|
Gloss Chassis Black produces an 85 Gloss for a custom look
... Read more
Gloss Chassis Black produces an 85 Gloss for a custom look with superior protection. It is a specially formulated coating that resists chips, corrosion temperatures up to 300 degrees F covers 8 sq. ft. (up to 4 times faster than similar sized aerosols), average sized car uses just 3 to 5 cans for the entire chassis Works great over bare metal or Eastwood Rust Encapsulator, or Eastwood Chassis Black Primer.Original long-lasting formula resistschips, corrosion, temps to 300degF Gloss Chassis Black produces an 85 Gloss for a custom look with superior protection. It is a specially formulated coating that resists chips, corrosion temperatures up to 300 degrees F covers 8 sq. ft. (up to 4 times faster than similar sized aerosols), average sized car uses just 3 to 5 cans for the entire chassis Works great over bare metal or Eastwood Rust Encapsulator, or Eastwood Chassis Black Primer. Click Here Eastwoods Original Chassis Black is formulated to provide you with the right sheen, durability and long lasting great looks. Its 85 gloss level is correct for many factory restorations or use in a custom application. Ideal for frames, suspension components, roll bars, differentials, floor boards and much more. Fortified with high solids and epoxy, Chassis Black resists chips, UV rays and high temperatures up to 300F. One aerosol can covers approximately 8 square feet.*Perfect for a factory or custom finish*Fortified with epoxy for durability*Resists temperatures up to 300F*One can cover approximately 8 Sq. FtDirectionsREAD ALL INSTRUCTIONS BEFORE USING1. Ensure surface is clean and free of debris, greases and oils. Use Eastwoods Chassis Kleen and/or PRE to remove stubborn grime and prepare the surface for painting.2. Chassis Black can be applied over bare metal or old paint. To ensure good adhesion, scuff the old paint with 320 grit abrasive. For the best adhesion apply Eastwoods Extreme Chassis Black Primer prior to painting. DO NOT USE OVER SELF-ETCHING PRIMERS. Test compatibility on a non-descript area before painting.3. SHAKE CAN VIGOROUSLY FOR AT LEAST ONE MINUTE. Apply to surface with steady strokes about 8-10 inches from surface. Its better to apply several light coats than one heavy coat. Ideal conditions are 70F to 90F at 50 (or less) humidity. Conditions will affect dry times.4. Apply several light coats until hiding is achieved. Allow at 15-20 minutes between each coat. Full cure time is 24-36 hours depending on conditions. If re-coating after 36 hours, scuff surface with 320 grit abrasive. 10000 10000Z EW10000 AER BCBLACK BFRIDAY BK04 BLACK CAN CHASEY CHASIS C CHASSIE CHASSY CHASY CHIP COATING COATINGS EASEW10000Z EASTWOOD EPOXY FORTIFIED FRAME HIGH PAINT EW10000Z PAINTS RESISTANT SC19 SPECIALTY SPRAY SPECIALTY SPRAY SPRAYCAN SPRAYPAINT SUSPENSION TSC SPRAYCAN SPRAYPAINT SUSPENSION TSC4
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Eastwood's exclusive Fender Roller won't let your fender ru
... Read more
Eastwood's exclusive Fender Roller won't let your fender ruin expensive tires on lowered vehiclesProfessional-grade fender former tool helps you easily increase the clearance between your tire and the fender, flare the fenders, or repair wheel-arch collision damage.Fender former eliminates tire rub by increasing tire-to-fender clearanceAdjustable fender-rolling roller gradually rolls the inner lip flatPerfect for lowered vehicles and vehicles with larger wheelsAdjustable-height arm lets you work on a wide range of automotive and light truck applicationsPro-grade Fender Roller eliminatestire rub on lowered vehicles To use- securely jack up vehicle and remove wheel. Mount Eastwood Fender roller to hub using factory lug nuts. Adjust height and angle so the roller is under the center of the fender's lip. Slowly rotate the unit side to side, occasionally turning in the handle until fender lip is evenly rolled inside. Tech tip- using a heat gun, Apply heat to the out side paint to avoid cracking.Our exclusive fender-rolling tool bolts directly onto the wheel's hub flange, and the elongated holes in the adapter plate fit all popular 4- and 5-bolt hubs. It's held in place with the included dished washers and your vehicle's lug nuts. Accommodates up to a 120.6 mm (4.75) 4- or 5-lug bolt circles. Forming arm adjustability ranges from a minimum of 14 to a maximum of 22-3/4 hub-center-to-edge-of-roller to handle most automotive and light truck projects. Non-returnable. Limited one-year warranty if defective, we'll replace the tool.Delrin174 ball-bearing fender-former roller is tough enough to easily form the fender, but without damaging the paint finish. To prevent paint from cracking when forming wheel arches, gently heat the paint before forming we recommend our Heat Pro Deluxe Variable-Temperature Heat Gun Kit (43522). Durable, heavy-duty powder-coated steel Fender Roller. Accessories43522 Heat Pro Deluxe Variable-Temperature Heat Gun Kit Q Will the Fender Roller work on all passenger carsA For the most part, yes, but won't work with vehicles with larger hubs, such as trucks, VWs and Porsches.Q Will it work on all fendersA Yes, except dual-thickness flanged fenders, mostly found on the rear of full-size cars, such as a 1987 Grand National.Q What range will it extendA From the center of the hub to the roller it will extend from 14 to 22-3/4. Make sure vehicle is secure before removing wheels. Use high-quality jack stands and wheel chocks. Always wear eye, skin and respiratory protection. Limited one-year warranty if defective, we'll replace the tool. 31158 607174003907 CG31158 CLEARANCE ADJUSTABLE TOOL TOOLS SHAPE SHAPING EAS31158 EASTWOOD BEND CUSTOMIZE EM376 EMUT FORMER FR31158 FS31158 JS-622 JS622 ROLLING ROLLED ROLL FORMING FORM FLARE FLARED SHAPER WHEELWELL WHEEL-WELL LIP WELL
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Sub-Frame Assembly supports a lightweight or fiberglass bod
... Read more
Sub-Frame Assembly supports a lightweight or fiberglass body while it's mounted on your RotisserieProvides six mounting points to prevent bending or torque of a vehicle body which cannot support itself off the chassis.L-shaped arm replaces the T-shaped swing arm on your RotisserieTwo 18 swing arms, three 57-1/2 outriggers, six 16 mounting armsRequires center connection tube (not included) see More InfoWorks with Eastwood's Standard, Plus and Pro Rotisserie modelsUnfinished steelPrevents bending of car body whichcan't support itself off its chassis Sub-Frame Assembly Kit allows easy mounting of Corvette, Kit Car, or other fiberglass or aluminum car bodies needing additional support when mounted to your Rotisserie. Provides a strong subframe of heavy unfinished steel with hardware included however, the user must obtain a 3-square, 3/16-thick tube that is 24 longer than your project vehicle. No welding or modifications required. 5-year mfr's. warranty on the steel. 202 lbs. Made in USA. Restoration, welding, painting, abrasive blasting, soda blasting 12177,13656, 13657 Door Bars12011, 12012, 12746, 12740 Welders50095 Soda Blaster12096, 12097 Gel Rust Dissolver 51483z, 51676, 51677Rust Converter50544zp, 50545zp 2K Ceramic Chassis Black Always make sure the vehicle is secure and balanced when using your Rotisserie. Always wear eye, skin, and respiratory protection. Read and understand instruction manual before using, since serious vehicle damage or bodily injury could occur. 13915 AUTOTWIRLER BRACKETS BRACKET MOUNTS MOUNTING SUBFRAME FRAME OFF KIT CAR SUBFRAME SUB-FRAME RESTORATION RACK ROTATE MOUNT RESTORE CORVETTE ROD ALUMINUM RESTORATION ROTISSERIE ROTISSERY ROTISERY ROTISERIE BODY MOUNT SBF-0310 SBF0310 SUBFRAME
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Securely mount your truck cab on any of our Rotisserie mode
... Read more
Securely mount your truck cab on any of our Rotisserie modelsThe Truck Cab Kit is designed to mount your truck cab or truck bed on any of our 3 Rotisserie models, and keep the mounting arms away from commonly damaged areas like the truck cab corners. Two 6' connection bars and four 8 mounting armsUnfinished steelFits our Standard, Plus and Pro RotisseriesSecurely mount your truck cabon any of our rotisserie models The two 6' connection tubes attach to the mounting arms provided with your Rotisserie, and four 8 mounting arms reach truck cab or bed mounts. 5-year warranty on the steel. Made in USA. Restoration, welding, painting, abrasive blasting, soda blasting 12177, 13656, 13657 Door Bars12011, 12012, 12746, 12740 Welders50095 Soda Blaster12096, 12097 Gel Rust Dissolver51483z, 51676, http//www.eastwood.com/ew-rust-converter-one-quart.html Rust Converter50544zp, 50545zp 2K Ceramic Chassis Black Always make sure the vehicle is secure and balanced when using your Rotisserie. Always wear eye, skin and respiratory protection. Read and understand the instruction manual before using, since serious vehicle damage or bodily injury could occur. 13914 AUTOTWIRLER SET EAS13914 RACK ROTATE MOUNT RESTORE TRUCK PICKUP FRAME OFF ROTISSERIE ROTISSERY ROTISERY ROTISERIE BODY MOUNT TCK-0311 TCK0311 TRUCKS CABS MOUNTS BRACKET BRACKETS RESTORATION
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Chassis Restoration Kit helps you take on rust, and winYou
... Read more
Chassis Restoration Kit helps you take on rust, and winYou get 2 cans of each of our 3 best rust fighters to stop rust in its tracks, convert it into a primer, then encapsulate and finish it so your vehicle's metal looks like it just rolled off the assembly lineRust ConverterRust Encapsulator (Black) Extreme Chassis Black (Gloss) Convert rust to a primer, encapsulateit, topcoat with Extreme Chassis Black If the metal parts you're working on are covered with surface rust, this is the kit for you, saving you time and money as it prevents rust from returning.(1) Rust Converter stops rust in its tracks, and turns it into a protective, ready-to-paint black primer, without sanding.(2) Rust Encapsulator has been reformulated with TWICE the corrosion resistance to prevent rust from returning.(3) Extreme Chassis Black Gloss has 3 times the resins of traditional coatings, so it's tough enough for any undercar component.Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada. 51482Z Rust Converter (Two 13-oz. aerosol cans) 16060Z Rust Encapsulator (Two 15-oz. aerosol cans) 11172Z Extreme Chassis Black Gloss (Two 14-oz. aerosol cans) 10041Z PRE Painting Prep 51111 Suspension Restoration Kit 10199 Pistol-Grip Spray Can Tool Always wear eye, skin and respiratory protection. 51574 51574 Z 51574Z encapsulator rust converter extreme chassis black coating
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Painting you frame with Eastwood's Chassis Black Why not fi
... Read more
Painting you frame with Eastwood's Chassis Black Why not finish the front end suspension at the same time Eastwood has come up with handy suspension aerosol detail kit that includes all you need to correctly detail your car's front end. Kit includes PRE Paint Prep, 2 aerosols (10041Z), 1 can each of Underhood Black (10024 Z), Detail Gray (10036 Z), Spray Gray (10032z(, Silver Cad (10022z) and Zinc Phosphate (10281z).7 aerosols help you properlydetail your car's front end suspension All domestic and imported vehiclesPainting you frame with Eastwood's Chassis Black Why not finish the front end suspension at the same time Eastwood has come up with handy suspension aerosol detail kit that includes all you need to correctly detail your car's front end. Kit includes PRE Paint Prep, 2 aerosols (10041Z), 1 can each of Underhood Black (10024 Z), Detail Gray (10036 Z), Spray Gray (10032z(, Silver Cad (10022z) and Zinc Phosphate (10281z).Due to the new regulations pertaining to paint recycling we are unable to ship this product to Alberta Canada at this time. Contains 10041 PRE qty 2 10024Z Underhood Black qty.1 10036Z Detail Gray qty 1 10032Z Spray Gray qty 1 10022Z Silver Cad qty 1 10281Z Zinc Phosphate Chassis Black 19830 3M Respirator 10020z Exhaust paint Caliper Paints 29894z Extreme Diamond Clear10331z Golden Cad system Wheel paints Trunk Paints always wear eye, skin and respiratory protection. 51111 51111 Z 51111Z PAINT PAINTS SET COATINGS EASTWOOD CHASSIS EAS51111Z center link yoke drive shaft hubs 51111 control arms brakes brake pitman arm steering sway bar links spindles suspension undercar springs tie rods
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
2-Step Restoration Kit first encapsulate, then coat, the ru
... Read more
2-Step Restoration Kit first encapsulate, then coat, the rustIt's all in this kit. Step 1 seal and stop corrosion from spreading with Eastwood Rust Encapsulator. Step 2 coat it with Extreme Chassis Black Gloss, with 3 times the resins of traditional coatings.1-qt. can of Rust Encapsulator penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areasTwo 1-qt. cans of Extreme Chassis Black Gloss offer improved resistance to brake fluid, fuel, solvent, chips and scratchesStop and seal rust with RE topcoatwith tough Extreme Chassis Black Eastwood Rust Encapsulator has been tested by an independent lab to be one of the most effective rust-preventive products yet. Rust Encapsulator is a great primer for floor pans and other underbody parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane topcoats. 1-qt. can covers about 50 sq. ft.3 times more resins make our Extreme Chassis Black Gloss 3 times more durable than our original Chassis Black formula. Can be re-coated at any time without lifting. 1-qt. can covers about 40 sq. ft. (you get two cans).Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada. 16065ZP Black Rust Encapsulator, Quart (1 can)11173ZP Extreme Chassis Black Gloss, Quart (2 cans) CHASSIS BLACK RUST ENCAPSULATOR SPRAYCAN SPRAYPAINT SPRAY CAN OEM SEMI-GLOSS 11960 11960ZP 11960z COATING SPRAYCAN CHASSIS 11960 ZP WITH EAS11960ZP EASTWOOD EASTWOOD'S CHASSY RESTO SPECIALTY COATINGS FRAME EPOXIE EPOXY
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
2-Step Restoration Kit first encapsulate, then coat, the ru
... Read more
2-Step Restoration Kit first encapsulate, then coat, the rustIt's all in this kit. Step 1 seal and stop corrosion from spreading with Eastwood Rust Encapsulator. Step 2 coat it with Extreme Chassis Black Satin, with 3 times the resins of traditional coatings.1-qt. can of Rust Encapsulator penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areasTwo 1-qt. cans of Extreme Chassis Black Satin offer improved resistance to brake fluid, fuel, solvent, chips and scratchesStop and seal rust with RE topcoatwith tough Extreme Chassis Black Eastwood Rust Encapsulator has been tested by an independent lab to be one of the most effective rust-preventive products yet. Rust Encapsulator is a great primer for floor pans and other underbody parts. It fills tiny pin-holes and surface irregularities, and is compatible with lacquer, enamel and urethane topcoats. 1-qt. can covers about 50 sq. ft.3 times more resins make our Extreme Chassis Black Satin 3 times more durable than our original Chassis Black formula. Can be re-coated at any time without lifting. 1-qt. can covers about 40 sq. ft. (you get two cans).Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada. 16065 Black Rust Encapsulator, Quart (1 can)11176Z Extreme Chassis Black Satin, Quart (2 cans) CHASSIS BLACK RUST ENCAPSULATOR COATING EASTWOOD CHASSEY PAINT SPRAYCAN SPRAYPAINT SPRAY CAN OEM SEMI-GLOSS 11962 11962ZP 11962z EAS11962ZP SPECIALTY COATINGS FRAME EPOXIE EPOXY
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
2 Cans of Extreme Chassis Black Are you restoring or repai
... Read more
2 Cans of Extreme Chassis Black Are you restoring or repairing an old part If that part is covered with surface rust, this is the kit for you. This kit will save you time and money and prevent the rust from returning. Simply apply Eastwood's Rust converter over the surface rust and before you know it, the rust is converted to an inert base that can be used as a primer. Then top coat with Chassis Black and you'll have a beautiful finish that looks like it just rolled off the assembly lineConvert rust to a primer, thentopcoat with Extreme Chassis Black Are you restoring or repairing an old part If that part is covered with surface rust, this is the kit for you. This kit will save you time and money and prevent the rust from returning. Simply apply Eastwood's Rust converter over the surface rust and before you know it, the rust is converted to an inert base that can be used as a primer. Then top coat with Chassis Black and you'll have a beautiful finish that looks like it just rolled off the assemble line.Due to the new regulations pertaining to paint recycling we are unable to ship this product to Alberta Canada at this time. Contains 2 cans of 51482 Rust Converter 2 cans of 11172z Extreme Chassis Black Gloss 10041z Pre Painting Prep 51111 Suspension restoration kit 10199 Can trigger always wear eye, skin and respiratory protection 51576 51576 Z rust converter extreme chassis black
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
100 new components with Deloc Remy patented technology and
... Read more
100 new components with Deloc Remy patented technology and OE design. Replaces heavy and worn original starter. Eliminates hot starting problems. Assure clearance and cooling for header applications. Direct bolt in design assures easy installation. Do not be mislead by inexpensive re-manufactured units. These are 100 brand new Remy designed units that outperform inferior units. Don't take the chance with reman. units and being let down on the side of the road. These units have permanent magnet technology and high temperature solenoids to handle high heat and high compression engines assuring quick and easy starts.Not re-manufactured this is a brand new Remy-designed starter 1953-1986 8 cylinder engines with 153 or 168 tooth flywheel and STRAIGHT bolt pattern 9 tooth pinion gear on starter100 new components with Deloc Remy patented technology and OE design. Replaces heavy and worn original starter. Eliminates hot starting problems. Assure clearance and cooling for header applications. Direct bolt in design assures easy installation. Do not be mislead by inexpensive re-manufactured units. These are 100 brand new Remy designed units that outperform inferior units. Don't take the chance with reman. units and being let down on the side of the road. These units have permanent magnet technology and high temperature solenoids to handle high heat and high compression engines assuring quick and easy starts. 7.7lbs Check your original starter to see if the (2) mounting bolts are straight (parallel to each other) or If straight use 11728 If offset use 11729 high torque unit provides 1.7KW of power These units are 100 new not remanufactured Disconnect negative battery lead before removing starter 11728 21590DR2 6788NEAS max power maxpower maxx power maxxpower starter GM high torque mini starter PG260
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Extreme Chassis Black Satin and Rust Encapsulator Kit stops
... Read more
Extreme Chassis Black Satin and Rust Encapsulator Kit stops rust and top-coats with 3X the resins of traditional coatings, so it's tough enough for any undercar componentFirst, stop and seal rust with the Rust Encapsulator, then top-coat it with our tough, OEM-matching, Extreme Chassis Black Satin formula that provides extreme durability 3 times more resins make it 3 times more durable than our original Chassis Black.Rust Encapsulator seals and stops rust and corrosion from spreadingExtreme Chassis Black Satin offers improved resistance against corrosion, chips and scratchesApply multiple coats without liftingEnough to cover most front sub-frames, or up to 20 sq. ft., with a double coatStop and seal rust with RE topcoatwith tough Extreme Chassis Black Black Rust Encapsulator (2 cans).Stop rust in its tracks Our Rust Encapsulator has been reformulated with twice the corrosion resistance of our original formula.Extreme Chassis Black Satin (2 cans).3 times more resins make it 3 times more durable than our original Chassis Black coating. This maximum-durability satin formula offers improved resistance to brake fluid, fuel, solvent, chips and scratches. Due to regulations pertaining to paint recycling, at this time we are unable to ship this product to Alberta, Canada. 11175Z Extreme Chassis Black Satin, 14-oz. Aerosol (2 cans)16060Z Black Rust Encapsulator, 15-oz. Aerosol (2 cans) Always wear eye, skin and respiratory protection when painting. Follow label directions and consult MSDS for specific warnings. CHASSIS BLACK RUST ENCAPSULATOR COATING EASTWOOD CHASSEY PAINT SPRAYCAN SPRAYPAINT SPRAY CAN OEM SEMI-GLOSS 11958 11958 Z 11958Z EAS11958Z SPECIALTY COATINGS FRAME EPOXIE EPOXY
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
2K Ceramic Underhood Black Activator...so you only have to
... Read more
2K Ceramic Underhood Black Activator...so you only have to do it onceEastwood's 41 2K (2-component) Urethane Ceramic Underhood Black is the only underhood coating fortified with nano-ceramic particles to provide the ultimate in durability, chemical resistance and long-lasting good looks. Mix 41 with activator includedUse your HVLP spray gun to applyQuart is enough for about 48 square feetNano-ceramic particles for chemical resistance, long-lasting good looks Eastwood's Underhood Black is the right 10-20 semi-gloss to match that original factory sheen on firewalls, fender wells, brackets, heater boxes, pulleys and more. For maximum durability, apply over Eastwood's Epoxy Primer.Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations check with your local and state guidelines as some areas may have stricter regulations than others. 2K Urethane Ceramic Underhood Black, 1-quart canEastwood Urethane/Ceramic Activator, 8-oz. can 10041Z PRE Painting Prep51550 Eastwood Concours HVLP Paint Spray Gun with 1.2mm tip12817 Paint Gun Accessory Kit50242ZP Epoxy Primer50243ZP Epoxy Primer Catalyst11455, 11456 SAS Bandit Respirators51559 Digital Regulator51483Z Rust Converter, Aerosol To apply, mix 41 with the urethane activator included. (Reduction is not necessary, but can be achieved using 50104ZP Zero-VOC Urethane Paint Reducer.) Use an HVLP gun with 1.2-1.5mm nozzle size. Apply in two medium wet coats, allowing 10-15 minutes between each coat. A dry film thickness of 2 mils is recommended. Complete cure time is 24 hours. Pot life is approximately 2 hours. Keep away from heat, sparks and open flame. Avoid prolonged contact with skin and breathing of vapors. Always wear appropriate eye, skin and respiratory protection. Consult MSDS for specific safety instructions and precautions. 11973 11973 ZP 50253 50253zp underhood under hood black firewall paint fender well wells 10024z 10024 10045zp 10045
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Eastwood Urethane Clearcoat plus Activator System makes 1-1
... Read more
Eastwood Urethane Clearcoat plus Activator System makes 1-1/2 gallons of premium clearcoatEastwoods premium urethane clearcoat system is formulated to deliver the ultimate shine and miles-deep appearance required of a custom-painted, show-quality finish. System includes 1 gallon of European Urethane Clearcoat and 2 quarts of Urethane Activator.Easy to spray flat, and even easier to polishLong-lasting protection from UV, chemicals and weatheringHigh-solids content to build quickly and avoid shrink-back as it curesDelivers the shine and miles-deep appearance of a show-quality finish Clear top coat ofr Eastwood Urethane paints.Eastwood Euro Urethane Clear is a premium 21, high-solids, clearcoat made from superior European resins, so it dries fast, with a beautiful gloss and excellent depth-of-image. Flows and levels easily with no shrinkage or dieback, and features excellent durability and long-lasting protection against UV rays, weathering and everyday wear. Formulated to be used in conjunction with Eastwoods Single-Stage Urethane Paints for increased gloss and protection, or with other basecoat systems. This system is National Rule Compliant (VOC 4.2 lbs./gal.).Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations check with your local and state guidelines as some areas may have stricter regulations than others. Includes one gallon of 50250ZP Urethane Clear, plus two quarts of 50252ZP Urethane Clear 21 Activator, to make a total of 1.5 gallons of premium clearcoat. Click Here for Urethane Clear Tech Sheet Always wear eye, skin and respiratory protection when painting, and follow instructions on the can. 50250 50252 Eurpean clear 2k 51144 51144 ZP
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Securely mount your 67-81 Camaro/Firebird on our Standard o
... Read more
Securely mount your 67-81 Camaro/Firebird on our Standard or Pro RotisserieThese Camaro Mounting Brackets bolt onto the rear leaf spring shackle mount on first- and second-generation (1967-1981) Camaro/Firebirds. The Camaro Mounting Brackets also bolt onto the 16 mounting arms provided with your Rotisserie (Standard or Pro models). Also fits most uni-bodies with a rear leaf spring shackle mountPre-welded brackets no modification requiredUnfinished steelDoes NOT fit Plus Rotisserie model see 13912Mount your 67-81 Camaro/Firebirdon our standard or pro rotisserie This is the most universally accepted bracket, since it can be used on most uni-bodies with a rear leaf spring shackle mount (including 67-81 Camaros and Firebirds). 2-square, 6 collar with 3 spacer built-in to clear rear valance pan. Pre-welded brackets no modification required. 5-year mfr's. warranty on the steel. Made in the USA.Does NOT fit Plus Rotisserie model see 13912. Restoration, welding, painting, abrasive blasting, soda blasting 12177, 13656, 13657 Door Bars12011, 12012, 12746, 12740 Welders50095 Soda Blaster12096, 12097 Gel Rust Dissolver51483z, 51676, 51677 Rust Converter50544zp, 50545zp 2K Ceramic Chassis Black Always make sure the vehicle is secure and balanced when using your Rotisserie. Always wear eye, skin and respiratory protection. Read and understand the instruction manual before using, since serious vehicle damage or bodily injury could occur. 12178 ADAPTER BRACKET BODY ROTATOR SPIN SPINNER ROLL OVER CAB-0305 EAS12178 MOUNT SET KIT ROTISSERIE ROTISSERIES BRACKET MOUNTS TILT TILTER WHIRLER WIRLER WHURLER WURLER
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Mount your '64-1/2 to '73 Mustangs and Ford uni-bodies on o
... Read more
Mount your '64-1/2 to '73 Mustangs and Ford uni-bodies on our PLUS model RotisserieThese Mustang Mounting Brackets (PLUS model) bolt onto the rear leaf spring shackle mount and front bumper mounts on 1964-1/2 to 1973 Mustangs and most Ford uni-bodies. The brackets connect to the mounting arms provided with your Rotisserie (Plus model only). Pre-welded rear leaf spring shackle mounts, pre-drilled front bumper mountsIncludes mounting bolts to attach to your car bodyunfinished steelDoes NOT fit Standard or Pro Rotisserie modelsMount '64-1/2 to '73 Mustang andFord uni-bodies on our PLUS Pre-welded rear leaf spring shackle mounts, pre-drilled front bumper mounts. No welding or modifications required. 5-year mfr's. warranty on the steel. Made in the USA.Fits our PLUS Rotisserie model only. Restoration, welding, painting, abrasive blasting, soda blasting 12177, 13656, 13657 Door Bars12011, 12012, 12746, 12740Welders50095 Soda Blaster12096, 12097 Gel Rust Dissolver51483z, 51676, 51677 Rust Converter50544zp, http//www.eastwood.com/2k-ceramic-cb-gloss-and-activator.html 2K Ceramic Chassis Black Always make sure the vehicle is secure and balanced when using your Rotisserie. Always wear eye, skin and respiratory protection. Read and understand the instruction manual before using, since serious vehicle damage or bodily injury could occur. 13913 AUTOTWIRLER SET EAS13913 FORD MUSTANGS BRACKET BRACKETS MOUNTS RESTORATION MUK-0301 MUK0301 RACK ROTATE MOUNT RESTORE MUSTANG ROTISSERIE ROTISSERY ROTISERY ROTISERIE BODY MOUNT
Minimize
|
This store is not yet rated
|
Go To Store
|
|
Eastwood Disc Brake Caliper Silver Ceramic Paint Kit Eastwo
... Read more
Eastwood Disc Brake Caliper Silver Ceramic Paint Kit Eastwood Part Number 11840 Z Eastwood's urethane caliper paints are the only caliper coatings on the market to use nano-ceramic technology. These durable paints resist heat and road grime and brake dust wipe off easily. You can apply these without dissassembling the brake assemblies. Or paint new components before they go on the car. This coating is resistant to high temperatures, UV sunlight and most chemicals. For added gloss and durability, add Eastwoods 4:1 urethane activator, 21854 Z not included. This kit comes with everything you need to prep and paint four calipers. 16 ounces of Eastwood Silver Caliper paint 11 ounce aerosol of Eastwood Pre Painting Prep 1 Quart Mixing Cup and Lid Poly brush pack for application Great for brake drums too!
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
FREE Shipping
Go To Store
|
|
Securely mount your 67-81 Camaro/Firebird on our PLUS model
... Read more
Securely mount your 67-81 Camaro/Firebird on our PLUS model RotisserieThese Camaro Mounting Brackets (PLUS model) bolt onto the rear leaf spring shackle mount and front sub-frame stubs on first- and second-generation (1967-1981) Camaro/Firebirds. The rear brackets slide onto the 16 mounting arms provided with your Rotisserie (Plus model only). Front mounting arms are our 8 mounting arms included that bolt directly onto the firewall mount on most GM uni-bodiesIncludes mounting bolts to attach to your car bodyUnfinished steelDoes NOT fit Standard or Pro Rotisserie models see 12178 for that kitMount your 67-81 Camaro/Firebirdon our PLUS model rotisserie Rear brackets mount onto the rear leaf spring shackle mount. Front mounting arms are our 8 mounting arms that bolt directly onto the firewall mount on most GM uni-bodies. Pre-welded brackets, no modification required. 5-year mfr's. warranty on the steel. Made in the USA.Fits our PLUS Rotisserie model for the kit that fits Standard or Pro Rotisserie models, see 12178. Restoration, welding, painting, abrasive blasting, soda blasting 12177, 13656, 13657 Door Bars12011, http//www.eastwood.com/mig-welder-110vac-135a-output.html, 12746, 12740 Welders50095 Soda Blaster12096, 12097 Gel Rust Dissolver51483z, 51676, 51677 Rust Converter50544zp, 50545zp 2K Ceramic Chassis Black Always make sure the vehicle is secure and balanced when using your Rotisserie. Always wear eye, skin and respiratory protection. Read and understand the instruction manual before using, since serious vehicle damage or bodily injury could occur. 13912 AUTOTWIRLER SET ARM ARMS SS Z28 BRACKETS BRACKET RESTORATION CHEVY CHEVROLET CAK-0302 CAK0302 EAS13912 MOUNTS RACK ROTATE MOUNT RESTORE CAMARO ROTISSERIE ROTISSERY ROTISERY ROTISERIE BODY MOUNT
Minimize
|
This store is not yet rated
|
Go To Store
|
|
The Leaf Spring Mounting Brackets allow the Auto Twirler to
... Read more
The Leaf Spring Mounting Brackets allow the Auto Twirler to be attached to the rear leaf spring bracket on your car. These may be used on a wide variety of vehicles equipped with a leaf spring mounting system and no rear valence attachment points. Applicable to post '71 Mustangs, A E body Mopars, Nova and many others. Customer must set height and depth of mount and weld into location. Most full-framed vehicles will require no addl brackets other than the mounting that comes with the Auto Twirler (brackets are normally for unibod apps). Unpainted. 1 yr mfr. warranty. Made in USA.For cars with leaf spring mounting,no rear valence attachment points The leaf Spring Mounting Brackets (pair) allows the Twirler to be attached to the rear leaf spring bracket on your car. These may be used on a wide variety of vehicles equipped with a leaf spring mounting system and no rear valence attachment points. Applicable to post '71 Mustangs, A E body Mopars, Nova and many others. Customer must set height and depth of mount and weld into location. Most full-framed vehicles will require no addl brackets other than the mounting that comes with the Auto Twirler (brackets are normally for unibod apps). Unpainted. 1 yr mfr. warranty. Made in USA. 12181 199 12181 BODY ROTATOR SPIN SPINNER ROLL OVER BRACKETS ROTISSERIE ROTISSERIES MOUNTS SUPPORTS EAS19912181 MOUNT ADAPTER TWIRLER AUTO SUPPORT HOLD HOLDERS HOLDER TILT TILTER UWB-0317 UWB0317 WHIRLER WIRLER WHURLER WURLER
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
This easy to use aerosol etches and primes bare, rustfree m
... Read more
This easy to use aerosol etches and primes bare, rustfree metal in one step. Adheres to steel, aluminum, stainless steel, and galvanized steel and is compatable with virtually any paint or auto finish. This self-etching formula bonds better to bare metals than other aerosol primers. It is also a single- stage formula which requires no catalyst, making it even easier to use.Etches and primes bare,rust-free metal in one step This easy to use aerosol etches and primes bare, rustfree metal in one step. Adheres to steel, aluminum, stainless steel, and galvanized steel and is compatable with virtually any paint or auto finish. This self-etching formula bonds better to bare metals than other aerosol primers. It is also a single- stage formula which requires no catalyst, making it even easier to use. Click Here for Material Safety Data Sheet 1365Z 16014Z 16114Z ACID ACIDLESS AER AEROSL BK04 CAN ETCH ETCHE ETCHING ETCHS FREE GRAY HPPREP EASEW16014Z EW16014Z PAINT PREP PREVENTION PRIME PRIMERS RP19 RUST SELF-ETCHING SPRAY SPRAYCAN SPRAYPAINT TP TRP1 TRUNK TSC14 TSC17
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
This easy to use aerosol etches and primes bare, rust-free
... Read more
This easy to use aerosol etches and primes bare, rust-free metal in one step. Adheres to steel, aluminum, stainless steel, and galvanized steel and is compatible with virtually any paint or auto finish. This self-etching formula bonds better to bare metals than other aerosol primers. It is also a single- stage formula which requires no catalyst, making it even easier to use.Etches and primes bare, rust-freemetal in one step This easy to use aerosol etches and primes bare, rustfree metal in one step. Adheres to steel, aluminum, stainless steel, and galvanized steel and is compatible with virtually any paint or auto finish. This self-etching formula bonds better to bare metals than other aerosol primers. It is also a single- stage formula which requires no catalyst, making it even easier to use.Due to the new regulations pertaining to paint recycling we are unable to ship this product to Alberta Canada at this time. Click Here for Material Safety Data Sheet 1365Z 16014Z 16114Z ACID ACIDLESS AER AEROSL BK04 CAN ETCH ETCHE ETCHING ETCHS FREE GRAY HPPREP EASEW16114Z EW16114Z PAINT PREP PREVENTION PRIME PRIMERS RP19 RUST SELF-ETCHING SPRAY SPRAYCAN SPRAYPAINT TP TRP1 TRUNK TSC14 TSC17
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
This Detail Paint is specially formulated to duplicate the
... Read more
This Detail Paint is specially formulated to duplicate the original look of die cast and stamped steel. Protected up to 300 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15 gloss. Great on alternator and distributor housings.Restore the original color of metalparts, and protect against rust This Detail Paint is specially formulated to duplicate the original look of die cast and stamped steel. Protected up to 300 degrees F by this paint, metal parts will keep that brand new look for a long time. Available in aerosols and quarts. One aerosol covers 6 sq.ft., one quart covers 50 sq.ft., acrylic lacquer, natural low 4-15 gloss. Great on alternator and distributor housings. Due to the new regulations pertaining to paint recycling we are unable to ship this product to Alberta Canada at this time. Click Here for Material Safety Data Sheet SPECIALTY SPRAY SPRAYPAINT STAMPED STEEL 10036Z AER CAN CAST COATING COATINGS DIE DYE EASEW10036Z EASTWOOD EMSC METAL NATURAL PAINT SC19 EW10036Z TSC7
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Gator Guard II Liner Kit in black seals and protects your t
... Read more
Gator Guard II Liner Kit in black seals and protects your truck bedA truck bed that's lined with a tough, durable, black coating like Gator Guard II increases your truck's resale value, reduces maintenance, and adds a nicely detailed look.2-part epoxy formulaBlackJust spray, brush or roll on1 kit covers 32 sq. ft.Durable, non-skid, chip-resistantblack coating covers 32 sq. ft. If you'd use a standard drop-in liner, it can warp and trap water and contaminants that can lead to bed corrosion. But our 2-part epoxy system offers a non-skid, chip-resistant black finish that's flexible at low temperatures, so water and contaminants can't get trapped underneath. Easy to apply with a wide brush or roller, or spray-on with our 20441 Undercoating Gun. Adheres to firmly adhering paint or bare metal. Degrease area to be coated and mask. One kit covers 32 square feet, and most truck beds will require 2 kits (2 or more kits are available at a discounted price). Each Truck Bed Liner Kit includes one container each of parts A and B, a total of about 1.8 quarts (enough to cover the bed of a small truck). For larger trucks or heavier coats, get 2 kits at a discounted price. Click Here for Material Safety Data Sheet (Q) How long after application must I wait to use the truck bed(A) At 72 degreesF surface will remain tacky for 7 hours. After 48 hours, surface will have no product transfer and may be used for heavy loads. Do not wash surface with soap, water or any other solvents for a minimum of 2 days after application. This coating is appropriate for all surfaces except polyethylene and similar plastics. Before coating, lightly scuff bed surface to roughen. Make sure surface is free of any grease or oil. Mix equal parts of A and B thoroughly. Brush or roll mixed material at a 5-10-mil thickness. For spray application using a Shutz-type gun, apply a medium-wet coat at 35-65 psi. Immediately clean off any overspray and applicator with mineral spirits or paint thinner. Works best between 65 and 95 degreesF. One kit coats 32 sq. ft. with a 5-10-mil coat. 10129 10129 Z 10129Z 776174100869 776174100968 BEDLINER BGG2 BK04 COATING DOMSURE EAS10129Z EPOXY GATER GAURD 11 UNDERBODY GG2A SC19 SPECIALTY COATINGS TSC21 TWO PART 2 BRUSH ON BRUSH-ON BRUSHON UNDER COAT EWCP
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Professional Grade TINTABLE Bedliner - This durable urethan
... Read more
Professional Grade TINTABLE Bedliner - This durable urethane textured bedliner can be tinted with enamel, urethane or base coat to match the vehicle's color. Simply mix color of choice with gallon of bedliner to achieve desired shade, catalyze and spray with any undercoating gun. Dries in 8 hours, ready for use in 48 hours. Includes enough materials to coat most 8 foot truck beds 1 gallon of bedliner, 1 quart of catalyst, a 2 1/2 quart mixing container, 2 undercoating (shutz) bottles, and complete instructions on the label. Great for 149Fender Wells149Floor Pans149Rocker Panels 149Truck BedsDurable textured bedliner can betinted to match your truck's color For best results mix entire gallon with paint of your choice to tint but DON'T CATALYZE. Only catalyze one quart at a time. Pot life is 20 minutes at 70 degrees F. High heat and humidity will substantially reduce pot life. This product is applied best with an undercoating gun at 45-90 psi. Apply 2 coats, allowing 10-20 minutes flash time between coats. Allow 45 minutes flash time for a third coat if desired. Optimum film thickness is 15-20 mils. Can not be tinted with lacquer or water based paints.Professional Grade TINTABLE Bedliner - This durable urethane textured bedliner can be tinted with enamel, urethane or base coat to match the vehicle's color. Simply mix color of choice with gallon of bedliner to achieve desired shade, catalyze and spray with any undercoating gun. Drys in 8 hours, ready for use in 48 hours. Includes enough materials to coat most 8 foot truck beds 1 gallon of bedliner, 1 quart of catalyst, a 2 1/2 quart mixing container, 2 undercoating (shutz) bottles, and complete instructions on the label. Includes enough materials to coat most 8 foot truck beds 1 gallon of bedliner, 1 quart of catalyst, a 2 1/2 quart mixing container, 2 undercoating (shutz) bottles, and complete instructions on the label. For best results coat the front and sides first followed by the floor and finish with the tailgate. Remove all masking tape while the final coating is still wet. Allow to dry 8 hours prior to delivery and 48 hours before use of truckbed. Click Here for Material Safety Data Sheet 10258 10258 ZP 10258 ZP SEM LINING TRUCKBED KITS 2 PART TWO 39650 4064678639650 646786396502 BEDLINER BEDLINERS LINERS SPRAY ON IN COLOR MATCH COATKIT GATOR GUARD SPECIALTY COATING COATINGS COLORABLE GG2A PROGRADE PRO GRADE PRO-GRADE SC09 EWCP TSC21 URETHANE SPRAYABLE BED LINER
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
If you project vehicle is pre-1989, ZDDP Plus Oil Additive
... Read more
If you project vehicle is pre-1989, ZDDP Plus Oil Additive is a must for keeping that engine running smoothlyIf your engine was designed before 1989, the camshaft's non-roller lifters require ZDDP in the motor oil to prevent premature deterioration. However, the U.S. government ruled that ZDDP could no longer be put into domestic motor oils starting in 1989, so today's motor oils won't provide the ZDDP your older engine needs...unless you add this ZDDP Plus Oil AdditiveZDDP alters bearing and journal surface characteristics to prevent metal-on-metal contactZDDP reduces the tendency of parts to scuff or gall under heavy loadsAdd a 4-oz. bottle of ZDDP Plus to every 4- or 5-quart oil changeEconomical 10-packPre-'89 engine ZDDP prevents premature non-roller lifter deterioration Applicable with all grades of conventional and synthetic motor oils. Add at time of oil change. Can be added at any time but best time is at oil change. Should only be used in motor produced in 1989 and older. Not for use in diesel motors. Not for use with OBD controlled motors.After 70+ years, the EPA mandated that all domestic motor oil producers remove ZDDP (Zinc Dialkyl Dithio Phosphate) from all conventional and synthetic motor oil. If your engine was designed before 1989, the non-roller lifters still require ZDDP to avoid premature deterioration. Our ZDDP Plus Oil Additive puts back what your pre-1989 engine needs Ten 4-oz. bottles of ZDDP Plus Oil Additive Click Here for Material Safety Data Sheet (Q) Can ZDDP Plus Oil Additive be used in both conventional and synthetic oils(A) Yes.(Q) Will too much hurt the motor(A) No, but do not exceed 8 ozs. (2 bottles).(Q) Can I use it in any motor(A) No, only 1989 and older.(Q) Will it work in diesel(A) No, it will have no effect on a diesel motor. Always wear eye and skin protection when changing oils or working around petroleum products. EASEW50332-10Z EW 50332-10 Z EW5033210 ZDDPLUS LIFTERS CAM PITTED SUPPLEMENT oil additive zinc lube lubrication
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
If you project vehicle is pre-1989, ZDDP Plus Oil Additive
... Read more
If you project vehicle is pre-1989, ZDDP Plus Oil Additive is a must for keeping that engine running smoothlyIf your engine was designed before 1989, the camshaft's non-roller lifters require ZDDP in the motor oil to prevent premature deterioration. However, the U.S. government ruled that ZDDP could no longer be put into domestic motor oils starting in 1989, so today's motor oils won't provide the ZDDP your older engine needs...unless you add this ZDDP Plus Oil AdditiveZDDP alters bearing and journal surface characteristics to prevent metal-on-metal contactZDDP reduces the tendency of parts to scuff or gall under heavy loadsAdd a 4-oz. bottle of ZDDP Plus to every 4- or 5-quart oil changeYou get 10 bottlesPre-'89 engine ZDDP prevents premature non-roller lifter deterioration use at every oil change. Add entire contents of bottle to a 4 to 6 quart oil change. Compatible with synthetic and conventional motor oils. For use in non-pollution controlled gas and diesel engines. For use on 1989 and prior motors.After 70+ years, the EPA mandated that all domestic motor oil producers remove ZDDP (Zinc Dialkyl Dithio Phosphate) from all conventional and synthetic motor oil. If your engine was designed before 1989, the non-roller lifters still require ZDDP to avoid premature deterioration. Our ZDDP Plus Oil Additive puts back what your pre-1989 engine needs Ten 4-oz. bottles of ZDDP Plus Oil Additive 12385ZP Fast Motor Flush12196Z Chassis Kleen Click Here for Material Safety Data Sheet Follow specific safety warnings on the MSDS Sheet. Always wear eye and skin protection when changing oils or working around petroleum products. 12269-10 Z 50332z 50332 zinc oil treatment oil change synthetic zddpplus zddp plus zplus change LOF
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Achieve lasting results with Black Rust Encapsulator and Ch
... Read more
Achieve lasting results with Black Rust Encapsulator and Chassis Black. Rust Encapsulator is a great rust preventative as well as an excellent primer. Gloss Chassis Black will allow you to correctly paint all of the suspension parts and frame on your project. Proper for all makes and models. It is specially formulated from a tough epoxy base to resist chips, salt and mud corrosion and other forms of road abuse. It's high solids content provides up to 4 times the coverage of similar size aerosols. Works great over bare metal or Rust Encapsulator.Black Rust Encapsulator and ChassisBlack restore suspension parts, frame Use Rust Encapsulator over firmly adhering rust to seal the surface against contact with moisture and air. For better appearance and increased durability top coat Rust Encapsulator with Chassis Black.Achieve lasting results with Black Rust Encapsulator and Chassis Black. Rust Encapsulator is a great rust preventative as well as an excellent primer. Gloss Chassis Black will allow you to correctly paint all of the suspension parts and frame on your project. Proper for all makes and models. It is specially formulated from a tough epoxy base to resist chips, salt and mud corrosion and other forms of road abuse. It's high solids content provides up to 4 times the coverage of similar size aerosols. Works great over bare metal or Rust Encapsulator. Due to the new regulations pertaining to paint recycling we are unable to ship this product to Alberta Canada at this time. The Full Chassis Restoration Kit includes 1 qt. Rust Encapsulator (enough to cover 50 sq. ft.) and 4 aerosol cans of Gloss Chassis Black (each 15 oz can covers 8 sq. ft.) PRE Painting Prep (10041Z) removes residual grease, oil, wax, and silicones to promote paint adhesion. 10066 Z BLK 10066Z EASTWOOD 10066ZBLK AER SET SETS KIT KITS FORTIFIED CHASIS CHASKIT CHASSIS BLACK RUST ENCAPSULATOR EMCBLK FRAME SPRAY COATING HPBLACK HPRUST PAINT CHASSIE RU SC13 SPECIALTY COATINGS EPOXY BLACK FRAME COATING SPRAYPAINT SPRAYCAN CAN SUSPENSION CHASY BLACK CHASEY BLACK FRAME BLACK TSC4
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Scan Tool Can OBD21 Kit with Live Data Code Reader the easi
... Read more
Scan Tool Can OBD21 Kit with Live Data Code Reader the easiest, most accurate way to troubleshoot OBD2 and OBD1 vehiclesCode reader will show you specifically what's gone wrong on most import and domestic vehicles, using either the OBD1 or OBD2 (On-Board Diagnostics) system, depending on car's model year.Retrieves OEM Enhanced and Transmission diagnostic codes in all OBD2 (1996 and newer), and some of the most popular OBD1 (1981 to 1995), vehiclesAll-in-one backlit screen and LED display allow quick State Emissions readiness check and drive-cycle verificationCan be flash-updated with your Windows PC (required OBD-PC Link software is included)Memory / Battery backup for off-car review and analysisIncludes access to CanOBD2.com RepairSolutions, which gives trouble code definitions, a full diagnostic report, probable causes, most likely fix to DTCs, repair costs and moreShows what's wrong on mostimport or domestic vehicles Domestic and foreign vehicles from 1982 to2007When the vehicles on-board computer detects a failure in an emissions-related component or system, the computers internal diagnostic program assigns a diagnostic trouble code (DTC) that points to the system (and subsystem) where the fault was found. The diagnostic program saves the code in the computers memory. It records a Freeze Frame of conditions present when the fault was found, and lights the Malfunction Indicator Lamp (MIL). Some faults require detection for two trips in a row before the MIL is turned on.Captures both intermittent and hard codes and displays all on one screen. Very user friendly simply select the appropriate connector, plug into vehicles test connector and press scan. The unit will scan the vehicle for trouble codes and clearly decipher trouble codes and display on screen. OBD2 CoverageRetrieves OEM Enhanced and Transmission DTCsCommunicates with all OBD2 protocols C.A.N. (Controller Area Network), ISO 9141, J1850PWM, J1850VPW, KWP 2000 ISO 14230-4Provides SAE-enhanced OBD2 Live Data - views, records and plays back live PCM data streams (requires included PC software)Displays Freeze Frame DataIncludes Spanish and French Interface Definitions (selected by a menu command)Retrieves OBD2 DTCs Generic Codes (P0, P2, P3, and U0) / Manufacturer Specific Codes (P1, P3 and U1) OBD1 CoverageGeneral Motors 1982 to 1993 and some 1994 to 1995 modelsFord, Lincoln, Mercury 1983 to 1995 models with EEC-IV SystemsPerforms KOEO, KOER, Timing Check, Cylinder Balance Test, Output State Test, Wiggle TestToyota / Lexus 1991 to 1995Chrysler / Dodge / Plymouth 1984 to 1995Jeep 1993 to 1995 Click here for instructions Code Reader includes instruction manual, 3 AA batteries and interface cables 042173031405 10042173031402 11358 3140OBDIIILIVE actron code reader scan tool OBD OBD1 OBD2 codes
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Untitled Document ADD TO FAVORITE STORES Sign up for store
... Read more
Untitled Document ADD TO FAVORITE STORES Sign up for store newsletter HOME | ABRASIVE BLASTING | AIRBRUSH | BODY & FENDER | BRAKES & SUSPENSION | ENGINE & DRIVETRAIN | INTERIOR | BUFFING & METAL REFINISHING METAL SHOP | PAINTING | PAINTS & COATINGS | PINSTRIPING | POWDER COATING | RUST PREVENTION | TOOLS & EQUIPMENT | WELDING | AUTO-AIR PAINTS Eastwood High Temperature Internal Exhaust & Header Coating with Spray Nozzle Eastwood Part Number 13795 Z Eastwood's High-Temp Internal Exhaust Coating Prevents Corrosion on the inside of the exhaust components Extends life of exhaust system components Reduces under hood and under car temperatures Withstands extreme temperatures up to 1800°F Use on headers, exhaust manifolds and exhaust tubing Eastwood's High Temperature Internal Exhaust Coating is a truly unique product in that it is designed to reduce under hood temperatures and extend the life of exhaust system components. By coating the inside of exhaust system components, this focused formula traps the heat inside
Minimize
Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
In stock
|
|
FREE Shipping
Go To Store
|
|
Uneven door gaps are more than a visual annoyance They can
... Read more
Uneven door gaps are more than a visual annoyance They can lead to uneven hinge and latch wear as well as increase wind noise from misaligned door seals. Here's a door alignment tool that will align most car and light truck doors with either bolted or welded hinges. Just open the door, insert the tool's pin into the open door latch, adjust until the non-marring heel is flush with the door. move the door toward the jamb to engage the latch pin, then rise or lower the tool lever to adjust the door. Includes adapter pin for trucks and instructions. One year limited manufacturer's warranty.Door Alignment Tool for Cars and Trucks Uneven door gaps are more than a visual annoyance They can lead to uneven hinge and latch wear as well as increase wind noise from misaligned door seals. Here's a door alignment tool that will align most car and light truck doors with either bolted or welded hinges. Just open the door, insert the tool's pin into the open door latch, adjust until the non-marring heel is flush with the door. move the door toward the jamb to engage the latch pin, then rise or lower the tool lever to adjust the door. Includes adapter pin for trucks and instructions. One year limited manufacturer's warranty. 14088 638570823509 82350 CARS LIGHT ADJUSTER ALIGN GAPPING SAG SAGGY EAS14088 LINE UP SAGGING WORN HINGES STRAIGHTEN ADJUST GAP EDGE
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
|
Save time and money with Chassis Restoration Kits designed
... Read more
Save time and money with Chassis Restoration Kits designed to team up with our durable epoxy fortified Chassis Black with our effective Rust Encapsulator, these kits provide the chip resistance and durability needed on chassis and suspension parts The Partial Chassis Restoration Kit includes 2 aerosol cans of Original Chassis Black and 2 aerosol cans of Black Rust Encapsulator.Black Rust Encapsulator and ChassisBlack restore suspension parts, frame Save time and money with Chassis Restoration Kits designed to team up with our durable epoxy fortified Chassis Black with our effective Rust Encapsulator, these kits provide the chip resistance and durability needed on chassis and suspension parts The Partial Chassis Restoration Kit includes 2 aerosol cans of Original Chassis Black and 2 aerosol cans of Black Rust Encapsulator.Due to the new regulations pertaining to paint recycling we are unable to ship this product to Alberta Canada at this time. 10067Z 10548 10548 Z CHASIS CHASKIT CHASSEY CHASSIS BLACK RUST ENCAPSULATOR COATING EASTWOOD EAS10548Z EMCBK HPBLACK HPRUST NEWTOOL PAINT RU SC19 SPECIALTY COATINGS FRAME EPOXIE EPOXY SPRAYCAN SPRAYPAINT SPRAY CAN OEM SEMI-GLOSS TSC4 TTOP10
Minimize
|
This store is not yet rated
|
FREE Shipping
Go To Store
|
