> Building Supplies > drill/store mcfeely s

Self Drilling Screw, Head Type Hex Washer, Thread Size #12- ... Read more

Self Drilling Screw, Head Type Hex Washer, Thread Size #12-14, Length 2 In, 305 Stainless Steel, Plain Finish, Drive Type Hex Washer, Driver Size 5/16 In, Head Dia. 0.425 In, Head Height 0.228 In, Hex Width 0.305 To 0.312 In, Washer O.d. 0.415 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching A Variety Of Materials To Fiberglass, Composites, Fiber Cement And Aluminum Up To 0.209 In, Package Quantity 1000 Minimize

1/4-20 x 3 3/4 Phillips Flat with Wings Self Drill Screw WA ... Read more

1/4-20 x 3 3/4 Phillips Flat with Wings Self Drill Screw WAR Coated - Phillips flat head tapping screw , spaced or unified threads, and a #3 or #4 drill point. Designed to drill through steel to attach wood to metal. AISI 1022 or equivalent steel. Rockwell C50-56. Meets F.I.P.-1000.7 for torsional strength & drill speed. Meets ASTM A 510 for carbon steel manufacturing. Exceeds 1,000/hr. salt spray resistance. Designed to work with ACQ treated lumber. Highly corrosion resistant. Minimize

Self Drilling Screw, Head Type Hex Washer, Thread Size #12- ... Read more

Self Drilling Screw, Head Type Hex Washer, Thread Size #12-14, Length 1 1/2 In, 305 Stainless Steel, Plain Finish, Drive Type Hex Washer, Driver Size 5/16 In, Head Dia. 0.425 In, Head Height 0.228 In, Hex Width 0.305 To 0.312 In, Washer O.d. 0.415 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching A Variety Of Materials To Fiberglass, Composites, Fiber Cement And Aluminum Up To 0.209 In, Package Quantity 100 Minimize

Self Tapping Screws are designed to advance when turned, cr ... Read more

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. Minimize

Self Drilling Screw, Head Type Hex Washer, Thread Size #12- ... Read more

Self Drilling Screw, Head Type Hex Washer, Thread Size #12-14, Length 3 In, 305 Stainless Steel, Plain Finish, Drive Type Hex Washer, Driver Size 5/16 In, Head Dia. 0.425 In, Head Height 0.228 In, Hex Width 0.305 To 0.312 In, Washer O.d. 0.415 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching A Variety Of Materials To Fiberglass, Composites, Fiber Cement And Aluminum Up To 0.209 In, Package Quantity 100 Minimize

Supports Drilled Shelves Requires 3/8" (10 mm) Hole in Glas ... Read more

Supports Drilled Shelves Requires 3/8" (10 mm) Hole in Glass CRL's Satin Chrome Drill-Thru Support is designed to hold shelves in a horizontal fixed position and is used in single shelf applications. The Drill-Thru Support requires a 3/8 inch (10 millimeter) drilled hole in the glass, is easily adjusted to the desired height on the Rod, and then locked into place by tightening the set screw in the Support. The maximum recommended weight capacity is 25 pounds (11.3 kilograms). Minimize

Self Drilling Screw, Head Type Hex Washer, Thread Size #12- ... Read more

Self Drilling Screw, Head Type Hex Washer, Thread Size #12-14, Length 2 In, 305 Stainless Steel, Plain Finish, Drive Type Hex Washer, Driver Size 5/16 In, Head Dia. 0.425 In, Head Height 0.228 In, Hex Width 0.305 To 0.312 In, Washer O.d. 0.415 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching A Variety Of Materials To Fiberglass, Composites, Fiber Cement And Aluminum Up To 0.209 In, Package Quantity 100 Minimize

1/4-20 x 2 3/4 Phillips Flat with Wings Self Drill Screw WA ... Read more

1/4-20 x 2 3/4 Phillips Flat with Wings Self Drill Screw WAR Coated - Phillips flat head tapping screw , spaced or unified threads, and a #3 or #4 drill point. Designed to drill through steel to attach wood to metal. AISI 1022 or equivalent steel. Rockwell C50-56. Meets F.I.P.-1000.7 for torsional strength & drill speed. Meets ASTM A 510 for carbon steel manufacturing. Exceeds 1,000/hr. salt spray resistance. Designed to work with ACQ treated lumber. Highly corrosion resistant. Minimize

Alno 7 1/4" Backplate Drilled 7 1/4" Backplate Drilled

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex ... Read more

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #14, Length 1 In, Width Of Hex Head 0.375 In, Head Height 0.190 In, Washer Od 0.520 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100 Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel With Neoprene Washer, Zinc Finish, Size 1/4 In, Length 2 In, Driver Size 3/8 In, Width Of Hex Head 0.367 In, Head Height 0.172 In, Washer Dia 0.480 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal Up To 3 Gauge, Meets/exceeds Sae J78, Package 100 Minimize

Self Tapping Screws are designed to advance when turned, cr ... Read more

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #8, Length 1/2 In, Drive Type Hex, Driver Size 1/4 In, Width Of Hex Head 0.250 In, Head Height 0.096 In, Washer O 0.272 In Washer O, Drill Point Size #2, Drill Point Length 0.211 In, For Attaching Variety Of Materials To Metal Up To 12 Gauge, Meets/exceeds Sae J78, Package 1410 Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #12, Length 1 1/2 In, Driver Size 5/16 In, Width Of Hex Head 0.305 In, Head Height 0.139 In, Washer Dia 0.398 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal Up To 5 Gauge, Meets/exceeds Sae J78, Package 50 Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel With Neoprene Washer, Zinc Finish, Size 1/4 In, Length 1 In, Driver Size 3/8 In, Width Of Hex Head 0.367 In, Head Height 0.172 In, Washer Dia 0.480 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal Up To 3 Gauge, Meets/exceeds Sae J78, Package 100 Minimize

Use our Trave Aluminum Brackets with one of our Wing Glass ... Read more

Use our Trave Aluminum Brackets with one of our Wing Glass or Aluminum Shelves to create a stunning display for your home or office. A 5/16" drill bit (sold separately, listed below) is recommended for installation.||Accommodates shelves up to 12" deep and 3/4" thick | Supports up to 55 pounds | Brackets should be no more than 24" apart | Mounting hardware and instructions are included Minimize

Hex washer head Tek screws made of 410 stainless steel. Tek ... Read more

Hex washer head Tek screws made of 410 stainless steel. Tek screws have a self-tapping cut-away point to self drill through sheet metal. Minimize

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex ... Read more

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size 10-16, Length 1 In, Width Of Hex Head 0.312 In, Head Height 0.120 In, Washer Od 0.414 In, Drill Point Size #3, Drill Point Length 0.300 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100 Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #12, Length 1 In, Driver Size 5/16 In, Width Of Hex Head 0.305 In, Head Height 0.139 In, Washer Dia 0.398 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal Up To 5 Gauge, Meets/exceeds Sae J78, Package 100 Minimize

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex ... Read more

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #12, Length 1 1/4 In, Width Of Hex Head 0.312 In, Head Height 0.155 In, Washer Od 0.432 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100 Minimize

Hangar Collection 8 2.5" Pre-Drilled Single Upper Track fo ... Read more

Hangar Collection 8 2.5" Pre-Drilled Single Upper Track for Top Hung Sliding Door SystemCreate a versatile sliding door system with this upper track for a top hung system. This track provides the support for the door and is designed for a single wood door.The Hangar Series is designed for single and by-passing sliding wood doors. It features smooth operation, simple installation, and is vertically adjustable. This series is designed for doors up to 31 lbs. (or 62 lbs. with double running gear) and thicknesses from 3/4" to 1-3/8".Features:8 2.5" (2.5 m) LengthPre-drilledMade of bright aluminum31/62 lb. weight capacity with single/double running gearFor single sliding wood doorsSimple installationSmooth operation3/4" (19mm) to 1.375" (35mm) door thicknessVertically adjustableHafele is committed to finding better ways and it shows in their innovative and beautiful line of door hardware products. These products will lead to better organization and the peace of mind that comes with Hafele brand products. In addition to quality and beauty, Hafele is committed to reducing their environmental impact, so you can buy these products with confidence in every aspect. Minimize

Self Tapping Screws are designed to advance when turned, cr ... Read more

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. Minimize

Alno 7 1/4" Backplate Drilled 7 1/4" Backplate Drilled

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #14, Length 3/4 In, Driver Size 3/8 In, Width Of Hex Head 0.367 In, Head Height 0.172 In, Washer Dia 0.480 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal Up To 3 Gauge, Meets/exceeds Sae J78, Package 50 Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #12, Length 2 In, Driver Size 5/16 In, Width Of Hex Head 0.305 In, Head Height 0.139 In, Washer Dia 0.398 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal Up To 5 Gauge, Meets/exceeds Sae J78, Package 50 Minimize

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex ... Read more

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size 10-16, Length 1 1/2 In, Width Of Hex Head 0.312 In, Head Height 0.120 In, Washer Od 0.414 In, Drill Point Size #3, Drill Point Length 0.300 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100 Minimize

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex ... Read more

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #12, Length 1 1/2 In, Width Of Hex Head 0.312 In, Head Height 0.155 In, Washer Od 0.432 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100 Minimize

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex ... Read more

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #14, Length 1 1/4 In, Width Of Hex Head 0.375 In, Head Height 0.190 In, Washer Od 0.520 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100 Minimize

Self Tapping Screws are designed to advance when turned, cr ... Read more

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. Minimize