> Building Supplies > CRL > Door Bottoms

CRL Adjustable End-Load Floor Mount Bottom Pivot Set This C ... Read more

CRL Adjustable End-Load Floor Mount Bottom Pivot Set This CRL Door-On Adjustable Bottom Pivot Set is intended for use with end-load applications, and can be used with bottom door rails with a minimum of 1" (25 mm) depth. This Pivot allows the door clearance to be adjusted from 1/4" to 1/2" (6 to 12 mm) with the door installed. Maximum weight capacity is 200 lbs. (90.7 kg). Adjustable without Removing the Door Bottom Clearance Adjustable From 1/4" to 1/2" (6 to 12 mm) For Use with End-Load Arm Applications NOTE Cannot be used with CRL Low Profile Door Rails. Catalog Number: CRL8010ADJ Also Available in These Catalogs: CRL83 Master Window and Door Catalog, PAGE W556 CRL63A Architectural Hardware Master Catalog, PAGE 462H AH11 Architectural Hardware Catalog 2011, PAGE Z692 Minimize

C.R. LAURENCE N6543 CRL Bi-Fold Door Bottom Pivot Bracket f ... Read more

C.R. LAURENCE N6543 CRL Bi-Fold Door Bottom Pivot Bracket for Acme. This CRL Pivot Bracket is an adjustable, stamped steel bracket with a self lubricating nylon bushing which is mounted onto the floor and jamb. The pivot bracket can be used on doors from one to 1-3/8 inches (25.4 to 34.9 millimeters) thick and up to 50 pounds (22.7 kilograms). It fits on Acme doors.. Part Numbers Variations: N6543 Minimize

Used on Croft Series 701 & 702 Doors Made of rigid vinyl, t ... Read more

Used on Croft Series 701 & 702 Doors Made of rigid vinyl, this CRL Bottom Guide is used on Croft series 701 and 702 doors. Minimum Order: 1 Package Two guides with installation screws per package. Minimize

Used by Peachtree Doors The CRL Bottom Roller assembly has ... Read more

Used by Peachtree Doors The CRL Bottom Roller assembly has a 7/16 inch (11.1 millimeter) wide nylon housing that has a one inch (25.4 millimeter) O.D., center grooved steel ball bearing wheel. The roller is used on Peachtree doors. Minimum Order: 1 Package Two roller assemblies with installation screws per package. Minimize

Used by Many Door Manufactures This CRL Sliding Screen Door ... Read more

Used by Many Door Manufactures This CRL Sliding Screen Door Bottom Roller has an 11/32 inch (8.7 millimeter) aluminum housing with a stainless steel spring. It has a built-in screw adjustment feature and a 1/4 inch (6.4 millimeter) wide nylon wheel with a center groove. Minimum Order: 1 Package Two roller assemblies with installation screws per package. Minimize

This CRL Sliding Screen Door Bottom Roller assembly has a 1 ... Read more

This CRL Sliding Screen Door Bottom Roller assembly has a 13/32" (10.3 mm) wide housing with an adjustable nylon yoke; thicker housing than B691. The screw holes are 1-15/16" (49.2 mm) on center. Two center groove roller assemblies with installation screws per package. Minimize

This CRL Sliding Screen Door Roller has a 5/16 inch (7.9 mi ... Read more

This CRL Sliding Screen Door Roller has a 5/16 inch (7.9 millimeter) wide, spring loaded housing with a center grooved steel wheel and top adjusting screw. It fits on sliding screen doors by Bay-Mills and other manufacturers. Minimize

Nylon Ball Bearing Roller This Sliding Screen Door Bottom R ... Read more

Nylon Ball Bearing Roller This Sliding Screen Door Bottom Roller assembly has a 13/32 inch (10.3 millimeter) wide housing with an adjustable nylon yoke. The screw holes are 1-15/16 inches (49.2 millimeter) on center. Minimum Order: 1 Package Two roller assemblies with installation screws per package. Minimize

Use on Academy Uni-Fit Doors This spring activated Sliding ... Read more

Use on Academy Uni-Fit Doors This spring activated Sliding Screen Door Bottom Roller has a 3/8 inch (9.5 millimeter) wide nylon housing and yoke. The 1/4 inch (6.4 millimeter) wide nylon wheel has a center groove. The unit is used as a top and bottom roller on Academy Uni-fit sliding screen doors. Minimum Order: 1 Package Two roller assemblies with installation screws per package. Minimize

7/16" (11.1 mm) Inside Channel Width This CRL Sliding Tub E ... Read more

7/16" (11.1 mm) Inside Channel Width This CRL Sliding Tub Enclosure Bottom Guide has a 7/16 inch (11.1 millimeter) inside channel width. It fits directly onto the door frame bottom. A normal installation requires two guides per door. Two guides with installation screws per package. Minimize

This CRL Sliding Screen Door Bottom Roller has a nylon hous ... Read more

This CRL Sliding Screen Door Bottom Roller has a nylon housing with a steel spring. The flat nylon wheel has a 5/8 inch (15.9 millimeter) diameter. The roller assembly is used on Weathershield doors. Minimize

Use on Hilite Doors This spring activated Sliding Screen Do ... Read more

Use on Hilite Doors This spring activated Sliding Screen Door Bottom Roller has a 7/16 inch (11.1 millimeter) wide nylon housing with a flat edge nylon wheel. It fits on HiLite doors. Minimum Order: 1 Package Two roller assemblies with installation screws per package. Minimize

Nylon Ball Bearing Roller This Sliding Screen Door Bottom R ... Read more

Nylon Ball Bearing Roller This Sliding Screen Door Bottom Roller Assembly Has A 13/32 Inch (10.3 Millimeter) Wide Housing With An Adjustable Nylon Yoke. The Screw Holes Are 1-15/16 Inches (49.2 Millimeter) On Center. Minimize

7/16" O.D. Base Holds Positive Adjustment This CRL Wardrobe ... Read more

7/16" O.D. Base Holds Positive Adjustment This CRL Wardrobe (Closet) Door Pivot has a 7/16 inch (11.1 millimeter) diameter nylon base housing and uses a hex head bolt for quick vertical adjustment. This pivot fits on bi-fold doors one to 1-3/8 inches (25.4 to 34.9 millimeter) thick, and up to 30 pounds (13.6 kilograms) each. Minimum Order: 1 Package Two pivots per package. Minimize

Used on Columbia Doors This Sliding Screen Door Bottom Roll ... Read more

Used on Columbia Doors This Sliding Screen Door Bottom Roller assembly has an aluminum frame with a nylon inner housing. It has an adjustable 1/4 inch (6.4 millimeter) wide ball bearing wheel with a center groove and is used as a top and bottom roller on Columbia doors. Two roller assemblies and installation screws per package. Minimum Order: 1 Package Minimize

C.R. LAURENCE DB019AV36 CRL Aluminum Residential Automatic ... Read more

C.R. LAURENCE DB019AV36 CRL Aluminum Residential Automatic Door Sweep for 36" Door. This CRL Residential Automatic Door Sweep is a spring-loaded, door bottom sweep that retracts up and away from the face of the door when door is opened. When the door is closed, the supplied cam lowers the Sweep. The gap at the door base and threshold is now sealed to prevent dust, moisture, and drafts from entering. Ideal for use where carpeted interiors require the Door Sweep to lift "up and away" from the carpet. Installation screws are included.. Part Numbers Variations: DB019AV36 Minimize

C.R. LAURENCE B663 CRL 1" Steel Ball Bearing Sliding Screen ... Read more

C.R. LAURENCE B663 CRL 1" Steel Ball Bearing Sliding Screen Door Bottom Roller . This CRL Sliding Screen Door Roller is one inch (25.4 millimeter) O.D. and 3/8 inch (9.5 millimeter) wide. It has an adjustable diecast mounting bracket with a stamped steel housing. One left and right hand per package.. Minimize

Sweep, Door Bottom, Neoprene This CRL 36" (914 mm) Aluminum ... Read more

Sweep, Door Bottom, Neoprene This CRL 36" (914 mm) Aluminum Door Bottom has a stiff Neoprene black sweep to create a good seal with the door sill or threshold. Aluminum with mill finish and supplied with mounting screws. Minimize

C.R. LAURENCE B617 CRL 1" Steel Ball Bearing Sliding Screen ... Read more

C.R. LAURENCE B617 CRL 1" Steel Ball Bearing Sliding Screen Door Bottom Roller for Columbia Doors. This CRL Sliding Screen Door Bottom Roller assembly has an aluminum frame with a nylon inner housing. It has a 1/4 inch (6.4 millimeter) wide, adjustable wheel with a center groove and can be used as a top and bottom roller on Columbia doors. Two roller assemblies and installation screws per package.. Minimize