|
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex
... Read more
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #14, Length 1 In, Width Of Hex Head 0.375 In, Head Height 0.190 In, Washer Od 0.520 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel With Neoprene Washer, Zinc Finish, Size 1/4 In, Length 2 In, Driver Size 3/8 In, Width Of Hex Head 0.367 In, Head Height 0.172 In, Washer Dia 0.480 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal Up To 3 Gauge, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
1/4-20 x 3 3/4 Phillips Flat with Wings Self Drill Screw WA
... Read more
1/4-20 x 3 3/4 Phillips Flat with Wings Self Drill Screw WAR Coated - Phillips flat head tapping screw , spaced or unified threads, and a #3 or #4 drill point. Designed to drill through steel to attach wood to metal. AISI 1022 or equivalent steel. Rockwell C50-56. Meets F.I.P.-1000.7 for torsional strength & drill speed. Meets ASTM A 510 for carbon steel manufacturing. Exceeds 1,000/hr. salt spray resistance. Designed to work with ACQ treated lumber. Highly corrosion resistant.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Self Tapping Screws are designed to advance when turned, cr
... Read more
Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
Minimize
Get free shipping on orders over $25!
In stock
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #8, Length 1/2 In, Drive Type Hex, Driver Size 1/4 In, Width Of Hex Head 0.250 In, Head Height 0.096 In, Washer O 0.272 In Washer O, Drill Point Size #2, Drill Point Length 0.211 In, For Attaching Variety Of Materials To Metal Up To 12 Gauge, Meets/exceeds Sae J78, Package 1410
Minimize
|
|
Go To Store
|
|
Supports Drilled Shelves Requires 3/8" (10 mm) Hole in Glas
... Read more
Supports Drilled Shelves Requires 3/8" (10 mm) Hole in Glass CRL's Satin Chrome Drill-Thru Support is designed to hold shelves in a horizontal fixed position and is used in single shelf applications. The Drill-Thru Support requires a 3/8 inch (10 millimeter) drilled hole in the glass, is easily adjusted to the desired height on the Rod, and then locked into place by tightening the set screw in the Support. The maximum recommended weight capacity is 25 pounds (11.3 kilograms).
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #12, Length 1 1/2 In, Driver Size 5/16 In, Width Of Hex Head 0.305 In, Head Height 0.139 In, Washer Dia 0.398 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal Up To 5 Gauge, Meets/exceeds Sae J78, Package 50
Minimize
|
|
Go To Store
|
|
1/4-20 x 2 3/4 Phillips Flat with Wings Self Drill Screw WA
... Read more
1/4-20 x 2 3/4 Phillips Flat with Wings Self Drill Screw WAR Coated - Phillips flat head tapping screw , spaced or unified threads, and a #3 or #4 drill point. Designed to drill through steel to attach wood to metal. AISI 1022 or equivalent steel. Rockwell C50-56. Meets F.I.P.-1000.7 for torsional strength & drill speed. Meets ASTM A 510 for carbon steel manufacturing. Exceeds 1,000/hr. salt spray resistance. Designed to work with ACQ treated lumber. Highly corrosion resistant.
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel With Neoprene Washer, Zinc Finish, Size 1/4 In, Length 1 In, Driver Size 3/8 In, Width Of Hex Head 0.367 In, Head Height 0.172 In, Washer Dia 0.480 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal Up To 3 Gauge, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
Alno 7 1/4" Backplate Drilled 7 1/4" Backplate Drilled
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex
... Read more
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size 10-16, Length 1 In, Width Of Hex Head 0.312 In, Head Height 0.120 In, Washer Od 0.414 In, Drill Point Size #3, Drill Point Length 0.300 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #12, Length 1 In, Driver Size 5/16 In, Width Of Hex Head 0.305 In, Head Height 0.139 In, Washer Dia 0.398 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal Up To 5 Gauge, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
Self Tapping Screws are designed to advance when turned, cr
... Read more
Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
Minimize
Get free shipping on orders over $25!
In stock
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex
... Read more
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #12, Length 1 1/4 In, Width Of Hex Head 0.312 In, Head Height 0.155 In, Washer Od 0.432 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #14, Length 3/4 In, Driver Size 3/8 In, Width Of Hex Head 0.367 In, Head Height 0.172 In, Washer Dia 0.480 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal Up To 3 Gauge, Meets/exceeds Sae J78, Package 50
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #12, Length 2 In, Driver Size 5/16 In, Width Of Hex Head 0.305 In, Head Height 0.139 In, Washer Dia 0.398 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal Up To 5 Gauge, Meets/exceeds Sae J78, Package 50
Minimize
|
|
Go To Store
|
|
Use our Trave Aluminum Brackets with one of our Wing Glass
... Read more
Use our Trave Aluminum Brackets with one of our Wing Glass or Aluminum Shelves to create a stunning display for your home or office. A 5/16" drill bit (sold separately, listed below) is recommended for installation.||Accommodates shelves up to 12" deep and 3/4" thick | Supports up to 55 pounds | Brackets should be no more than 24" apart | Mounting hardware and instructions are included
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex
... Read more
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size 10-16, Length 1 1/2 In, Width Of Hex Head 0.312 In, Head Height 0.120 In, Washer Od 0.414 In, Drill Point Size #3, Drill Point Length 0.300 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex
... Read more
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #12, Length 1 1/2 In, Width Of Hex Head 0.312 In, Head Height 0.155 In, Washer Od 0.432 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex
... Read more
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #14, Length 1 1/4 In, Width Of Hex Head 0.375 In, Head Height 0.190 In, Washer Od 0.520 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
Self Tapping Screws are designed to advance when turned, cr
... Read more
Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
Minimize
Get free shipping on orders over $25!
In stock
|
|
Go To Store
|
|
Alno 7 1/4" Backplate Drilled 7 1/4" Backplate Drilled
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #10, Length 1 In, Driver Size 5/16 In, Width Of Hex Head 0.305 In, Head Height 0.105 In, Washer Dia 0.384 In, Drill Point Size #3, Drill Point Length 0.300 In, For Attaching Variety Of Materials To Metal Up To 7 Gauge, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #8, Length 3/4 In, Drive Type Hex, Driver Size 1/4 In, Width Of Hex Head 0.250 In, Head Height 0.096 In, Washer O 0.272 In Washer O, Drill Point Size #2, Drill Point Length 0.211 In, For Attaching Variety Of Materials To Metal Up To 12 Gauge, Meets/exceeds Sae J78, Package 1120
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel With Neoprene Washer, Zinc Finish, Size 1/4 In, Length 3/4 In, Driver Size 3/8 In, Width Of Hex Head 0.367 In, Head Height 0.172 In, Washer Dia 0.480 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal Up To 3 Gauge, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har
... Read more
Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel With Neoprene Washer, Zinc Finish, Size 1/4 In, Length 3 In, Driver Size 3/8 In, Width Of Hex Head 0.367 In, Head Height 0.172 In, Washer Dia 0.480 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal Up To 3 Gauge, Meets/exceeds Sae J78, Package 50
Minimize
|
|
Go To Store
|
|
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex
... Read more
Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #14, Length 2 In, Width Of Hex Head 0.375 In, Head Height 0.190 In, Washer Od 0.520 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100
Minimize
|
|
Go To Store
|
|
These are truly the "Rolls Royce" of screws, and they are v
... Read more
These are truly the "Rolls Royce" of screws, and they are very expensive at hardware and building supply stores. These are made from hardened steel with a zinc coating to help prevent rust. The tough EPDM rubber washers are securely bonded to the backup washer, so they stay put when you draw them down tight. Cheaper screws have rubber washers that are simply put on the screw shank loose, and they often spin/squirt out from underneath the head. Overall length: 1.152" Length (beneath washer to tip): .845" Length (beneath screw head to tip): .958" Length (first thread to tip): .345" Diameter across threads: .210" Head size: 5/16" Diameter of washer: .505" Thickness of washer: .118" Drill point: #3, forged Material: Hardened Steel Package weight: One lot: 2 pounds Two lots: 3 pounds Three lots: 4 pounds Four lots: 6 pounds Five lots: 7 pounds Six lots: 8 pounds Seven lots: 9 pounds
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
Go To Store
|
|
Self Tapping Screws are designed to advance when turned, cr
... Read more
Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade. The first two digits indicate the primary materials used to form the steel. The last 2 digits identify the percentage of carbon for the alloy (in hundredths). The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch). Zinc Plating helps to prevent corrosion.Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material.
Minimize
Get free shipping on orders over $25!
In stock
|
|
Go To Store
|
|
Truss Head Self-Drilling Screws are used to secure single-p
... Read more
Truss Head Self-Drilling Screws are used to secure single-ply membranes through insulation to steel purlins.
Minimize
Great prices on over 50,000 boating & building items. Fast shipping.
In stock
|
This store is not yet rated
|
Go To Store
|
