> Auto Parts and Accessories > Engine Parts > Ford > Advance Auto Parts

MPN #4558201. Mallory Unilite Distributor for Ford, 2.0L, L ... Read more

MPN #4558201. Mallory Unilite Distributor for Ford, 2.0L, L4, Mechanical Advance. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

MPN #7556701C. Mallory Magnetic Pickup Distributor for Ford ... Read more

MPN #7556701C. Mallory Magnetic Pickup Distributor for Ford, 351C, 351M, 400, 429, 460, Vacuum Advance. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

MPN #2555401. Mallory Dual Point Distributor for Ford 351W ... Read more

MPN #2555401. Mallory Dual Point Distributor for Ford 351W 69-80 DP, Mechanical. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

For Ford enthusiasts that are serious about performance! Ju ... Read more

For Ford enthusiasts that are serious about performance! Just under the brass terminals of the MSD cap and rotor is an easy-to-adjust mechanical advance assembly. This allows for easy tuning, and a maintenance-free magnetic pickup accurately triggers the MSD Ignition. Inside, a sealed ball bearing and lond sintered bushing guides the oversize shaft to provide stable timing signals and spark delivery at any rpm. Requires an MSD Ignition Control (not included). Product Features:Maintenance-free magnetic pickupEasy-to-adjust mechanical advanceDifferent springs and stop bushings are supplied so a variety of advance curves can be tunedNote: Requires an MSD Ignition Control (not included). Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

MPN #2555801. Mallory Dual Point Distributor for Ford, 351W ... Read more

MPN #2555801. Mallory Dual Point Distributor for Ford, 351W. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

The fan clutch is the component of the cooling system that ... Read more

The fan clutch is the component of the cooling system that varies the fan speed to meet the cooling needs of the engine. The fan clutch provides high airflow volume and, by only operating the fan as needed, promotes good fuel economy. Imperial fan clutches are designed to meet OE performance specifications.Product Features:Imperial Premium Fan ClutchSevere dutyDesigned, tested and built by applicationOE performance, fit and appearance. Most Cooling and Heating products are available for in-store pickup from Advance Auto Parts. Minimize

Dorman� s Spark Plug Thread Repair Kit is engineered spec ... Read more

Dorman� s Spark Plug Thread Repair Kit is engineered specifically for replacing stripped plug sockets on some of Ford� s most popular truck applications. All our Spark Plug Thread Repair Kits are constructed from high-quality materials for long-lasting durability.Product Features:Conveniently packaged in a variety of sizes, assortments, and quantitiesMetal screws and nylon nuts included (where applicable)Tamper-proof screws provided for increased security (where applicable)Vehicle try-on testing has been conducted on this part to ensure trouble-free performance. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

For demanding Ford racing applications, MSD's Pro-Billet Du ... Read more

For demanding Ford racing applications, MSD's Pro-Billet Dual Pickup Distributors are the answer. Each distributor features a billet housing that is machined from 6061-T6 aluminum using computer controlled CNC-machining technology. Additional features include a fully adjustable mechanical advance consisting of a hardened advance cam, chromoly weights and weight pins that are TIG-welded to the advance plate. The advance assembly can also be locked-out with no welding. Two high output magnetic trigger pickups are bolted to the billet base of the distributor so you can have a secondary ignition trigger source for a backup ignition and coil.Product Features:Designed specifically for circle track or endurance racingStrong billet Aluminum housingsTwo magnetic Pick-upsAbility to switch to a secondary ignition at the filp of a switch.Requires an MSD Ignition Control 6, 7, or 8 series (not included)Note: Not legal for use or sale on pollution controlled vehicles. Most Ignition products are available for in-store pickup from Advance Auto Parts. Minimize

Available for multiple models/years. OE in-tank upgrade pum ... Read more

Available for multiple models/years. OE in-tank upgrade pumps. Ideal for supporting performance improvements. Replace original pump exactly. Includes all necessary hardware. Easy installation. In the early days of the automotive performance industry, you either ran what was available or you fabricated something you thought met your needs. Such needs were the building blocks of this industry, and it was through the efforts of many that we have the automotive aftermarket, but it was through the work of one name in particular to which many in the industry owe a great debt, and that name is Edelbrock.Product Features:OE in-tank upgrade pumpsIdeal for supporting performance improvementsReplace original pump exactlyIncludes all necessary hardwareEasy installation. Most Fuel Pumps and Tanks products are available for in-store pickup from Advance Auto Parts. Minimize

MSD is excited to offer this Ready-to-Run Distributor for t ... Read more

MSD is excited to offer this Ready-to-Run Distributor for this classic Ford engine! This distributor is the answer to weak breaker points or rebuilt aftermarket models. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the Ready-to-Run Distributors is their simple installation! All you need to do is connect three wires and you'll be cruising!Product Features:Maintenance-free magnetic pickup accurately triggers the moduleAdjustable mechanical advance allows you to custom-tailor an ignition curve to match your engine's needsHigh-output ignition module provides plenty of spark for improved performanceVacuum advance for economySimple, 3-wire connectionBuilt in Rev Limiter. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

These competition water pumps are designed for circle-track ... Read more

These competition water pumps are designed for circle-track and endurance-racing applications. They feature a revised impeller entry, a hard black anodized finish and .100" thicker rear cover for enhanced durability. Auxiliary water outlets ease fabrication of custom plumbing systems and auxiliary fittings are available as AN or NPT. These water pumps provide maximum cooling with equal distribution to both sides of the block within 1%. By eliminating hot spots, the engine produces optimum power from every cylinder without detonation and pre-ignition. Other features include billet hub and heavy-duty ball/roller bearings.Product Features:For circle-track and endurance-racing enginesBlack anodized finish with a 0.10" thicker rear coverLarge impeller for maximum pressureEqual distribution to both sides of block w-in 1 pcOnly flows in 1 direction for optimum efficiency. Most Cooling System products are available for in-store pickup from Advance Auto Parts. Minimize

Product Features:Fits Ford 289 - 302 (5.0). Utilizing the d ... Read more

Product Features:Fits Ford 289 - 302 (5.0). Utilizing the durable and dependable High Energy Ignition (HEI) system pioneered by GM, these distributors avoid the unsightly wiring of stock Ford electronic ignition systems by installing this one-piece distributor with an internally positioned coil and module. Easy to install: just connect one 12-volt hot wire to the distributor (has optional tach hook-up). These units offer calibrated advance curves that are optimized for maximum combustion efficiency and for the elimination of detonation damage and throttle ping. Assembled from precision-madeparts for advance curve smoothness. Offers longer term durability and a higher voltage spark that permits a bigger spark plug gap, resulting in more power and reduced plug fouling. Each unit includes a high-power coil, a premium hi-dielectric cap with brass terminals, and a low-saturation ignition module. By eliminating the stock-Ford ballast resistor, more ignition voltage results in improved spark. Incorporates easily found High Energy Ignition (HEI) replacement parts. Assembled with upper and lower bushings (stock Ford distributors have only a single bushing).Technical Note: Gear not compatible with roller cams. If using roller cams, please contact the cam manufacturer for proper gear selection. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

Early Flathead racers and cruisers alike will be excited to ... Read more

Early Flathead racers and cruisers alike will be excited to see this front mount Flathead Distributor! The billet aluminum distributor is topped off with our own Crab Cap with spark plug style terminals for improved wire connections. Just under the cap and Rynite race rotor is MSD's adjustable mechanical advance. This assembly features chromoly construction with TIG-welded weight pins to secure the precision fine blanked weights. MSD supplies different advance springs and stop bushings so you can dial-in an advance curve to meet your Flathead's specs. Just under the advance is MSD's race-proven magnetic pickup. This pickup, combined with a reluctor, produces accurate trigger signals that are responsible for firing the MSD Ignition Control. Bring your Flathead up-to-date with MSD performance.Product Features:Maintenance-free magnetic pickup accurately triggers the moduleAdjustable mechanical advance allows you to custom-tailor an ignition curve to match your engine's needsRynite Crab Cap with spark plug style terminals for improved wire connectionsNote: Requires an MSD Ignition Control 6, 7, or 8 series Ignition (not included). Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

MSD 8.5 mm Super Conductor Wire features a specially wound ... Read more

MSD 8.5 mm Super Conductor Wire features a specially wound copper-alloy conductor which has less than 50 ohms resistance. The core design creates an effective EMI. The sleeve is constructed from a special blend of silicone and synthetic material. The Dual crimp terminals offer a secure connection to the wire, and the heavy-duty boots are built to withstand high temperatures. Product Features:8.5 mm durable outer sleeve offers resistance to high heat and abrasionCopper-alloy conductor has less than 50 ohms per foot or resistanceHigh EMI-suppression capabilities due to materials and a special winding procedureDual crimp terminals secure the terminals to the wire and conductorRed sleeve with gray MSD spark plug boots. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

Racers and nostalgic Ford enthusiasts using the famous Ford ... Read more

Racers and nostalgic Ford enthusiasts using the famous Ford FE engine now have access to a distributor that is truly equal to the performance level of their engine. A magnetic pickup triggers your MSD Ignition Control accurately at any rpm. Above this pickup the mechanical advance assembly is positioned so it can be adjusted without disas� sembling the distributor. In addition, the specially ground advance cam is tig-welded to the 9/16" hardened shaft and the weight pins are staked and TIG-welded to the advance plate. Product Features:A maintenance-free magnetic pickup accurately triggers the moduleAdjustable mechanical advance allows you to custom-tailor an ignition curve to match your engine's needsAn oversized steel shaft is QPQ-coated for low friction and rides in a sealed ball bearing and an extra-long sintered bushing for high-rpm stabilityVacuum advance for enhanced fuel economyCARB Approved; legal for use in all states; D-40-39Requires an MSD Ignition Control 6, 7, or 8 series (not included). Most Ignition products are available for in-store pickup from Advance Auto Parts. Minimize

MPN #3870401. Mallory Unilite Distributor for Ford, Tach Dr ... Read more

MPN #3870401. Mallory Unilite Distributor for Ford, Tach Drive, 5.0L, Mechanical Advance. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

Ford Small Block 260-289-302-351W. Most Engine Cylinder Hea ... Read more

Ford Small Block 260-289-302-351W. Most Engine Cylinder Head Parts products are available for in-store pickup from Advance Auto Parts. Minimize

MSD is excited to offer this Ready-to-Run Distributor for t ... Read more

MSD is excited to offer this Ready-to-Run Distributor for this classic Ford engine! This distributor is the answer to weak breaker points or rebuilt aftermarket models. The distributors are equipped with a vacuum advance canister for cruising economy. Plus, there is a mechanical advance assembly that is mounted on top of the distributor shaft making it easy to adjust the advance to meet your needs. Another great feature of the Ready-to-Run Distributors is their simple installation! All you need to do is connect three wires and you'll be cruising!Product Features:Maintenance-free magnetic pickup accurately triggers the moduleAdjustable mechanical advance allows you to custom-tailor an ignition curve to match your engine's needsHigh-output ignition module provides plenty of spark for improved performanceVacuum advance for economySimple, 3-wire connectionBuilt in Rev Limiter. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

MPN #2655101. Mallory Dual Point Distributor for Ford, 221- ... Read more

MPN #2655101. Mallory Dual Point Distributor for Ford, 221-302, Mechanical Advance. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

Crankshaft Pulley - Single belt groove. Triple chrome plate ... Read more

Crankshaft Pulley - Single belt groove. Triple chrome plated steelProduct Features:Fits '65-'66 Ford 2896-5/16" Diameter, 3-bolt. Most Belts and Hoses products are available for in-store pickup from Advance Auto Parts. Minimize

The MSD Low-Profile Ford Crank Trigger Distributor is desig ... Read more

The MSD Low-Profile Ford Crank Trigger Distributor is designed specifically for dual carb sheet metal intakes and must be used with an MSD Flying Magnet Crank Trigger system. The Low-Profile distributor uses a large diameter distributor cap which allows it to carry the high voltage outputs of an MSD race ignition. For high-rpm stability, the Low-Profile distribu� tor's housing is CNC-machined from a solid billet of 6061-T6 aluminum. Inside this precision housing, a heat-treated 9/16" diameter distributor shaft is guided by an upper sealed ball bearing for high rpm endurance and stability.Product Features:Low Profile Crank Trigger DistributorNote: Must be used with an MSD Flying Crank Trigger systemLarge diameter Distributor Cap for High voltage transferNote: Will not fit XD and later Australian 351 Clevland engines.Requires an MSD Ignition Control 6, 7, or 8 series (not included)Note: Not legal for use or sale on pollution controlled vehicles. Most Ignition products are available for in-store pickup from Advance Auto Parts. Minimize

MPN #29429PD. Mallory Distributor Components - Performance ... Read more

MPN #29429PD. Mallory Distributor Components - Performance Gear for Ford SB V8. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize

MPN #2568701. Mallory Dual Point Distributor for Ford, 351W ... Read more

MPN #2568701. Mallory Dual Point Distributor for Ford, 351W, Mechanical Advance. Most Ignition and Tune-Up products are available for in-store pickup from Advance Auto Parts. Minimize