> Auto Parts and Accessories > Porsche > Flywheel Parts

Clutch Masters FW-005-AL Flywheel 05-06 Porsche Boxster S 3 ... Read more

Clutch Masters FW-005-AL Flywheel 05-06 Porsche Boxster S 3.2L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 05-06 3.2L Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Item Description | Vehicle Application | Shipping Handling ... Read more

Item Description | Vehicle Application | Shipping Handling | Payment Details | Return Policy | About Us About this item This is a brand new in box LUK DMF (Dual Mass Flywheel) for VW GOLF; JETTA (2.8L 6CYL). LUK is one of the largest OE flywheel manufacturer in the world and currently supplies original equipment parts to AUDI/VW, BMW and PORSCHE. Your local VW dealer sells the exact same flywheel for more than $800 but here on eBay, you can buy the same flywheel for a lot less. Please do not co Minimize

Clutch Masters FW-101-AL Flywheel 02-05 Porsche 996 3.6L Ca ... Read more

Clutch Masters FW-101-AL Flywheel 02-05 Porsche 996 3.6L Carrera C/4 Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 02-05 3.6L Carrera C/4 Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

New Porsche Boxster Flywheel. Brand: LUK. Fits Years: 2000, ... Read more

New Porsche Boxster Flywheel. Brand: LUK. Fits Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 00, 01, 02, 03, 04, 05, 06, 07. PartsGeek offers high quality new, OEM and aftermarket products. W0133-1647688 Minimize

Clutch Masters FW-101-AL Flywheel 98-01 Porsche 996 3.4L Cl ... Read more

Clutch Masters FW-101-AL Flywheel 98-01 Porsche 996 3.4L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 98-01 3.4L Carrera Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Item Description | Vehicle Application | Shipping Handling ... Read more

Item Description | Vehicle Application | Shipping Handling | Payment Details | Return Policy | About Us About this item This is a brand new in box LUK DMF (Dual Mass Flywheel) for 2003-2007 MINI COOPER S (6 SPEED). LUK is one of the largest OE flywheel manufacturer in the world and currently supplies original equipment parts to AUDI/VW, BMW and PORSCHE. Your local BMW/MINI dealer sells the exact same flywheel for more than $ 674 but here on eBay, you can buy the same flywheel for a lot less. Pl Minimize

Clutch Masters FW-005-AL Flywheel 00-04 Porsche Boxster S 3 ... Read more

Clutch Masters FW-005-AL Flywheel 00-04 Porsche Boxster S 3.2L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 00-04 3.2L Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Clutch Masters FW-038-AL Flywheel 05-10 Porsche 997 3.8L Cl ... Read more

Clutch Masters FW-038-AL Flywheel 05-10 Porsche 997 3.8L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 05-10 3.8L Carrera S Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

New Porsche 968 Flywheel. Brand: LUK. Fits Years: 1992, 199 ... Read more

New Porsche 968 Flywheel. Brand: LUK. Fits Years: 1992, 1993, 1994, 1995, 92, 93, 94, 95. PartsGeek offers high quality new, OEM and aftermarket products. W0133-1647570 Minimize

Clutch Masters FW-005-AL Flywheel 99-08 Porsche Boxster 2.7 ... Read more

Clutch Masters FW-005-AL Flywheel 99-08 Porsche Boxster 2.7L Features: Years: 99-08 2.7L Typical benefits of a lightweight flywheel for various engine types: Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Clutch Masters FW-934-AL Flywheel 00-05 Porsche 996 3.6L Cl ... Read more

Clutch Masters FW-934-AL Flywheel 00-05 Porsche 996 3.6L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 00-05 3.6L Turbo 4 (3600 lbs) Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

The dual-mass flywheels absorb engine vibrations before the ... Read more

The dual-mass flywheels absorb engine vibrations before they are transmitted to the driveline where they can create gear rattle. The unit is split into two sections: a primary section that bolts to the crankshaft, and a secondary section, onto which the clutch is bolted. The primary section dampens, isolates engine vibrations and prevents engine torque spikes from damaging the transmission. By design, dual-mass flywheels cannot be resurfaced. Premium grade materials for superior-quality friction surface Excellent heat-absorption capacity All new components and balance tested Backed by LuK and the industry's most trusted warranty Made in Germany Minimize

Clutch Masters FW-934-AL Flywheel 06-09 Porsche 997 3.6L Cl ... Read more

Clutch Masters FW-934-AL Flywheel 06-09 Porsche 997 3.6L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 06-09 3.6L Turbo (3600 lbs) Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Clutch Masters FW-005-AL Flywheel 06-08 Porsche Boxster S 3 ... Read more

Clutch Masters FW-005-AL Flywheel 06-08 Porsche Boxster S 3.4L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 06-08 3.4L Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Clutch Masters FW-005-AL Flywheel 96-99 Porsche Boxster 2.5 ... Read more

Clutch Masters FW-005-AL Flywheel 96-99 Porsche Boxster 2.5L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 96-99 2.5L Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

New Porsche 911 Flywheel. Brand: OE Aftermarket. Fits Years ... Read more

New Porsche 911 Flywheel. Brand: OE Aftermarket. Fits Years: 1984, 1985, 1986, 84, 85, 86. PartsGeek offers high quality new, OEM and aftermarket products. W0133-1598610 Minimize

Clutch Masters FW-101-AL Flywheel 04-08 Porsche 997 3.6L Ca ... Read more

Clutch Masters FW-101-AL Flywheel 04-08 Porsche 997 3.6L Carrera Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 04-08 3.6L Carrera Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Item Description | Vehicle Application | Shipping Handling ... Read more

Item Description | Vehicle Application | Shipping Handling | Payment Details | Return Policy | About Us About this item This is a brand new in box LUK DMF (Dual Mass Flywheel) for AUDI A4 2.8L. LUK is one of the largest OE flywheel manufacturer in the world and currently supplies original equipment parts to AUDI/VW, BMW and PORSCHE. Your local AUDI dealer sells the exact same flywheel for more than $ 887 but here on eBay, you can buy the same flywheel for a lot less. Please do not compare U.S./ Minimize

Clutch Masters FW-934-AL Flywheel 01-05 Porsche 996 3.6L Cl ... Read more

Clutch Masters FW-934-AL Flywheel 01-05 Porsche 996 3.6L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 01-05 3.6L Turbo GT2 (3600 lbs) Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Clutch Masters FW-005-AL Flywheel 06-08 Porsche Cayman 2.7L ... Read more

Clutch Masters FW-005-AL Flywheel 06-08 Porsche Cayman 2.7L Features: Years: 06-08 2.7L Typical benefits of a lightweight flywheel for various engine types: Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Clutch Masters FW-101-AL Flywheel 02-05 Porsche 996 3.6L Cl ... Read more

Clutch Masters FW-101-AL Flywheel 02-05 Porsche 996 3.6L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 02-05 3.6L Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Clutch Masters FW-934-AL Flywheel 07-09 Porsche 997 3.6L Tu ... Read more

Clutch Masters FW-934-AL Flywheel 07-09 Porsche 997 3.6L Turbo GT2 Features: Years: 07-09 3.6L Turbo GT2 (3600 lbs) Typical benefits of a lightweight flywheel for various engine types: Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Item Description | Vehicle Application | Shipping Handling ... Read more

Item Description | Vehicle Application | Shipping Handling | Payment Details | Return Policy | About Us About this item This is a brand new in box LUK DMF (Dual Mass Flywheel) for PORSCHE 911 (996, 997). LUK is one of the largest OE flywheel manufacturer in the world and currently supplies original equipment parts to Audi/VW, BMW, Mercedes and Porsche. PORSCHE sells the exact same flywheel for more than $ 1200 but here on eBay, you can buy the same flywheel for a lot less. Please do not compare Minimize

Clutch Masters FW-038-AL Flywheel 05-10 Porsche 997 3.8L Ca ... Read more

Clutch Masters FW-038-AL Flywheel 05-10 Porsche 997 3.8L Carrera 4S Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 05-10 3.8L Carrera 4S Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

New Porsche Cayman Flywheel. Brand: LUK. Fits Years: 2006, ... Read more

New Porsche Cayman Flywheel. Brand: LUK. Fits Years: 2006, 2007, 06, 07. PartsGeek offers high quality new, OEM and aftermarket products. W0133-1647688 Minimize

Clutch Masters FW-101-AL Flywheel 98-01 Porsche 996 3.4L Ca ... Read more

Clutch Masters FW-101-AL Flywheel 98-01 Porsche 996 3.4L Carrera C/4 Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 98-01 3.4L Carrera C/4 Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Clutch Masters FW-965-AL Flywheel 10-11 Porsche Cayman 3.6L ... Read more

Clutch Masters FW-965-AL Flywheel 10-11 Porsche Cayman 3.6L Features: Years: 10-11 3.6L DFI Typical benefits of a lightweight flywheel for various engine types: Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize

Clutch Masters FW-934-AL Flywheel 99-05 Porsche 996 3.6L Cl ... Read more

Clutch Masters FW-934-AL Flywheel 99-05 Porsche 996 3.6L Clutch Masters 2-Piece Billet Aluminum Flywheels are made from the highest quality 6061-T6 or better grade aluminum. This material is chosen for its properties that are much more suitable for the environment than the one-piece chromoly units, with regards to heat dissipation and serviceability. The replaceable friction surface used is incredibly tough high carbon steel. This allows mating with any type of clutch friction material without worry. The starter ring gears are made of high carbon heat-treated steel for long lasting durability. The unit is buttoned together with military grade fasteners to make the premier flywheel in the industry. Features: Years: 99-05 3.6L Turbo GT3 (3600 lbs) Reduced mass equals increased acceleration. A lightweight flywheel works particularly well with turbo-charged engines because it reduces typical turbo lag. Increased supercharger efficiency due to less parasitic drag on the crank. Improved mid-range torque in a normally aspirated engine due to not having to overcome the heavy weight of a stock flywheel. CM uses only 6061-T6 aircraft grade or better billet aluminum in the manufacturer of its flywheels. CM uses High Carbon steel for the friction surface. (Replaceable) CM uses an OEM steel ring gear secured by bolts. CM offers a limited lifetime warranty. CM Billet Aluminum Flywheels meet SFI Spec 1.1 or 1.2 **** Free Ground shipping in the contiguous U.S.. Please contact us for a quote for shipping outside the contiguous U.S. or for express shipping *** Minimize