spool pins is virtually impossible to pickBest Used For: Truck DoorsTrailers, Vans & Moving TrucksManufacturing EnvironmentsIndustrial, Storefront & Business Gates Minimize

HOME SHIPPING SIGN UP CONTACT US VISIT OUR STORE Camera Cel ... Read more

HOME SHIPPING SIGN UP CONTACT US VISIT OUR STORE Camera Cell phone Fashion Gadgets Games Home ACC MP3 Music PC Sports Product Description Store Cabinet Door Replacement Security Lock Silver Tone Please note that we are selling factory direct products. All our products are 100% brand new in manufacturer's packaging. Specification: Product Name Keyless Cam Lock Main Material Metal Color Silver Tone Total Size 5 x 2.8 x 4.1cm/2.2'' x1.1'' x 1.6'' (L*W*H) Cam Size 3.7 x 1.7cm/1.4'' x 0.67''(L*W) We Minimize

The Strongest Lock on the Block When it comes to strength a ... Read more

The Strongest Lock on the Block When it comes to strength and durability Fast and easy installation. Lock is easily re-handed without removing parts or opening the lock case Aesthetic design. Many lever styles available to match a wide range of styles Exceeds cycle testing requirements by 14 times the ANSI/BHMA A156.13 Grade 1 Standard Heavy duty wrought steel hubs and high carbon steel spring cartridge provide superior strength and cycle life Through-bolted lever trim for increased security Torx?? and spanner screws Easy operation. Only 30?? of lever rotation required to retract latchbolt Lever springs contained inside of the lock case Pre-assembled components make installation fool-proof Installation time ??? reduced by up to 40% Lock is easily re-handed without removing parts or opening case Finishes: 03 Bright Brass, Clear Coated (BHMA 605), 04 Satin Brass, Clear Coated (BHMA 606), 10 Satin Bronze, Clear Coated (BHMA 612), 10B Dark Oxidized Satin Bronze, Oil R Minimize