> Building Supplies > drill/store build com

Use our Trave Aluminum Brackets with one of our Wing Glass ... Read more

Use our Trave Aluminum Brackets with one of our Wing Glass or Aluminum Shelves to create a stunning display for your home or office. A 5/16" drill bit (sold separately, listed below) is recommended for installation.||Accommodates shelves up to 12" deep and 3/4" thick | Supports up to 55 pounds | Brackets should be no more than 24" apart | Mounting hardware and instructions are included Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #12, Length 1 In, Driver Size 5/16 In, Width Of Hex Head 0.305 In, Head Height 0.139 In, Washer Dia 0.398 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal Up To 5 Gauge, Meets/exceeds Sae J78, Package 100 Minimize

100 Self Drilling Sheet Metal Screws. These screws are appr ... Read more

100 Self Drilling Sheet Metal Screws. These screws are approx. 1/2 long and are a 8 size with a Hex drive. The screws are great for fixturing in patch panels prior to welding.100pc Self Drilling Screws (1/2 Hex) 100 Self Drilling Sheet Metal Screws. These screws are approx. 1/2 long and are a 8 size with a Hex drive. The screws are great for fixturing in patch panels prior to welding. Includes 100 Self Drilling Screws (8, Head Head, 1/2 Length) Use for drilling in sheet metal when doing plug welds for patch panels. Always wear eye, face, hand, and body protection when using a drill. 060717403235 13602 F10022 self drilling drill tap tapping screw bolt sheet metal 1/2 Hex screws Minimize

HAWA Junior Collection 2" Pre-Drilled Aluminum Bottom / Wal ... Read more

HAWA Junior Collection 2" Pre-Drilled Aluminum Bottom / Wall Glass Retainer PieceComplete your top hung sliding door system with this lower door guide. This bottom guide will ensure that the bottom of the door is secure as it slides, preventing swinging.The HAWA Junior GP Series is for 1 or 2 sliding glass doors, and features maintenance-free smooth, quiet operation and simple installation as well as low installation height. No glass cut-outs are required and vertical adjustments can be made without removing the glass door. When using two sliding doors on the same track, make sure they do not collide by using a lower guide channel with a door stopper or protective edge trim.Features:2" (50 mm) LengthSimple installationFor bottom/wall installationPre-drilledRattle-freeMade of clear, anodized aluminumHafele is committed to finding better ways and it shows in their innovative and beautiful line of door hardware products. These products will lead to better organization and the peace of mind that comes with Hafele brand products. In addition to quality and beauty, Hafele is committed to reducing their environmental impact, so you can buy these products with confidence in every aspect. Minimize

Product Features: Keyed alike - same key opens ... Read more

Product Features: Keyed alike - same key opens both locks Commercial grade padlock features superior protection from drilling and prying 2" (51mm) wide laminated steel body for superior strength 1" (25mm) tall 3/8" (10mm) diameter hardened boron alloy shackle for superior cut resistance Dual locking levers provide extra pry resistance Non-rekeyable 4-pin W1 cylinder helps prevent picking Best Used For: Industrial Storefront Business Gates Tool Cribs Construction Sites Equipment Job Boxes Gang Boxes Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #10, Length 1 In, Driver Size 5/16 In, Width Of Hex Head 0.305 In, Head Height 0.105 In, Washer Dia 0.384 In, Drill Point Size #3, Drill Point Length 0.300 In, For Attaching Variety Of Materials To Metal Up To 7 Gauge, Meets/exceeds Sae J78, Package 100 Minimize

Self Tapping Screws are designed to advance when turned, cr ... Read more

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.Flat head fasteners are designed to fit flush to the surface when used with countersunk holes. Length is measured from the top of the head. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. Minimize

Supports Drilled Shelves Requires 3/8" (10 mm) Hole in Glas ... Read more

Supports Drilled Shelves Requires 3/8" (10 mm) Hole in Glass CRL's Satin Chrome Drill-Thru Support is designed to hold shelves in a horizontal fixed position and is used in single shelf applications. The Drill-Thru Support requires a 3/8 inch (10 millimeter) drilled hole in the glass, is easily adjusted to the desired height on the Rod, and then locked into place by tightening the set screw in the Support. The maximum recommended weight capacity is 25 pounds (11.3 kilograms). Minimize

HAWA Junior Collection 2" Pre-Drilled Aluminum Bottom / Wal ... Read more

HAWA Junior Collection 2" Pre-Drilled Aluminum Bottom / Wall Glass Retainer PieceComplete your top hung sliding door system with this lower door guide. This bottom guide will ensure that the bottom of the door is secure as it slides, preventing swinging.The HAWA Junior GP Series is for 1 or 2 sliding glass doors, and features maintenance-free smooth, quiet operation and simple installation as well as low installation height. No glass cut-outs are required and vertical adjustments can be made without removing the glass door. When using two sliding doors on the same track, make sure they do not collide by using a lower guide channel with a door stopper or protective edge trim.Features:2" (50 mm) LengthSimple installationFor bottom/wall installationPre-drilledRattle-freeMade of clear, anodized aluminumHafele is committed to finding better ways and it shows in their innovative and beautiful line of door hardware products. These products will lead to better organization and the peace of mind that comes with Hafele brand products. In addition to quality and beauty, Hafele is committed to reducing their environmental impact, so you can buy these products with confidence in every aspect. Minimize

1/4-20 x 3 3/4 Phillips Flat with Wings Self Drill Screw WA ... Read more

1/4-20 x 3 3/4 Phillips Flat with Wings Self Drill Screw WAR Coated - Phillips flat head tapping screw , spaced or unified threads, and a #3 or #4 drill point. Designed to drill through steel to attach wood to metal. AISI 1022 or equivalent steel. Rockwell C50-56. Meets F.I.P.-1000.7 for torsional strength & drill speed. Meets ASTM A 510 for carbon steel manufacturing. Exceeds 1,000/hr. salt spray resistance. Designed to work with ACQ treated lumber. Highly corrosion resistant. Minimize

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex ... Read more

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #14, Length 2 In, Width Of Hex Head 0.375 In, Head Height 0.190 In, Washer Od 0.520 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100 Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #8, Length 5/8 In, Drive Type Hex, Driver Size 1/4 In, Width Of Hex Head 0.250 In, Head Height 0.096 In, Washer O 0.272 In Washer O, Drill Point Size #2, Drill Point Length 0.211 In, For Attaching Variety Of Materials To Metal Up To 12 Gauge, Meets/exceeds Sae J78, Package 1310 Minimize

Use our Pelicani Aluminum Brackets with one of our Wing Gla ... Read more

Use our Pelicani Aluminum Brackets with one of our Wing Glass or Aluminum Shelves to create a stunning display for your home or office. A 5/16" drill bit (sold separately, listed below) is recommended for installation.||Accommodates shelves up to 12" deep and 1" thick | Supports up to 66 pounds | Brackets should be no more than 24" apart | Mounting hardware and instructions are included Minimize

Also known as: RFX-7121100, RFX7121100; Features and Benefi ... Read more

Also known as: RFX-7121100, RFX7121100; Features and Benefits: High strength bond in seconds Will not dry out in container Bonds to a wide range of materials, including mixed materials like copper to plastic pipe Holes, gaps or splits can be drilled, tapped, ground, sanded and painted Dries clear Pack contains 1 x RapidFix Adhesive, 1 x RapidFix Welding Powder and Instruction sheet. The pack includes a demonstration CD video for the customer. This video in included with the counter display. The RapidFix Dual Adhesive System is a professional grade adhesive. It can bond Rubber, Copper, Steel Aluminum and most plastics. It can also bond many mixed materials, like copper to Plastic, Rubber to Steel. The RapidFix Welding Powder extends the products application providing the ability to fill holes, splits and gaps in many materials. It can also produce a strong weld seam to support the repair, similar to a welded or soldered joint. After welding it can be drilled, tapped, sanded and painted. The RapidFix Dual Adhesive System has many automotive applications that can save the mechanic time and money. Minimize

HAWA Collection 6 7" Pre-Drilled Upper Track for Top Hung ... Read more

HAWA Collection 6 7" Pre-Drilled Upper Track for Top Hung Wood Sliding Door SystemCreate a versatile sliding door system with this pre-drilled upper track for a top hung system. This track is made of clear, anodized aluminum and provides the support for the door.The HAWA Dorado Infront Series is designed for by-passing cabinet or closet sliding doors. It can be used with multiple door layouts, features all 1-3/8" drilling, smooth operation, simple installation, vertical adjustment, and door stop with adjustable retention spring. It works with doors from 3/4" to 1-3/8" thick and up to 88 lbs.Features:6 6.75" (2 m) LengthPre-drilledMade of clear, anodized aluminumSmooth operation and simple installationVertical adjustmentMultiple door layoutsUp to 88 lbs. per door3/4" - 1-3/8" door thicknessDoor overlap minimum 1.06"Hafele is committed to finding better ways and it shows in their innovative and beautiful line of door hardware products. These products will lead to better organization and the peace of mind that comes with Hafele brand products. In addition to quality and beauty, Hafele is committed to reducing their environmental impact, so you can buy these products with confidence in every aspect. Minimize

Self Tapping Screws are designed to advance when turned, cr ... Read more

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. Minimize

HAWA Junior Collection 2" Pre-Drilled Aluminum Bottom / Wal ... Read more

HAWA Junior Collection 2" Pre-Drilled Aluminum Bottom / Wall Glass Retainer PieceComplete your top hung sliding door system with this lower door guide. This bottom guide will ensure that the bottom of the door is secure as it slides, preventing swinging.The HAWA Junior GP Series is for 1 or 2 sliding glass doors, and features maintenance-free smooth, quiet operation and simple installation as well as low installation height. No glass cut-outs are required and vertical adjustments can be made without removing the glass door. When using two sliding doors on the same track, make sure they do not collide by using a lower guide channel with a door stopper or protective edge trim.Features:2" (50 mm) LengthSimple installationFor bottom/wall installationPre-drilledRattle-freeMade of clear, anodized aluminumHafele is committed to finding better ways and it shows in their innovative and beautiful line of door hardware products. These products will lead to better organization and the peace of mind that comes with Hafele brand products. In addition to quality and beauty, Hafele is committed to reducing their environmental impact, so you can buy these products with confidence in every aspect. Minimize

1/4-20 x 2 3/4 Phillips Flat with Wings Self Drill Screw WA ... Read more

1/4-20 x 2 3/4 Phillips Flat with Wings Self Drill Screw WAR Coated - Phillips flat head tapping screw , spaced or unified threads, and a #3 or #4 drill point. Designed to drill through steel to attach wood to metal. AISI 1022 or equivalent steel. Rockwell C50-56. Meets F.I.P.-1000.7 for torsional strength & drill speed. Meets ASTM A 510 for carbon steel manufacturing. Exceeds 1,000/hr. salt spray resistance. Designed to work with ACQ treated lumber. Highly corrosion resistant. Minimize

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex ... Read more

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size #14, Length 1 In, Width Of Hex Head 0.375 In, Head Height 0.190 In, Washer Od 0.520 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100 Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel With Neoprene Washer, Zinc Finish, Size 1/4 In, Length 2 In, Driver Size 3/8 In, Width Of Hex Head 0.367 In, Head Height 0.172 In, Washer Dia 0.480 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal Up To 3 Gauge, Meets/exceeds Sae J78, Package 100 Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainles ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Stainless Steel, Plain Finish, Size #12, Length 1 1/2 In, Driver Size 5/16 In, Width Of Hex Head 0.305 In, Head Height 0.139 In, Washer Dia 0.398 In, Drill Point Size #3, Drill Point Length 0.353 In, For Attaching Variety Of Materials To Metal Up To 5 Gauge, Meets/exceeds Sae J78, Package 50 Minimize

HAWA Collection 7 3" Pre-Drilled Upper Track for Top Hung ... Read more

HAWA Collection 7 3" Pre-Drilled Upper Track for Top Hung Wood Sliding Door SystemCreate a versatile sliding door system with this upper track for a top hung system. This track provides the support for the door and is designed for a single wood door.The HAWA Junior 80/Z Series is designed for 1 or 2 sliding wood doors. It features smooth, quiet operation, outstanding durability, rattle-free operation, and simple installation. The HAWA Junior 80/Z Series is special because it uses two-way suspension, is vertically and laterally adjustable and includes a door stop with adjustable retention spring. This series supports doors up to 176 lbs. that are at least 1" thick.Features:4 7.125" (1.4 m) LengthPre-drilledMade of clear, anodized aluminumOutstanding durabilitySmooth, quiet operationMaximum 176 lb. door weightMinimum door thickness of 1"Hafele is committed to finding better ways and it shows in their innovative and beautiful line of door hardware products. These products will lead to better organization and the peace of mind that comes with Hafele brand products. In addition to quality and beauty, Hafele is committed to reducing their environmental impact, so you can buy these products with confidence in every aspect. Minimize

Self Tapping Screws are designed to advance when turned, cr ... Read more

Self Tapping Screws are designed to advance when turned, creating their own threads in the material. They are often used in sheet metal and plastic. Steels are designated by a 4 number SAE Steel grade.  The first two digits indicate the primary materials used to form the steel.  The last 2 digits identify the percentage of carbon for the alloy (in hundredths).  The steel used in these fasteners has a tensile strength ranging from 100,000 to 150,000 psi (pounds per square inch).  Zinc Plating helps to prevent corrosion.Pan head fasteners have a low, large cylindrical head with a high rounded top edge for higher tightening torques - these fasteners are often recommended to replace older head styles such as round, binding, or truss-head where possible. The Phillips drive style was originally designed so that the driver would slip out under extreme torque, preventing over-tightening and damage to the fastener or the material. Minimize

CRL Chrome No-Drill Showcase Lock This CRL No-Drill Showcas ... Read more

CRL Chrome No-Drill Showcase Lock This CRL No-Drill Showcase Lock is designed for swinging glass doors, and is easily installed by peeling off the adhesive liner and placing the Lock and Receiver in the desired location on the glass. No drilling or notching of glass is required. The No-Drill Lock can be used on any thickness of glass door or showcase. Available in several different finishes to match popular showcase extrusions. Can be ordered keyed randomly or alike. Quick and Easy-to-Install A Minimize

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-har ... Read more

Self Drilling Screw, Sheet Metal, Hex Washer Head, Case-hardened Steel With Neoprene Washer, Zinc Finish, Size 1/4 In, Length 1 In, Driver Size 3/8 In, Width Of Hex Head 0.367 In, Head Height 0.172 In, Washer Dia 0.480 In, Drill Point Size #3, Drill Point Length 0.393 In, For Attaching Variety Of Materials To Metal Up To 3 Gauge, Meets/exceeds Sae J78, Package 100 Minimize

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex ... Read more

Self Drilling Screw, Sheet Metal With Neoprene Washer, Hex Washer Head, Case-hardened Steel, Zinc Finish, Size 10-16, Length 1 In, Width Of Hex Head 0.312 In, Head Height 0.120 In, Washer Od 0.414 In, Drill Point Size #3, Drill Point Length 0.300 In, For Attaching Variety Of Materials To Metal, Meets/exceeds Sae J78, Package 100 Minimize

RichelieuUniversalMortise Edge PullCenter to Center - 64 mm ... Read more

RichelieuUniversalMortise Edge PullCenter to Center - 64 mm (2 33/64 in) Also Available In 96 mmScrew/Nailed - Recessed & gluedWe Recommend That You Use a 7.5mm Drill Bit (product no. AT606130) as Well as a Polyurethane Glue (product no. 56911) In Order To Properly Fix The Pull Into Place. Minimize

This solid steel Cobalt RC-01 Depository Safe features 3/8- ... Read more

This solid steel Cobalt RC-01 Depository Safe features 3/8-inch thick door and 3/16-inch thick body with 2.25-inch total door thickness. It has drill resistant hard plate, interlocking steel plate on hinge side of the door, spring loaded active relocker bolt, and four pre-drilled mounting holes. The safe also features 18 inch bottom to hopper clearance inside and three 0.75-inch active chrome plated solid steel locking bolts. This safe is available in different lock style options. MPN - RC-01 Minimize