|
3/8-16 x 1 Grade 5 Carriage Bolt Zinc - Grade 5 Carriage Bo
... Read more
3/8-16 x 1 Grade 5 Carriage Bolt Zinc - Grade 5 Carriage Bolts are manufactured from medium carbon steel. Our Grade 5 material meets or exceeds SAE J429 Grade 5 specifications and is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 1 inch is HRC 25-34. Tensile strength on diameters 1/4 to 1 inch will meet a minimum of 120,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1-8 x 2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufa
... Read more
1-8 x 2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1/4-20 x 1 1/2 A307 Grade A Carriage Bolt HDG - A307 Grade
... Read more
1/4-20 x 1 1/2 A307 Grade A Carriage Bolt HDG - A307 Grade A Carriage Bolts are manufactured from low carbon steel to meet or exceed ASTM A307 Grade A. Material is manufactured with rolled threads. Lengths out to 6 inches will be fully threaded. Lengths over 6 to 12 inches will have 6 inches of thread; Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness will range from HRB 69-100 and a minimum tensile strength of 60,000 psi is required.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1/2-13 x 5 A307 Grade A Carriage Bolt Zinc - A307 Grade A C
... Read more
1/2-13 x 5 A307 Grade A Carriage Bolt Zinc - A307 Grade A Carriage Bolts are manufactured from low carbon steel to meet or exceed ASTM A307 Grade A. Material is manufactured with rolled threads. Lengths out to 6 inches will be fully threaded. Lengths over 6 to 12 inches will have 6 inches of thread; Zinc plated material will meet or exceed ASTM F1941. Hot-Dip Galvanized material will meet or exceed ASTM A153. Typical hardness will range from HRB 69-100 and a minimum tensile strength of 60,000 psi is required.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Shutter fasteners including this extra heavy-duty shutter b
... Read more
Shutter fasteners including this extra heavy-duty shutter bolt is as strong as they come. Made of rust-resistant stainless steel with a durable black powder coat, it will withstand the elements, season after season. The classic colonial styling goes with any traditional or rustic home.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1/2-13 x 1 1/2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are
... Read more
1/2-13 x 1 1/2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1/2-13 x 2 1/2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are
... Read more
1/2-13 x 2 1/2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1/2-13 x 1 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are man
... Read more
1/2-13 x 1 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
The Klein Tools 1-1/16in. broad head bull pin is ideal for
... Read more
The Klein Tools 1-1/16in. broad head bull pin is ideal for aligning bolt holes when working with steel construction. The corrosion resistant black finish prevents rusting and the heat treated quality steel alloy material assures a strong and durable tool. While the standard design costs less then the Broad head design resists mushrooming, providing longer tool life than found with conventional bull pin designs. U.S.A.
Minimize
Get free shipping on orders over $25!
In stock
|
|
Go To Store
|
|
3/8 Drop-in Anchor Setting Tool - Setting tool to be used t
... Read more
3/8 Drop-in Anchor Setting Tool - Setting tool to be used to install Drop-In Anchors
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1/4 Drop-in Anchor Setting Tool - Setting tool to be used t
... Read more
1/4 Drop-in Anchor Setting Tool - Setting tool to be used to install Drop-In Anchors
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1-8 x 5 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufa
... Read more
1-8 x 5 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Concealed hardware for attaching both ends of a rail betwee
... Read more
Concealed hardware for attaching both ends of a rail between 2 posts. Comes with 2 pair of stainless steel springs. 1 pair is right hand and the other pair is left hand. Can be used inside or outside. Tools needed to install and not included are a 1'' wood drill bit and a No. 3 Phillips bit or screwdriver. Epoxy glue can be used, but is not necessary and is sold separately.
Minimize
Fantastic prices with ease & comfort of Amazon.com!
In stock
|
|
Go To Store
|
|
7/8-9 x 6 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manu
... Read more
7/8-9 x 6 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1/2-13 x 7 Grade 2 Hex Bolt Plain - Grade 2 Hex Bolts are m
... Read more
1/2-13 x 7 Grade 2 Hex Bolt Plain - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Mortising Router Bits - Screw Type - Cutter Only (1/4 - 28
... Read more
Mortising Router Bits - Screw Type - Cutter Only (1/4 - 28 & 5/16 - 24 Thread)
Minimize
Ships same day M-F if placed by 4:15pm EST
In stock
|
|
Go To Store
|
|
1-8 x 5 1/2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are ma
... Read more
1-8 x 5 1/2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
3/4-10 x 3 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are man
... Read more
3/4-10 x 3 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
3/4-10 x 2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are man
... Read more
3/4-10 x 2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
7/8-9 x 2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manu
... Read more
7/8-9 x 2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
7/8-9 x 3 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manu
... Read more
7/8-9 x 3 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1-8 x 3 1/2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are ma
... Read more
1-8 x 3 1/2 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
3/8-16 x 6 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are man
... Read more
3/8-16 x 6 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1-8 x 7 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufa
... Read more
1-8 x 7 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1/2-13 x 2 1/2 Grade 2 Hex Bolt Plain - Grade 2 Hex Bolts a
... Read more
1/2-13 x 2 1/2 Grade 2 Hex Bolt Plain - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
3/4-10 x 1 3/4 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are
... Read more
3/4-10 x 1 3/4 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
7/8-9 x 12 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are man
... Read more
7/8-9 x 12 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
1-8 x 9 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufa
... Read more
1-8 x 9 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
3/4-10 x 4 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are man
... Read more
3/4-10 x 4 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
3/8-16 x 9 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are man
... Read more
3/8-16 x 9 Grade 2 Hex Bolt HDG - Grade 2 Hex Bolts are manufactured from low carbon steel, typically 1015-1022. Our Grade 2 bolting meets or exceeds SAE J429 Grade 2. Material is manufactured with rolled threads. Zinc plated material meets or exceeds ASTM F1941. Typical hardness on diameters of 1/4 to 3/4 inch ranges from HRB 80-100 with diameters over 3/4 inch ranging from HRB 70-100. Tensile strength on diameters of 1/4 to 3/4 inch up to 6 inches in length will meet or exceed 74,000 psi. Diameters over 3/4 inch and longer than 6 inches will meet or exceed 60,000 psi.
Minimize
|
This store is not yet rated
|
Go To Store
|