> abit nf7

Auction is for a brand new 3-pin ABIT motherboard chipset f ... Read more

Auction is for a brand new 3-pin ABIT motherboard chipset fan Actual picture is displayed above Material: Copper Inserts via pegs, no screws required Measures approximately 52mm in diameter and 13mm in height Compatible with the following models: AN7, AN8, AN8-V, AN8-SLi AT7 KD7, KD7A, KD7-G, KD8-RAID KV7, KV8, KV8-MAX3 KN8, KN8-Ultra NF7, NF7-M, NF7-S, Minimize

U.S. Cooler CL510510NF.D 6' x 6' x 7' 6" Walk-In Cooler wi ... Read more

U.S. Cooler CL510510NF.D 6' x 6' x 7' 6" Walk-In Cooler without Floor 6' X 6' X 7' 6" Walk-in Cooler Without Floor(5' 10 1/2" X 5' 10 1/2" X 7' 6" Actual) US Cooler manufactures Premium Quality Walk-ins at Extremely Reasonable prices. Unit is NSF and ul listed and tested. Above price is for a unit with Remote Indoor Refrigeration. See below for refrigeration options. When installed indoors, this walk-in requires a minimum of 3,952 BTUs. When installed outdoors, this walk-in requires a minimum of 4,760 BTUs. Estimated Shipping Weight: 1188 lbs. Design Notes: PANELS - Wall and ceiling panels are constructed with tongue and groove 1 1/4 LB expanded polystyrene insulation sandwiched between two sheets of 26-gauge stucco embossed galvanized steel. Each panel comes equipped with cam action locking devices and double barrel vinyl gasket to allow easy assembly of walk-in in the field. FLOOR - Floor panels consist of extruded high-density polystyrene foam insulation sandwiched between G90 stucco embossed 26 gauge outside and 22-gauge stainless steel inside. Floor meets NSF listing and comes with cam-action locking devices for easy installation. DOOR - 34” x 76” flush-mount cooler door is manufactured with foamed in place polyurethane insulation encapsulated between sheets of embossed 26 gauge G90 stucco embossed galvanized steel. Door is right hand hinged and includes lever action handle, light, hinges, cam-locks, door closure, lighted switch and vapor-proof light fixture. Warranty: Refrigeration unit includes a 1-year parts and labor warranty. Walk-in panels include a 10-year repair or replace parts only warranty. All other parts carry a standard 1-year parts warranty. Coolers do not meet standards for use in CA or OR. Minimize

U.S. Cooler CL710510NF.D 6' x 8' x 7' 6" Walk-in Cooler wi ... Read more

U.S. Cooler CL710510NF.D 6' x 8' x 7' 6" Walk-in Cooler without Floor Walk-in Cooler Without Floor6' X 8' X 7' 6" Nominal US Cooler manufactures Premium Quality Walk-ins at Extremely Reasonable prices. Unit is NSF and UL listed and tested. This walk-in comes with a 1/2 HP remote indoor refrigeration system. System comes with a condensing unit, evaporator unit and miscellaneous parts, all that will need to be installed in the field. This refrigeration system must be installed by a licensed refrigeration technician. Refrigeration system is designed to hold product at 35 degrees Fahrenheit with product entering at 55 degrees Fahrenheit. When installed indoors, this walk-in requires a minimum of 4,522 BTUs. When installed outdoors, this walk-in requires a minimum of 5,453 BTUs. Design Notes: PANELS - Wall and ceiling panels are constructed with tongue and groove 1 1/4 LB expanded polystyrene insulation sandwiched between two sheets of 26-gauge stucco embossed galvanized steel. Each panel comes equipped with cam action locking devices and double barrel vinyl gasket to allow easy assembly of walk-in in the field. FLOOR - Floor panels consist of extruded high-density polystyrene foam insulation sandwiched between G90 stucco embossed 26 gauge outside and 22-gauge stainless steel inside. Floor meets NSF listing and comes with cam-action locking devices for easy installation. DOOR - 34” x 76” flush-mount cooler door is manufactured with foamed in place polyurethane insulation encapsulated between sheets of embossed 26 gauge G90 stucco embossed galvanized steel. Door is right hand hinged and includes lever action handle, light, hinges, cam-locks, door closure, lighted switch and vapor-proof light fixture. REFRIGERATION - Remote Inside Refrigeration System, med temp, 1 Phase, 1/2 HP, Hermetic, 115 Volt. Includes: Copeland Condensing Unit, Evaporator, Thermo Expansion Valve, Site Glass, Dryer, Solenoid Valve, Thermostat. Maximum Low 35 Degrees. Does Not Include Refrigerant - R22. Warranty: Refrigeration unit includes a 1-year parts and labor warranty. Walk-in panels include a 10-year repair or replace parts only warranty. All other parts carry a standard 1-year parts warranty. Coolers do not meet standards for use in CA or OR. Minimize

U.S. Cooler CL99710NF.D 8' x 10' x 7' 6" Walk-In Cooler wit ... Read more

U.S. Cooler CL99710NF.D 8' x 10' x 7' 6" Walk-In Cooler without Floor Walk-in Cooler Without Floor 8' X 10' X 7' 6" Nominal US Cooler manufactures Premium Quality Walk-ins at Extremely Reasonable prices. Unit is NSF and UL listed and tested. This walk-in comes with a 3/4 - 1 HP remote indoor refrigeration system (Call or email for specific HP). System comes with a condensing unit, evaporator unit and miscellaneous parts, all that will need to be installed in the field. This refrigeration system must be installed by a licensed refrigeration technician. Refrigeration system is designed to hold product at 35 degrees Fahrenheit with product entering at 55 degrees Fahrenheit. When installed indoors, this walk-in requires a minimum of 6,326 BTUs. Design Notes: PANELS - Wall and ceiling panels are constructed with tongue and groove 1 1/4 LB expanded polystyrene insulation sandwiched between two sheets of 26-gauge stucco embossed galvanized steel. Each panel comes equipped with cam action locking devices and double barrel vinyl gasket to allow easy assembly of walk-in in the field. FLOOR - Floor panels consist of extruded high-density polystyrene foam insulation sandwiched between G90 stucco embossed 26 gauge outside and 22-gauge stainless steel inside. Floor meets NSF listing and comes with cam-action locking devices for easy installation. DOOR - 34 x 76 flush-mount cooler door is manufactured with foamed in place polyurethane insulation encapsulated between sheets of embossed 26 gauge G90 stucco embossed galvanized steel. Door is right hand hinged and includes lever action handle, light, hinges, cam-locks, door closure, lighted switch and vapor-proof light fixture. REFRIGERATION - Remote Inside Refrigeration System, med temp, 1 Phase, 3/4 HP, Hermetic, 115 Volt. Includes: Copeland Condensing Unit, Evaporator, Thermo Expansion Valve, Site Glass, Dryer, Solenoid Valve, Thermostat. Maximum Low 35 Degrees. Does Not Include Refrigerant - R22. Warranty: Refrigeration unit includes a 1-year parts and labor warranty. Walk-in panels include a 10-year repair or replace parts only warranty. All other parts carry a standard 1-year parts warranty. Coolers do not meet standards for use in CA or OR. Minimize

Polysorbate 80, Nf, Cas Number 9005-65-6, Container Size 7 ... Read more

Polysorbate 80, Nf, Cas Number 9005-65-6, Container Size 7 Gal, Shelf Life Approximate 24 Months, Shipping Restrictions Chemical Not Regulated For Transport, Special Information This Product Is An Oleate Ester Of Sorbitol And Its Anhydrides Copolymerized With Approximately 20 Moles Of Ethylene Oxide For Each Mole Of Sorbitol And Sorbitol Anhydrides. Minimize

U.S. Cooler CL710710NF.D 8' x 8' x 7' 6" Walk-In Cooler wit ... Read more

U.S. Cooler CL710710NF.D 8' x 8' x 7' 6" Walk-In Cooler without Floor Walk-in Cooler Without Floor 8' X 8' X 7' 6" Nominal US Cooler manufactures Premium Quality Walk-ins at Extremely Reasonable prices. Unit is NSF and UL listed and tested. This walk-in comes with a 3/4 HP remote indoor refrigeration system. System comes with a condensing unit, evaporator unit and miscellaneous parts, all that will need to be installed in the field. This refrigeration system must be installed by a licensed refrigeration technician. Refrigeration system is designed to hold product at 35 degrees Fahrenheit with product entering at 55 degrees Fahrenheit. When installed indoors, this walk-in requires a minimum of 5,783 BTUs. Design Notes: PANELS - Wall and ceiling panels are constructed with tongue and groove 1 1/4 LB expanded polystyrene insulation sandwiched between two sheets of 26-gauge stucco embossed galvanized steel. Each panel comes equipped with cam action locking devices and double barrel vinyl gasket to allow easy assembly of walk-in in the field. FLOOR - Floor panels consist of extruded high-density polystyrene foam insulation sandwiched between G90 stucco embossed 26 gauge outside and 22-gauge stainless steel inside. Floor meets NSF listing and comes with cam-action locking devices for easy installation. DOOR - 34 x 76 flush-mount cooler door is manufactured with foamed in place polyurethane insulation encapsulated between sheets of embossed 26 gauge G90 stucco embossed galvanized steel. Door is right hand hinged and includes lever action handle, light, hinges, cam-locks, door closure, lighted switch and vapor-proof light fixture. REFRIGERATION - Remote Inside Refrigeration System, med temp, 1 Phase, 3/4 HP, Hermetic, 115 Volt. Includes: Copeland Condensing Unit, Evaporator, Thermo Expansion Valve, Site Glass, Dryer, Solenoid Valve, Thermostat. Maximum Low 35 Degrees. Does Not Include Refrigerant - R22. Warranty: Refrigeration unit includes a 1-year parts and labor warranty. Walk-in panels include a 10-year repair or replace parts only warranty. All other parts carry a standard 1-year parts warranty. Coolers do not meet standards for use in CA or OR. Minimize

Over 3 Million Upgrades Sold Thank you to our loyal custome ... Read more

Over 3 Million Upgrades Sold Thank you to our loyal customers on EBay, at computer trade shows, at our retail locations and on our secure web site for over 12 years continued success. Buy with Confidence and Save $$$18004memory is eBay's Premiere Memory Manufacturer Offering Memory Straight to You at Prices up to 40% Less than Most Retail Sites.Find out more about 18004memory.Why buy from 18004memory? Check our our outstanding credentials:Nearly 100% positive feedback. That's a lot of happy cus Minimize

the ABIT AN8 32X AT8 32X KV8 NF-95 SC-1P SV-1A UL8 WI-1P

Kohler Comfort Height Pressure Lite 1.0 Gpf Elongated Toile ... Read more

Kohler Comfort Height Pressure Lite 1.0 Gpf Elongated Toilet from the San Raphael Series This San Raphael Comfort Height 1.0 gpf toilet, provides the most efficient and powerful flush available in a one-piece toilet. Available in a variety of highly desired colors, this San Raphael is a perfect fit for hospitality or residential applications. 30" L x 19-1/2" W x 21-1/2" H Elongated bowl 12" rough-in Pressure Lite flushing technology Includes Polished Chrome trip lever and K-4650 Lustra Open Front seat for commercial applications. Less supply. Meets strict flushing performance guidelines established by the EPA (Environmental Protection Agency) WaterSense program WaterSense labeled toilets use at least 20% less water than standard 1.6-gallon toilets Minimize

3P SW 16A NF N-1 NO DECAL

Hand Tap Set, Bottoming, Plug, Taper, Hss, Size 7/8, Finish ... Read more

Hand Tap Set, Bottoming, Plug, Taper, Hss, Size 7/8, Finish Bright, Flutes 4, General Purpose, Pitch 14, Thread Type Unf, Thread Length 2-7/32 In., Thread Length 56.358 Mm, Overall Length 4-11/16 In., Overall Length 119.063 Mm, Pitch Diameter Limits H4, Shank Dia. 0.697, Standards Uscti 302, List Number 1004, For Alloy Steel, Carbon Steel, Free-machining Stainless And Aluminum Minimize

4GB (4X1GB) MEMORY Speed PC2100 266MHz Certified For the AB ... Read more

4GB (4X1GB) MEMORY Speed PC2100 266MHz Certified For the ABIT KR7A RAID Minimize

Over 3 Million Upgrades Sold Thank you to our loyal custome ... Read more

Over 3 Million Upgrades Sold Thank you to our loyal customers on EBay, at computer trade shows, at our retail locations and on our secure web site for over 12 years continued success. Buy with Confidence and Save $$$18004memory is eBay's Premiere Memory Manufacturer Offering Memory Straight to You at Prices up to 40% Less than Most Retail Sites.Find out more about 18004memory.Why buy from 18004memory? Check our our outstanding credentials:Nearly 100% positive feedback. That's a lot of happy cus Minimize

Contact Adhesive, 5 Gal., Neutral, Temp. Range (f) -40 To 2 ... Read more

Contact Adhesive, 5 Gal., Neutral, Temp. Range (f) -40 To 200, A Water-dispersed, High Solids, Activated Adhesive. Immediate Bonding Capabilities And Handling Strength Without Forced Drying Equipment., For Use With 3m(tm) Fastbond(tm) Spray Activator #1, Substrates Flexible Polyurethane And Latex Foams, Plastic Laminate, Wood, Plywood, Particle Board, Canvas, Fabrics, Polyester Fiber And Many Plastics Minimize

Alternatives NF-7 Rimless. Frames can be fit with prescript ... Read more

Alternatives NF-7 Rimless. Frames can be fit with prescription lenses. Available Frame Color: Black, Blue, Brown, Rose/Pink Minimize

Over 3 Million Upgrades Sold Thank you to our loyal custome ... Read more

Over 3 Million Upgrades Sold Thank you to our loyal customers on EBay, at computer trade shows, at our retail locations and on our secure web site for over 12 years continued success. Buy with Confidence and Save $$$18004memory is eBay's Premiere Memory Manufacturer Offering Memory Straight to You at Prices up to 40% Less than Most Retail Sites.Find out more about 18004memory.Why buy from 18004memory? Check our our outstanding credentials:Nearly 100% positive feedback. That's a lot of happy cus Minimize

4-40-1 NC&NF CARBON STEEL TAP&DIE SET"

Kodak Scanner Part: NF35A7 Rubber Foot - Refurbished

Kohler Comfort Height Pressure Lite 1.0 Gpf Elongated Toile ... Read more

Kohler Comfort Height Pressure Lite 1.0 Gpf Elongated Toilet from the San Raphael Series This San Raphael Comfort Height 1.0 gpf toilet, provides the most efficient and powerful flush available in a one-piece toilet. Available in a variety of highly desired colors, this San Raphael is a perfect fit for hospitality or residential applications. 30" L x 19-1/2" W x 21-1/2" H Elongated bowl 12" rough-in Pressure Lite flushing technology Includes Polished Chrome trip lever and K-4650 Lustra Open Front seat for commercial applications. Less supply. Meets strict flushing performance guidelines established by the EPA (Environmental Protection Agency) WaterSense program WaterSense labeled toilets use at least 20% less water than standard 1.6-gallon toilets Minimize

Frigidaire one of the leaders in home appliances offers sup ... Read more

Frigidaire one of the leaders in home appliances offers superior products and service to rival many other companies Through meaningful innovations they39ve humanized their technology to create appliance design that39s uncluttered controls that are in... Minimize

Palm-coated Glove, Lightweight, Size Small, Color Red/black ... Read more

Palm-coated Glove, Lightweight, Size Small, Color Red/black, Foamed Pvc Coating Material, Coating Finish Rough Textured, Coating Coverage 3/4 Dipped, Nylon Lining, 15 Gauge, Knit Cuff, Resists Fats, Oils And Mild Acids, Light Assembly, Component Handling, Manufacturing, Small Part Handling, Maintenance, Ansi/isea Puncture Level 1, Pair Minimize

Finish: Biscuit Aquatic IN7NF7242 The Infinity Series offer ... Read more

Finish: Biscuit Aquatic IN7NF7242 The Infinity Series offers hydrotherapy based on ancient shiatsu massage. Features Aquatic's exclusive shiatsu back jet system and a continous waterfall. An air bathtub system releases thousands of warm air bubbles throughout the bathtub for a "hot springs" experience. Twelve pulsating jets simulate shiatsu sequences. Adjust the speed of the jets to modify the intensity of therapy or pause the action to prolong the soothing effects of a particular jet combination. Features: -Oval whirlpool. -Infinity collection. -Available in: -Biscuit finish. -White finish. . -Lucite cast acrylic construction. -Two person tub . -Extra deep contoured bathtubing well with contoured seating. -16 Jets include 12 Shiatsu back jets, 2 full size pressure flo hydrotherapy jets and 2 recessed rotary massage jets. -1 HP Variable speed air blower with 20 minute timer. -Electronic control panel. -Automatic purge and dry cycle. -600W Air heating system. -2 HP Run dry pump. -1.5 Kw Inline Maintenance Heater. -Quiet pad anti-vibration pump mount for quiet operation. -Shiatsu electronic control panel with preprogrammed jet sequencer. -bathtub side electronic control panel with temperature display. -Integrally molded fast-fill waterfall spout. -Chromatherapy. -Slip resistant floor. -Adjusta-level base. -Heat bent rigid PVC piping for optimum sanitary conditions. -Durable and easy to clean. Specifications: -Made in USA. -Capacity: 134 Gallons/507 Liters. -UL/CUL listed. -IAPMO listed. -Limited lifetime warranty. -Maximum water depth: 17.75". -Overall dimensions: 27.25" H x 71.125" W x 40.25" D. For more information on this product please view the Sheet(s) below: Specification Sheet Owners Manual Warranty Sheet Minimize

Visit Our eBay Store!1GB MEMORY FOR ABIT KD7 E While the pr ... Read more

Visit Our eBay Store!1GB MEMORY FOR ABIT KD7 E While the product you will receive will have identical specifications as those listed in this auction, the actual product may differ from the memory pictured here.This auction is for a single 1GB memory ram module. Like all Sterling Memory, this upgrade has a lifetime warranty.Lifetime Warranty Free shipping to the Continental USA New in Retail packaging Lifetime Warranty Compatibility Assured Money Back Guarantee Memory 100% Tested Specifications Minimize

System Board - Nf3000 (models 80u 81u 90u 91u) Nf1000 (mode ... Read more

System Board - Nf3000 (models 80u 81u 90u 91u) Nf1000 (models 51y 52y 61y 62y) - 100mhz Minimize