> Auto Parts and Accessories > maximum auto parts > Universal > Pegasus Auto Racing Supplies

Maximum pressure 2.75-4.0 psi. Maximum flow 34 gallons per ... Read more

Maximum pressure 2.75-4.0 psi. Maximum flow 34 gallons per hour. Typical applications flow 10 GPH at 2 psi. (This is the lowest-pressure Cylindrical style pump available.) 1/8 NPT female ports. Negative ground (12v) only. The Facet “Interruptor” pumps now feature reliable solid-state technology instead of points! Same function, same packaging, and same operation, but much greater reliability. This pump was originally used on many Onan brand RV generators. Note that not all generators use this pump! We may be able to determine which pump you need if you can give us the Facet part number on your pump. This pump is Facet part number 477060 (E). Supercedes 480513 (E) and 480544 (E). The Facet part number is a 5- to 7-digit stamped on the mounting flange (usually 2 or 3 digits on either side of the mounting bolt hole). We can usually cross-reference your part number to one of our pumps. How to Find the Part Number on a Facet Fuel Pump Minimize

Maximum fuel delivery 36 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 36 gallons per hour. Maximum pressure 4 to 5 psi. Typical flow 23 gallons per hour at 2 psi. 1/8 NPT female ports. Negative ground (12v) only. For higher fuel volume requirements of engines above about 150 horsepower, the high-performance Facet Cylindrical pumps can deliver. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pump number 476087 (E). This pump can also replace Facet pump number 476410 (E), 478360 (E), 480516 (E)*, and 480591 (E)*. Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. * Facet pumps 480516 (E) and 480591 (E) each had special connectors on the positive wire, which this pump does not. All other specifications are the same. Minimize

Maximum fuel delivery 32 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 32 gallons per hour. Maximum pressure 6 to 8.5 psi. Typical flow 20 gallons per hour at 3 psi. 1/8 NPT female ports. Negative ground (12v) only. This pump can also replace Facet pump number 480541. For higher fuel volume requirements of engines above about 150 horsepower, the high-performance Facet Cylindrical pumps can deliver. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 32 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 32 gallons per hour. Maximum pressure 4 to 6 psi. Typical flow 15 gallons per hour at 3 psi. 6AN male ports for easy hookup to -6 stainless braided racing hose. For moderate fuel requirements of engines up to about 150 horsepower, a single Solid State fuel pump is usually sufficient. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pump number 40108. Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 36 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 36 gallons per hour. Maximum pressure 4 to 5 psi. Typical flow 23 gallons per hour at 2 psi. 1/8 NPT female ports. Negative ground (12v) only. This pump features an anti-siphon valve. For higher fuel volume requirements of engines above about 150 horsepower, the high-performance Facet Cylindrical pumps can deliver. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 34 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 34 gallons per hour. Maximum pressure 4 to 5 psi. Typical flow 23 gallons per hour at 2 psi. 1/8 NPT female ports. Negative ground (12v) only. This pump features an anti-siphon valve and does not have an internal filter. Also features a unique offset mount (see photo). Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. This pump was standard equipment on some models of Onan RV generators. The built-in anti-siphon valve makes it ideal for applications where the generator is mounted some distance from the fuel tank. Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 32 gallons per hour at free-flow. Ma ... Read more

Maximum fuel delivery 32 gallons per hour at free-flow. Maximum pressure 9 to 11.5 psi. Typical flow 15 gph at 5 psi. 1/8 NPT female ports. Ground wire allows easy installation in positive-ground applications (most Facet pumps ground through the pump body). For low fuel requirements on engines up to about 150 horsepower, a single Solid State pump such as this one is usually sufficient. Pumps can be combined in series or parallel to achieve higher pressures or flows. We also offer several other models with different flow rates and pressures for engines up to about 150 horsepower. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 15 gallons per hour at free-flow. Ma ... Read more

Maximum fuel delivery 15 gallons per hour at free-flow. Maximum pressure 3.5 to 5 psi. Typical flow 7 gph at 1.5 psi. 1/8 NPT female ports. Ground wire allows easy installation in positive-ground applications (most Facet pumps ground through the pump body). For low fuel requirements on engines up to about 150 horsepower, a single Solid State pump such as this one is usually sufficient. Pumps can be combined in series or parallel to achieve higher pressures or flows. We also offer several other models with different flow rates and pressures for engines up to about 150 horsepower. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 34 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 34 gallons per hour. Maximum pressure 2.75 to 4 psi. Typical flow 20 gallons per hour at 1.5 psi. 1/8 NPT female ports. Negative ground (12v) only. This pump can also replace Facet pump number 40078. For higher fuel volume requirements of engines up to about 200 horsepower, the high-performance Facet Cylindrical pumps can deliver. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 36 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 36 gallons per hour. Maximum pressure 4 to 5 psi. Typical flow 23 gallons per hour at 2 psi. 1/4 NPT female ports. Negative ground (12v) only. This pump does not have an anti-siphon valve. This pump can also replace Facet pump number 40220. For higher fuel volume requirements of engines above about 150 horsepower, the high-performance Facet Cylindrical pumps can deliver. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 45 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 45 gallons per hour. Maximum pressure 6 to 8 psi. Typical flow 30 gallons per hour at 2 psi. 1/4 NPT female ports. Negative ground (12v) only. For higher fuel volume requirements of engines up to 300 horsepower, the high-performance Facet Cylindrical pumps can deliver. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 45 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 45 gallons per hour. Maximum pressure 6.5 to 7.5 psi. Typical flow 35 gallons per hour at 2 psi. 1/4 NPT female ports. Negative ground (12v) only. This pump can also replace Facet pump number 480543. For higher fuel volume requirements of engines above about 150 horsepower, the high-performance Facet Cylindrical pumps can deliver. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pump number 480534 (E). Note: The Facet “Interruptor” style pumps now feature reliable solid-state technology instead of points! Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

The MyChron3 Gold Auto Dash shares the same features as the ... Read more

The MyChron3 Gold Auto Dash shares the same features as the MyChron3 Plus Auto Dash but includes one more temp sensor, an internal lateral g sensor for track mapping, and much more memory (8MB). For a simple and easy to use data logging dash system, nothing beats AiM. The AiM MyChron3 Gold easily installs to any panel with four vibration mounting studs built right into the unit. The wide, easy-to-read backlit display is housed in a compact 4.88" wide by 3.62" tall package. Up to 3 hours of very precise and accurate data logging can be replayed on the dash itself or downloaded to your computer with the included Race Studio 2 software kit. MyChron3 Gold Auto Dash features: Digital (numeric and graphic) RPM display with configurable scaling LED Gear indicator 10 Fully configurable shift lights 4 Alarm LEDs 4 Analog input channels (includes 2 temp sensors) Wheel speed (includes magnetic sensor) Resettable odometer Internal lateral G sensor Infra-red lap timer (includes transmitter & receiver) 8MB Recall memory Kit includes MyChron3 Gold dash with built-in data logger and lateral G sensor, wiring harness with 26 pin MS connector, infrared transmitter and receiver, rpm sensor, wheel speed sensor, two temperature sensors, and the USB download cable and Race Studio 2 software. Requires 9 - 15V external power supply. Customers outside North America please note: We are only able to ship AiM products to addresses within North America (USA, Canada, and Mexico). Minimize

For a simple and easy to use data logging dash system, noth ... Read more

For a simple and easy to use data logging dash system, nothing beats AiM. The AiM MyChron3 Plus easily installs to any panel with four vibration mounting studs built right into the unit. The wide, easy-to-read backlit display is housed in a compact 4.88" wide by 3.62" tall package. Over 1 hour of very precise and accurate data logging can be replayed on the dash itself or downloaded to your computer with the included Race Studio 2 software kit. MyChron3 Plus Auto Dash features: Digital (numeric and graphic) RPM display with configurable scaling LED Gear indicator 10 Fully configurable shift lights 4 Alarm LEDs 4 Analog input channels (includes 1 temp sensor) Wheel speed (includes magnetic sensor) Resettable odometer Infra-red lap timer (includes transmitter & receiver) 512k Recall memory Kit includes MyChron3 Plus dash with built-in data logger, wiring harness with 26 pin MS connector, rpm sensor, infrared transmitter and receiver, one temperature sensor, wheel speed sensor, USB download cable, and Race Studio 2 software. Requires 9 - 15V external power supply. Customers outside North America please note: We are only able to ship AiM products to addresses within North America (USA, Canada, and Mexico). Minimize

This polyurethane foam kit produces a rigid foam with a den ... Read more

This polyurethane foam kit produces a rigid foam with a density of about two pounds per cubic foot. It is ideal for making custom fitted seats or for strengthening composite bodywork parts. When the two parts are mixed, they begin to react within about one minute. Most of the foaming occurs within the next several minutes. About 15 minutes is required for the foam to set. Allow several hours before any secondary operations are attempted such as sanding or carving (if required). The resulting foam will not absorb water and is not affected by polyester resin, epoxy resin, gasoline or oil. The compressive strength of the foam is 36 psi. It can withstand operating temperatures of up to 200 degrees F. One kit is enough for about 3 typical formula car seat inserts. Click here for an instructional article about Custom Fit Seat Inserts, including full instructions for this kit. Minimize

Maximum fuel delivery 30 gallons per hour at free-flow. Ma ... Read more

Maximum fuel delivery 30 gallons per hour at free-flow. Maximum pressure 3 to 4.5 psi. Typical flow 15 gph at 2 psi. 1/8 NPT female ports. Ground wire allows easy installation in positive-ground applications (most Facet pumps ground through the pump body). This pump can also replace Facet pump number 40136. For low fuel requirements on engines up to about 150 horsepower, a single Solid State pump such as this one is usually sufficient. Pumps can be combined in series or parallel to achieve higher pressures or flows. We also offer several other models with different flow rates and pressures for engines up to about 150 horsepower. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 32 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 32 gallons per hour. Maximum pressure 4 to 7 psi. Typical flow 15 gallons per hour at 3 psi. 1/8 NPT female ports. For moderate fuel requirements of engines up to about 150 horsepower, a single Solid State fuel pump is usually sufficient. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pump number 40106. Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

Maximum fuel delivery 28 gallons per hour. Maximum pressur ... Read more

Maximum fuel delivery 28 gallons per hour. Maximum pressure 2.5 to 4.5 psi. Typical flow 15 gallons per hour at 1 psi. 1/8 NPT female ports. For moderate fuel requirements of engines up to about 150 horsepower, a single Solid State fuel pump is usually sufficient. Pumps can also be combined in series or parallel to achieve any required pressure or flow. Facet fuel pumps have low power requirements (about 1 amp at 12 volts) and operate without troublesome seals or diaphragms. Built-in pressure relief means no flooding after shutting down a hot engine. Facet pump number 40104. Not sure if this is the pump you need? Check out our article on Finding the Part Number on Facet Fuel Pumps. Minimize

MyChron Race Studio 2 Software lets you analyze the data fr ... Read more

MyChron Race Studio 2 Software lets you analyze the data from your MyChron3 dash in an organized and highly professional way. Your data can be analyzed in several different styles thanks to graphs, histograms, comparisons between lap data and test data, and time comparison tables. Many calculation features are available like math channels and power and torque calculators. Each download kit comes complete with the Race Studio 2 software CD and the USB download cable with a male 4-pin 719 push-on connector. Compatible with Windows 98 SE, 2000, ME, and XP and functions in several different languages: English, Italian, German, French, Spanish, Dutch, Portugese, Finnish, and Japanese. This kit is compatible with: AiM MyChron3 Plus or MyChron3 Extreme kart dashes AiM MyChron3 Plus, Gold, and XG-Log auto dashes AiM EVO3 Pista and Pro data loggers Note that the EVO3 series data loggers can also use the Memory Key Download Tool (Part No. MC-315) rather than a USB cord for data transfer. We also offer the MyChron3 Basic Download Kit (for the MyChron3 Basic kart dash) and the MXL Download Kit (for the MXL series dashes). Minimize

This digital speedometer is small enough (2 3/4" x 1 3/16" ... Read more

This digital speedometer is small enough (2 3/4" x 1 3/16" x 1") and light enough (7 oz) to add digital accuracy and reliability to just about any vehicle. Simply install the Hall effect sensor near an axle or wheel hub, install the magnet on the axle or hub, and program the diameter of your tire. Features an odometer function, maximum speed recall, and a programmable acceleration timer for 0-60 MPH, 30-50 MPH, and more! Easy programming menu has options to set tire diameter (0.1 to 4 meters / 4" to 13 feet), set pulses per revolution (1 to 40), select units (MPH or Km/H), and switch backlight color. Also features low battery warning, 52 "snapshot" memories, and a display reading to 999 (MPH or Km/H). Kit comes complete with Hall effect sensor, axle magnet, and detailed instructions. Operates on 8 to 16VDC. Dimensions (SAE): 2" wide (2 3/4" including mount tabs) x 1 3/16" high x 1" deep Dimensions (metric): 50mm wide (70mm including mounting tabs) x 30mm x 25mm deep Weight with sensor, cables, etc: 6.7 oz / 190g Replacement Trigger Magnets (Part No. SP RP-MPU002) are also available separately. SPA Digital Speedometer Instruction Manual Minimize

The Longacre Toe Gauge is a simple, inexpensive, yet accura ... Read more

The Longacre Toe Gauge is a simple, inexpensive, yet accurate way to measure toe-in/toe-out. It's even easy for one person to use alone. Simply scribe or mark a reference line around each tire* and line up the two pointers on the gauge with the lines on the rear of the tires. Note the measurement and repeat at the front of the tires. Subtract the front measurement from the rear, and the result is your total toe-in (a negative result indicates toe-out). The pointers are mounted to a telescoping tube with a graduated scale for easy measurements. * The reference line doesn't even have to be centered on the tire, as long as it is parallel to the centerline of the tire. If you spin the tire and see only one line (as opposed to a spiral), you're set! Minimize

This new combination LED light from the makers of the origi ... Read more

This new combination LED light from the makers of the original Ultimate Rain Light (Part #1303) has all the same features and dimensions, but it can fulfill both the rain light and brake light requirements for sports racers! The cluster of 50 very bright LED's can withstand vibration much better than regular incandescent bulbs. The angled body is designed to aim the light up at a 10 degrees angle for optimum visibility by the following driver. A weatherproof connector is furnished which makes it easy to disconnect the light when changing gears or when performing other maintenance. There are provisions for three mounting bolts for maximum security. This very complete kit includes the rain light assembly with waterproof connector, the cable with mating connector and current limiting resistor, a mounting gasket, mounting hardware, template and instructions. The diameter is 2.1 inches not including the mounting ears. Not DOT approved for street use. Minimize

Although this beaded seat is similar to other kits on the m ... Read more

Although this beaded seat is similar to other kits on the market (the basic component is a vacuum bag full of beads), the beads in this kit are composed of single-impact Creafoam™, a material that provides far superior protection in the event of an impact. Unlike other beaded seat kits, the beads in this kit are not all the same size. Smaller beads in this kit fill the small gaps and voids left between the larger beads for a stronger finished product. Each kit also includes more raw materials than most other kits -- and at a lower price! Used extensively by professional drivers in ChampCar, IRL, IMSA, FIA/LeMans, and NASCAR. Two-part resin (included) is added to the bag of beads, and as the driver sits against the bag, the air is pulled out of the bag with your shop vacuum cleaner. The bag conforms to the shape of the driver, creating a custom-fitted insert. Now available in six sizes: Kart (5 Gallons, 24" x 36" bag) for karting seats or small (lumbar) pads Extra Small (5 Gallons, 48" x 60" bag) for backrests or other partial pads in existing seat shells or sedan-type seats Small (10 gallons, 48'' x 60" bag) for larger drivers in small formula cars, or medium drivers in cars with existing seat shells or racing seats Medium (15 gallons, 60" x 72" bag) for medium to small drivers in small formula cars and D Sports Racers (ideal for F1000) Large (25 gallons, 60" x 72" bag) for medium drivers in cars with no seat shell or smaller drivers in larger cars with existing seat shells X-Large (30 gallons, 60" x 72" bag) for all drivers in large cockpits with no seat shell Each kit includes the bag with Creafoam™ beads, resin, hardener, mixing pail, mixing stick, a roll of gaffer's tape, and full, simple instructions. Creafoam Bead Seat Kit Instructions Minimize

We only stock top-of-the-line Fuel Safe Pro Cell products w ... Read more

We only stock top-of-the-line Fuel Safe Pro Cell products which are designed to exceed the requirements of nearly all sanctioning bodies including: SCCA, IMSA, USAC and NASCAR. These bladders are constructed of ballistic nylon fabric, impregnated and twice coated with fire retardant polyurethane elastomers. This super-tough construction results in a bladder with the following specs: 3540 psi tensile strength, 218 pound tear strength and 245 pound puncture resistance. Aluminum container design varies. "Shoe box" style shown in photograph has a top that slips over the bottom like a shoe box. The mounting straps are usually used to hold the top in place. Some aluminum containers have a bolt flange around the bottom edge. * Note: Dimensions have changed on some cells for 2007. Capacity in Gallons Length Width Height 8 Gallon (Type B) 20.1" 12.1" 8.6" 10 Gallon 25.625" 10.125" 10.125" 12 Gallon * 20.750" 17.875" 9.50" 15 Gallon * 26.00" 17.875" 9.50" 22 Gallon Type A * 34.265" 18.125" 9.50" 22 Gallon Type B * 25.50" 17.125" 13.750" 22 Gallon Type C 25.750" 25.750" 8.50" 25 Gallon 30.60" 17.60" 12.10" 29 Gallon 24.250" 24.250" 12.750" 32 Gallon Type A * 34.50" 17.875" 14.625" 32 Gallon Type B * 26.250" 17.750" 18.50" 44 Gallon 25.750" 25.750" 17.00" Minimize

We only stock top-of-the-line Fuel Safe Pro Cell products w ... Read more

We only stock top-of-the-line Fuel Safe Pro Cell products which are designed to exceed the requirements of nearly all sanctioning bodies including: SCCA, IMSA, USAC and NASCAR. These bladders are constructed of ballistic nylon fabric, impregnated and twice coated with fire retardant polyurethane elastomers. This super-tough construction results in a bladder with the following specs: 3540 psi tensile strength, 218 pound tear strength and 245 pound puncture resistance. Aluminum container design varies. "Shoe box" style shown in photograph has a top that slips over the bottom like a shoe box. The mounting straps are usually used to hold the top in place. Some aluminum containers have a bolt flange around the bottom edge. * Note: Dimensions have changed on some cells for 2007. Capacity in Gallons Length Width Height 8 Gallon (Type B) 20.1" 12.1" 8.6" 10 Gallon 25.625" 10.125" 10.125" 12 Gallon * 20.750" 17.875" 9.50" 15 Gallon * 26.00" 17.875" 9.50" 22 Gallon Type A * 34.265" 18.125" 9.50" 22 Gallon Type B * 25.50" 17.125" 13.750" 22 Gallon Type C 25.750" 25.750" 8.50" 25 Gallon 30.60" 17.60" 12.10" 29 Gallon 24.250" 24.250" 12.750" 32 Gallon Type A * 34.50" 17.875" 14.625" 32 Gallon Type B * 26.250" 17.750" 18.50" 44 Gallon 25.750" 25.750" 17.00" Minimize

We only stock top-of-the-line Fuel Safe Pro Cell products w ... Read more

We only stock top-of-the-line Fuel Safe Pro Cell products which are designed to exceed the requirements of nearly all sanctioning bodies including: SCCA, IMSA, USAC and NASCAR. These bladders are constructed of ballistic nylon fabric, impregnated and twice coated with fire retardant polyurethane elastomers. This super-tough construction results in a bladder with the following specs: 3540 psi tensile strength, 218 pound tear strength and 245 pound puncture resistance. Aluminum container design varies. "Shoe box" style shown in photograph has a top that slips over the bottom like a shoe box. The mounting straps are usually used to hold the top in place. Some aluminum containers have a bolt flange around the bottom edge. * Note: Dimensions have changed on some cells for 2007. Capacity in Gallons Length Width Height 8 Gallon (Type B) 20.1" 12.1" 8.6" 10 Gallon 25.625" 10.125" 10.125" 12 Gallon * 20.750" 17.875" 9.50" 15 Gallon * 26.00" 17.875" 9.50" 22 Gallon Type A * 34.265" 18.125" 9.50" 22 Gallon Type B * 25.50" 17.125" 13.750" 22 Gallon Type C 25.750" 25.750" 8.50" 25 Gallon 30.60" 17.60" 12.10" 29 Gallon 24.250" 24.250" 12.750" 32 Gallon Type A * 34.50" 17.875" 14.625" 32 Gallon Type B * 26.250" 17.750" 18.50" 44 Gallon 25.750" 25.750" 17.00" Minimize

Although this beaded seat is similar to other kits on the m ... Read more

Although this beaded seat is similar to other kits on the market (the basic component is a vacuum bag full of beads), the beads in this kit are composed of single-impact Creafoam™, a material that provides far superior protection in the event of an impact. Unlike other beaded seat kits, the beads in this kit are not all the same size. Smaller beads in this kit fill the small gaps and voids left between the larger beads for a stronger finished product. Each kit also includes more raw materials than most other kits -- and at a lower price! Used extensively by professional drivers in ChampCar, IRL, IMSA, FIA/LeMans, and NASCAR. Two-part resin (included) is added to the bag of beads, and as the driver sits against the bag, the air is pulled out of the bag with your shop vacuum cleaner. The bag conforms to the shape of the driver, creating a custom-fitted insert. Now available in six sizes: Kart (5 Gallons, 24" x 36" bag) for karting seats or small (lumbar) pads Extra Small (5 Gallons, 48" x 60" bag) for backrests or other partial pads in existing seat shells or sedan-type seats Small (10 gallons, 48'' x 60" bag) for larger drivers in small formula cars, or medium drivers in cars with existing seat shells or racing seats Medium (15 gallons, 60" x 72" bag) for medium to small drivers in small formula cars and D Sports Racers (ideal for F1000) Large (25 gallons, 60" x 72" bag) for medium drivers in cars with no seat shell or smaller drivers in larger cars with existing seat shells X-Large (30 gallons, 60" x 72" bag) for all drivers in large cockpits with no seat shell Each kit includes the bag with Creafoam™ beads, resin, hardener, mixing pail, mixing stick, a roll of gaffer's tape, and full, simple instructions. Creafoam Bead Seat Kit Instructions Minimize

The compact Tilton Brake Proportioning Valve allows a drive ... Read more

The compact Tilton Brake Proportioning Valve allows a driver to rapidly select 7 distinct and repeatable settings for brake bias. The maximum reduction of output pressure is approximately 50% of the input pressure. The handle can be oriented in any direction with respect to the base for ease of installation. Complete instructions are included. Note: The 3AN version has 3/8-24 (3AN) female threaded inlet and outlet ports and can be converted to other inlet/outlet sizes using two adapters from our #3265-Size series of 3AN Brake Adapter Fittings. The Metric version has 10x1.0mm Metric flare (bubble flare) ports. If you need any other size or flare type (including 10x1.0mm inverted flare), choose the 3AN version and add two metric adapters from our #3265-Size series of 3AN Brake Adapter Fittings. Minimize

Iridite 14-2 is a chemical process that produces a protecti ... Read more

Iridite 14-2 is a chemical process that produces a protective chromate conversion film on aluminum and aluminum alloys. Application is by dip, brush, swab or spray. Coatings ranging from clear to dark yellow are produced. Darker coatings provide the greatest corrosion protection. The coating can be used as a final finish or can be used as an ideal base for primers, paints, lacquers or for bonding. This 2 pound container of Iridite 14-2 concentrated powder makes up to 42.7 gallons when mixed with water at a rate of 0.75 ounces per gallon of water. You can make a faster-acting solution by increasing the concentration to 1.25 ounces per gallon (makes 25.6 gallons). Iridite 14-2 develops a yellow coating. The color can be used to determine when the desired film thickness has been formed. As the solution becomes depleted with use, the time required to form the coating increases. Additional powder can be added to rejuvenate the solution. A yellow coating can be converted to a clear coating by immersing the part in hot water which will fade the color. Please note that the aluminum surface must be absolutely clean before applying Iridite 14-2. This is usually accomplished with an acid etch. You will know that the surface is sufficiently clean when water completely wets the surface. If water has any tendency to form beads, the surface has not been properly cleaned. Most stores that sell automotive painting supplies carry a chemical for etching aluminum such as PPG DX533 aluminum cleaner. Iridite 14-2 is qualified under Military Specification MIL-DTL-81706B, Class 1A, Form II, Method A, B, C; and under Class C of the same specification. The clear finish also qualifies under Class 3, Form II, Method C of the same specification. WARNING: Iridite 14-2 contains hazardous ingredients. The Material Data Safety Sheet (MSDS) must be read and fully understood before using this product. All appropriate safety measures must be used including the use of rubber or PVC coated gloves, rubber or PVC coated apron and goggles to prevent skin contact with chemicals. Depleted solution must be properly disposed. One method is to allow all the water to evaporate and then to mix the remaining residue with concrete to create a workshop weight (avoid any exposure to dust when mixing the concrete). The resulting concrete weight can come in handy when clamping parts for bonding. Note: Iridite is a trademark of MacDermid Incorporated. Alodine is a trademark of Henkel Technologies. Iridite and Alodine products produce similar protective coatings on aluminum and aluminum alloys and are qualified under many of the same Military Specifications. Note: For industrial use only. Can not be shipped by air. Can not be exported. Detailed instructions for Iridite 14-2 Note: A $27.50 UPS hazardous shipping fee will be applied in addition to the actual cost for shipping. We can only ship this product by ground service to an address in the lower 48 states. The price of this product includes special Department of Transportation Exemption Packaging which allows us to ship this item by UPS. Minimize