> Promise 2 CHANNEL ULTRA ATA 100 RAID Controller Cards I O

SnapSAN ACC RAID Controller Module 4Gb Fibre channel, 2 Por ... Read more

SnapSAN ACC RAID Controller Module 4Gb Fibre channel, 2 Port for SnapSAN S1000 by Overland Storage OV-ACC901041 this is one of 4 controller options available for the SnapSAN S1000 Modular storage Array. In stock now at BackupWorks.com Minimize

Mfr Part Number: 9650SE-8LPML SGL Features: 8th-generation ... Read more

Mfr Part Number: 9650SE-8LPML SGL Features: 8th-generation StorSwitch non-blocking switched architecture On-board I/O RISC processor and RAID offload provides true hardware RAID: SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives Bootable array support for greater fault tolerance Variable stripe size for performance tuning by application 64-bit LBA support ATA pass-through mode support 256MB DDR2-533 memory with ECC protection 32 pooled DMA channels Complete configuration management suite: 3ware BIOS Manager 2 (3BM2) - easy to use BIOS configuration tool 3ware Disk Manager 2 (3DM2) - browser-based management tool Command Line Interface (CLI) - scriptable configuration tool SNMP support SMTP support for email/pager notification ATA/6 and Out of band (OOB) staggered drive spin-up support Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN Battery Backup Unit (BBU) support Multiple logical unit sizes and RAID levels on one card Multiple card support within a system for large storage requirements Hot-swap and hot-spare support for data availability Dynamic sector repair for robust data protection S.M.A.R.T. disk drive monitoring for reliability Emergency Flash Recovery protects against failed firmware upgrade Drive activity LED support Online Capacity Expansion and RAID Level Migration Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal Drive insertion and removal notification Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane) Chassis Control Unit for enclosure management via I2C Port: 8x SATA; Serial ATA 2.6 Specification support Host Interface: PCI Express x4; PCI Express 1.1 compliant Raid Levels: 0; 1; 5; 6; 10; 50; Single Disk; JBOD Onboard Memory: 256MB DDR2-533 Connector Type: Multi-lane BBU Support: Yes BIOS PnP (plug and play) and BBS (BIOS boot specification) support Power Requirements: 18W maximum Form Factor: Low Profile Dimension (LxH): 7.3 x 2.73 inch / 18.54 x 6.93 cm Package: OEM Minimize

Mfr Part Number: 9650SE-4LPML SGL Features: 8th-generation ... Read more

Mfr Part Number: 9650SE-4LPML SGL Features: 8th-generation StorSwitch non-blocking switched architecture On-board I/O RISC processor and RAID offload provides true hardware RAID: SCSI device driver model to take advantage of the benefits of SCSI using inexpensive Serial ATA drives Bootable array support for greater fault tolerance Variable stripe size for performance tuning by application 64-bit LBA support ATA pass-through mode support 256MB DDR2-533 memory with ECC protection 32 pooled DMA channels Complete configuration management suite: 3ware BIOS Manager 2 (3BM2) - easy to use BIOS configuration tool 3ware Disk Manager 2 (3DM2) - browser-based management tool Command Line Interface (CLI) - scriptable configuration tool SNMP support SMTP support for email/pager notification ATA/6 and Out of band (OOB) staggered drive spin-up support Auto carving allows LUNs > 2TB to be divided into multiple units for legacy operating systems limited to 2TB max. per LUN Battery Backup Unit (BBU) support Multiple logical unit sizes and RAID levels on one card Multiple card support within a system for large storage requirements Hot-swap and hot-spare support for data availability Dynamic sector repair for robust data protection S.M.A.R.T. disk drive monitoring for reliability Emergency Flash Recovery protects against failed firmware upgrade Drive activity LED support Online Capacity Expansion and RAID Level Migration Enhanced data protection with write journaling for non-redundant arrays and accidental drive removal Drive insertion and removal notification Array/Drive Status and drive identification LED support (requires 3ware Chassis Control Unit-enabled backplane) Chassis Control Unit for enclosure management via I2C Port: 4x SATA; Serial ATA 2.6 Specification support Host Interface: PCI Express x4; PCI Express 1.1 compliant Raid Levels: 0; 1; 5; 10; Single Disk; JBOD Onboard Memory: 256MB DDR2-533 Connector Type: Multi-lane BBU Support: Yes BIOS PnP (plug and play) and BBS (BIOS boot specification) support Power Requirements: 18W maximum Form Factor: Low Profile Dimension (LxH): 7.3 x 2.73 inch / 18.54 x 6.93 cm Package: OEM Minimize

305415-001 HP Smart Array 642 64MB cache 2-channel PCI-X Ul ... Read more

305415-001 HP Smart Array 642 64MB cache 2-channel PCI-X Ultra320 SCSI raid controller card. Technician tested pulls with 1 year warranty.The Smart Array 642 Controller (SA-642) is a 64-bit, 133 MHz PCI-X dual SCSI channel PCI array controller for entry level hardware-based fault tolerance. Utilizing both SCSI channels (1 internal and 1 external) of the SA-642 allows you to configure up to 20 hard drives (6 internal, 14 external) to store up to 2.9TB of storage per PCI slot. The SA-642 provides high reliability and increased performance over the Smart Array 532, thus providing excellent value and lowering the total server ownership cost. In addition, the SA-642 is data compatible with all Ultra 320, Wide Ultra3 and Wide Ultra2 drives, offering an unparalleled degree of investment protection. Designed and integrated with HP entry-level and workgroup ProLiant servers, this product provides worry-free data protection. The Smart Array 642 Controller provides ProLiant DL and ML servers with an entry-level hardware RAID protection for OS and log files, where hardware RAID is needed at an entry-level price point. Minimize

The PERC6/i Integrated SAS RAID Controller Card from Dell™ ... Read more

The PERC6/i Integrated SAS RAID Controller Card from Dell™ provides integrated RAID capabilities. The Adapter comes with 256 MB of integrated DDR2 cache for quick storage. This PCIe® based card supports PowerEdge internal storage. It offers connectivity via 2 x 4 Internal Wide Port. The card offers support for RAID levels 0/1/5/6/10/50/60 storage strategies. The card also supports Hot-Swap functionality for ease of maintenance. Moreover, this card supports up to 32 maximum physical drives per array. This product has been tested and validated on Dell systems. It is supported by Dell Technical Support when used with a Dell system. Minimize