> POWER ACOUSTIC

Sold Individually... The ultimate home theater and digital ... Read more

Sold Individually... The ultimate home theater and digital music speaker for medium and large rooms. Boston BT Series set new performance standards for speakers designed for use in A/V cabinetry or the front theater stage. Coupled with appropriate amplification BT systems are capable of delivering massive output typically associated with commercial movie theater or concert hall performances. From explosive music and pounding effects to the most artistic texturing and softest whispers BT’s extraordinary power handling and sensitivity allow extreme audio levels while preserving the subtlest details. All without the enormous speaker size and mass normally required for true big theater sound. Sound so detailed and dynamic it’s utterly stunning. Clear and uncolored across the entire audio spectrum. This is the award-winning true-to-the original performance known as the Boston Sound. Every aspect of the BT1 has been thoroughly thought out. The height of the BT1 is a standard component size of 171/2" allowing easy installation into A/V cabinetry. Die-cast “finger pulls” positioned at the front of the speaker enclosure provide easy installation in tight cabinet spaces supplied neoprene pads prevent scratching and allow for smooth slide-in positioning of the speakers. All cable input terminals and switches are recessed at the rear of the speaker. The BT1’s midrange/tweeter baffle can rotate 360 degrees for horizontal or vertical placement in cabinetry—maintaining the proper sonic vertical alignment of the mid-range and tweeter. The baffle may also be angled for more accurate imaging when the speaker is far off-axis. Made from ridged die-cast aluminum the baffle’s thermal mass provides tremendous heat dissipation for the midrange and tweeter improving power handling and reliability. The BT1 uses Boston’s 1-inch VR® high-output aluminum-dome tweeter and 4½-inch neodymium midrange with 1½”-inch voice coil. An 8-inch woofer using a 1 ½-inch voice coil neodymium magnet and cast aluminum basket provides powerful bass. This driver compliment delivers an astounding 220 watts power handling with 93dB sensitivity. The BT1 will live behind a perforated video screen or cabinet grille cloth in most installations. It features a Screen Compensation Switch to accommodate installation in this environment. A Flush Mount Switch can compensate for response anomalies caused by placement issues found in some theater stages and A/V cabinets. It also comes with full-coverage metal grilles for bookshelf or speaker stand placement. High-output L/C/R and surround speaker can handle up to 220 watts 8" cast Neo magnet woofer with 1-1/2" voice coil 4-1/2" Neo magnet midrange with 1-1/2" voice coil 1" VRH.O.™ aluminum dome tweeter with AMD™ M/T baffle rotates to maintain sonic alignment of drivers for better imaging Cast M/T baffle acts as a heatsink for higher power handling Die-cast "finger pulls" allow easy installation in tight spaces Recommended Amplifier Power 20-220 watts Nominal Impedance 6 ohms Frequency Response (±3dB) 65Hz-22kHz Bass Unit 8" (200mm) cast Neo magnet 1-1/2" voice coil Crossover Frequency 500 and 3200kHz Dimensions (HxWxD) 17-1/2 x 10 x 9-7/16" (445 x 254 x 240mm) w/grille Finish Black Sensitivity (1 watt (2.83v) at 1m) 93dB Midrange 4-1/2" (115mm) cast Neo magnet 1-1/2" voice coil Tweeter 1" VRH.O.&trade aluminum dome tweeter with AMD&trade Minimize

Acoustic Magic Voice Tracker Array Microphone The Ac ... Read more

Acoustic Magic Voice Tracker Array Microphone The Acoustic Magic Voice Tracker Array Microphone provides users with a unique microphone that automatically locates and electronically steers towards the talker. Unlike traditional "fixed" microphones, users do not have to stay in one position while speaking; users are free to lean backwards, sideways or even move around without the fear of their voice being lost by the receiver. Not only ideal for individual use, the Acoustic Magic Voice is great for teleconferencing as the microphone rapidly steers to the individual participants. This easy to use microphone utilizes Location Dependent Squelch (LDSTM) to de-sensitize the microphone to sounds coming from pre-selected directions. A digital signal processor creates a listening beam that only focuses on the actual talker and spatially filters all other noises. The proprietary noise reduction algorithms filter out the background noise and reverberations to provide the listener on the other end with a clear and crisp sound, free of unwanted noise. If you need an array microphone with built-in ACE for a VoIP conferenceing system our Acoustic Magic Voice Tracker II Array Microphone is just what you need. Durable and reliable, this array microphone does not have any moving parts and requires no installation software; simply plug it into your computer's sound card and a wall outlet and begin teleconferencing or speaking with loved ones comfortably. Purchase the Acoustic Magic Voice Tracker Array Microphone today from ActiveForever! Acoustic Magic Voice Tracker Features: Automatically locates and electronically steers towards the talker Two stage noise reduction algorithms Selectable steering limits for speech recognition and teleconferencing modes Microphone tilt capability Ideal for use in various medical, legal and educational facets Hands free digital recording through PCs or handheld recorders No software required for installation LDSTM, Patent Pending Acoustic Magic Voice Tracker Array Microphone Specifications: Dimensions: 18"L x 2.5"H Weight: 2.5lbs Frequency response: 100Hz to 11,250Hz Power equipment: 6V DC, 400 ma, Center Pin Positive Analog output: 500 ohm output impedance, 3.5mm mini stereo jack Steering limits: 90° and 180° Compatible with Apple/Macintosh: OS, OS X Compatible with Microsoft Windows: 3.x, 95, 98, NT, 2000, ME, XP, Vista Included: Acoustic Magic Voice Microphone, 6ft male/male audio cable, wall-powered converter Warranty: 1 year limited warranty Returns: All returns subject to ActiveForever's return policy and a 20% reprocessing fee . Please call Customer Service for a RMA (Return Merchandise Authorization) Number. Unauthorized returns will not be accepted. Related Searches: voip, mics - A microphone array (array microphone) is any number of microphones operating in tandem. There are many different applications for use. The Acoustic Magic Voice Tracker Array Microphone is unique in that it has eight microphone elements that scan 360 ° continuously. This allows location tracking ranges of 20 feet or more. The microphone elements electronically steer a "listening beam," like an acoustic searchlight, in the direction of the person speaking. Benefits of using an Array Microphone are endless. This is the Acoustic Magic Voice Tracker Array Microphone only Minimize

Boston BT Series set new performance standards for speakers ... Read more

Boston BT Series set new performance standards for speakers designed for use in A/V cabinetry or the front theater stage. Coupled with appropriate amplification BT systems are capable of delivering massive output typically associated with commercial movie theater or concert hall performances. From explosive music and pounding effects to the most artistic texturing and softest whispers BT’s extraordinary power handling and sensitivity allow extreme audio levels while preserving the subtlest details. All without the enormous speaker size and mass normally required for true big theater sound. Sound so detailed and dynamic it’s utterly stunning. Clear and uncolored across the entire audio spectrum. This is the award-winning true-to-the original performance known as the Boston SoundTM. The BT1100 subwoofer was designed to compliment the BT2 and BT1 high output LCR speakers. Every aspect has been thoroughly thought out for this application. The width of the BT1100 is a standard component size of 171/2" allowing easy installation into A/V cabinetry. Die-cast “finger holds” positioned at the front of the speaker enclosure provide easy installation in tight cabinet spaces supplied neoprene pads prevent scratching and allow for smooth slide-in positioning of the speakers. All cable input terminals and controls are recessed at the rear of the speaker. The BT1100 subwoofer features a 12-inch DCD® cast-aluminum frame woofer with 2-inch voice coil. It’s driven by a powerful 300-watt amplifier and controlled by our proprietary BassTrac® circuitry. Speaker level line level and LFE inputs provide connectivity to any audio system. A front-mounted volume control is coupled with adjustments for phase and crossover point on the rear panel. The BT1100 is designed for theater stages or A/V cabitnet installation. Bass is vented through a 3½-inch tall slot located at the lower front of the cabinet. In cabinet installations the BT1100 can sit directly on the floor isolating the sub from the cabinet eliminating unwanted vibration. Bass vents into the room via the cabinet toe-kick. This eliminates the necessity speaker grills at the bottom of the cabinet. Want Big Theater Sound? Use Boston a BT1100 with BT1 and BT2 speakers. 300-watt amplifier 12" cast DCD™ woofer with 2" voice coil BassTrac® circuitry eliminates distortion Slot-firing design for in-cabinet installations Front-mounted volume control Die-cast "finger pulls" allow easy installation in tight spaces Frequency Response (+- 3dB) 27Hz-150Hz Bass Unit 12" (305mm) cast DCD? with 2" voice coil Dimensions (HxWxD) 18-1/4 x 17-1/2 x 19" (464 x 445 x 483mm) Finish black Subwoofer Crossover 50-150Hz 24dB/octave low pass Amplifier Power FTC Rated Power: 300 watts @ 50Hz into 4 ohms at less than 1% THD+N Minimize

Powered subwoofer frequency response 28-100 Hz,10" woofer d ... Read more

Powered subwoofer frequency response 28-100 Hz,10" woofer driven by 300-watt RMS amplifier,signal-monitoring circuitry eliminates distortion Minimize

Brand New Acoustic Research Powered DVI Repeater AR489 Reta ... Read more

Brand New Acoustic Research Powered DVI Repeater AR489 Retail Price: $199.95 Never used,still in retail box Not refurbished Product Features And Benefits: Use with all HDTV formats including 720p, 1080i, 1080p. Universal circuit design can be used with any HDTV or HD display High-purity silver solder and 24K gold plating. Lowers resistance for more accurate signal transfer Active device uses 5V provided by the DVI output source. No additional power supply to connect that can add noise Shielded Minimize

AKG Acoustics SR450 Receiver - HT450 Handheld Transmitter w ... Read more

AKG Acoustics SR450 Receiver - HT450 Handheld Transmitter with D 5 Microphone Element - 2 x UHF Receiver Antennas - Receiver Power Supply - RMU 100 Rackmount Kit - AA Alkaline Battery - SA100 Microphone Stand Adapter - PB 1000 Presence Boost Adapter - Carrying Case - Manual Supplement - AKG Acoustics 2 Year Parts & Labor Warranty.The AKG WMS 450 Vocal Set is a flexible handheld wireless microphone system that offers the reliability of multi-band UHF operation, professional features and a cost effective price for use in any application. The system is delivered with the SR 450 receiver and HT450C handheld microphone transmitter with condenser element. The HT 450 is a high-performance, rugged handheld transmitter for a host of applications. Many innovative features enhance both system reliability and user friendliness. An LC display indicates all important system data at a glance, including the selected frequency in MHz or as a Preset subchannel, available battery capacity in hours, a warning when battery capacity is low, as well as the current transmission mode. Once you have set a frequency on the receiver, an infrared transmission link will feed the related data to the assigned transmitter within seconds, making the setting up of large multichannel systems child's play. The SR 450 diversity receiver is your best choice for cost-efficient, high-performance multichannel systems. Up to 12 channels can be used simultaneously within the same subband and even large systems will work smoothly in environments hostile to RF transmission. Being compatible with professional WMS 4000 antenna splitters, power supplies and high quality antennas, the WMS 450 enables you to set up highly complex wireless systems. In Auto Setup mode, the receiver will scan the available bands, find an interference-free channel and transmit the related frequency data to the assigned transmitter via infrared. This technique significantly reduces the time it takes to set up a multichannel system. A Rehearsal function identifying dead spots, a programmable display clearly indicating all important system parameters, two-color display backlighting warning the user of critical conditions from a distance and a transmitter battery status display on the receiver enhance reliability and add to ease of use. Minimize

Pure Acoustics Noble-Iis 2-Way Noble Ii Series 4" Speakers ... Read more

Pure Acoustics Noble-Iis 2-Way Noble Ii Series 4" Speakers Description Pure Acoustics Noble-Iis 2-Way Noble Ii Series 4" Speakers 225W Peak, 150W Rms Power Handling 4" Poly-Injected Woofer Engineered To Provide High Bass Output Even With Its Small Size 1" Oil-Cooled Silk Dome Tweeter Delivers Pin-Drop Clarity Freq Resp: 60 Hz-20 Khz Sensitivity: 87 Db Gold-Plate Binding Posts Elegant Piano Black-Gloss Cabinet Includes Wall Mounts Dim: 9.85"H X 5.7"W X 5.5"D Pair Featured Categories TV Video App Minimize

Subwoofer Features: Dual 12in 2 Ohm GTuned Series Ported L ... Read more

Subwoofer Features: Dual 12in 2 Ohm GTuned Series Ported Loaded Car Subwoofer Enclosure Power Handling: Peak: 800 watts RMS: 400 watts Impedance: 2 Ohms (wired internally for final impedance) Co-polymer woofer cone Foam rubber woofer cone PowerVent™ tuning for optimum efficiency, impact and extension High quality MDF enclosure with glued and dado ends Heavy-duty nickel plated input terminals accept up to 10 AWG wire SureSet™ overdrive protection High temperature 2in 4-layer voice coil Radialvent® cooling, for increased power handling Black and Gray two-tone automotive grade carpet Q-Tune Setting: 32 Hz @ 1.0 Frequency Response: 34 Hz Fuse Size: 7.5 Amp ATC 1-year Manufacturer's warrantyEnclosure Features: Dual 12in Loaded, Ported Enclosure Over-sized port Heavy duty nickle plated spring-loaded binding posts Black and Gray two-tone automotive grade carpet Dimensions: 14-1/4inTD x 18-1/8inBD x 34-1/8inW x 15-1/8inH Minimize

This earth-shaking bass amp head and cab stack includes the ... Read more

This earth-shaking bass amp head and cab stack includes the Acoustic B200H Bass Amp Head and the Acoustic B410 400W 4x10 Bass Speaker Cabinet. The B200H professional bass head is designed for large club and live applications where fills any stage with depth and definition. The B410 speaker cabinet easily handles the power of the Acoustic B200H amp head and provides wall-shaking lows and massive bottom end. Acoustic B200H 200W Bass Head:The 2 bass inputs are designed to accommodate both active and passive bass guitars while the Gain and Volume controls give you complete control over the character of your tone. Increase the gain for some old school rock tones, or lower it and turn up the volume for great clean, classic or funk tones. The preamp includes a very natural and tube-like compression as well as a harmonically rich distortion circuit, which keeps your tone musicaleven at high volume levels. The Acoustic B200H head also includes a notch filter to tailor your mids, and a 6-band EQ for exact control over every nuance of your bass's tone.Rear-panel features include a parallel Effects Loop, and XLR balanced Line Out with Level Control and Ground Lift. The 2 speaker output jacks allow you to directly connect to each enclosure (such as the Acoustic B115 and or Acoustic B410) to maximize your tone and power.Acoustic B410 400W 4x10 Bass Speaker Cabinet:The Acoustic B410 Bass Cabinet has a professional enclosure designed for large clubs and live applications where it fills any stage with depth and definition. Although conservatively rated at 400W RMS, any combination of Acoustic B115 or B410 cabinets may be used for larger venues.The Acoustic B410 Bass Speaker Cabinet has a rock-solid, sealed design with heavy internal bracing, caster sockets and professional spring-loaded touring handles with rubber grips. Heavy-duty rubber feet allow secure stacking and ensure solid placement on any floor surface. Rear panel features include a recessed jackplate with parallel dual 1/ Minimize

Subwoofer Features: 10in Single 4 Ohm GTuned Series Ported ... Read more

Subwoofer Features: 10in Single 4 Ohm GTuned Series Ported Loaded Car Subwoofer Enclosure Power Handling: Peak: 400 watts RMS: 200 watts Impedance: 4 Ohms (wired internally for final impedance) Co-polymer woofer cone Foam rubber woofer surround PowerVent™ tuning for optimum efficiency, impact and extension High quality MDF enclosure with glued and dado ends Heavy-duty nickel plated input terminals accept up to 10 AWG wire SureSet™ overdrive protection High temperature 2in 4-layer voice coil Radialvent® cooling, for increased power handling Black and Gray two-tone automotive grade carpet Q-Tune Setting: 35 Hz @ 0.9 Frequency Response: 36 Hz Fuse Size: 4 Amp ATC 1-year Manufacturer's warrantyEnclosure Features: Single 10in Loaded, Ported Enclosure Over-sized port Heavy duty nickle plated spring-loaded binding posts Black and Gray two-tone automotive grade carpet Dimensions: 11-7/8inTD x 14-5/8inBD x 19-3/4inW x 12-7/8inH Minimize

15in Single 4 Ohm G2 Series Subwoofer Power Handling: ... Read more

15in Single 4 Ohm G2 Series Subwoofer Power Handling: RMS: 300 watts Impedance: Dual 4 Ohm Co-polymer woofer cone Foam woofer surround SureSet™ impedance selection provides simple impedance selection as well as overdrive protection Rigid cast aluminum chassis RadialVent® cooling directs airflow around the voice coil for increased power handling 2-1/4in 4-Layer Voice Coils 2in peak to peak excursion for devastatingly accurate, deep bass output from small sealed enclosures Rugged input terminals accept bare 8 gauge wire or pin connectors Integral sealing gaskets ensure tight seals for any mounting configuration SPL Sensitivity: 93.9dB Xmax: 13.3mm Frequency response: 18-350 Hz Mounting Depth: 7-1/16in Cutout Dimensions: 13-15/16in 1-year Manufacturer's warranty Minimize

Acoustic Magic Voice Tracker II Array Microphone The A ... Read more

Acoustic Magic Voice Tracker II Array Microphone The Acoustic Magic Voice Tracker II Array Microphone is a deluxe USB speech recognition and conferencing tool designed for use in lecture halls, office meetings, VoIP conferences and more. Redesigned with help and input from customer feedback on the original Voice Tracker Array Microphone , the Voice Tracker II (VT II) provides unbeatable sound fidelity and ease of use. The VT II incorporates a high-quality acoustic echo cancellation (AEC) algorithm which enables full duplex VoIP based conferencing, which means that all parties can speak and listen at the same time without any loss in sound quality. This feature eliminates the need for headphones, as the microphone differentiates between talkers and will not pick up and re-transmit sounds on the receiving end of the call. With USB primary audio output and power connection, the Acoustic Magic Voice Tracker II Array Microphone is streamlined for VoIP use, however the unique electronic 'listening beam' technology allows the VT II to be used for a variety of other industrial applications, including the legal, medical and educational fields. The innovative multi-element microphone design provides superb clarity and mic accuracy for the entire room, allowing multiple users to speak without the need to reposition themselves or the microphone. This feature also lets the VT II learn the location of the talker, which can be used to direct a camera or other device towards the sound origin. The high-quality electronic mic array also works great with automatic speech recognition software, providing accurate and concise transcription and playback. Truly a unique and affordable alternative to a majority of conferencing tools on the market, buy your Acoustic Magic Voice Tracker II Array Microphone from ActiveForever.com today! Acoustic Magic Voice Tracker II Array Microphone Features: Specially designed VoIP compatibility built in Electronically locates and automatically steers toward talker Rapidly converging AEC algorithm Headset quality recording without the headset Two stage spatial filtering for noise reduction Built-in high quality acoustic echo cancellation Multi-element microphone design maximizes pick up range Compatible with a wide variety of computer operating systems Works well with a variety of automatic speech recognition programs Acoustic Magic Voice Tracker II Array Microphone Specifications: Dimensions: 11.5" L x 1.5" W x 1.25" H Weight: 0.75lbs Range: 20 ft Frequency Response: 100Hz to 11,250 Hz Primary Audio Output: USB Analog Output: Mic or line level Scanning Range: 360° Microphone Elements: 6 Power: USB, 5V DC adapter Compatibility: Mac OS, Mac OS X, Windows 3.x, Windows 95, Windows 98, Windows NT, Windows 2000, Windows ME, Windows XP, Windows Vista, Windows 7 Warranty: 1 year limited warranty Returns: All returns subject to ActiveForever's return policy and a 20% reprocessing fee. Please call Customer Service for a RMA (Return Merchandise Authorization) Number. Unauthorized returns will not be accepted. Related Searches: 201, speech reconition, voicetracker, array mic, VT II, - Acoustic Magic Voice Tracker II Array Microphone Minimize

The Acoustic B410 bass cabinet has a professional enclosure ... Read more

The Acoustic B410 bass cabinet has a professional enclosure designed for large clubs and live applications where it will fill any stage with depth and definition. Used in conjunction with the Acoustic B200H head, the B410 cabinet will easily handle the power of the amplifier and provide wall-shaking lows and massive bottom end. Although conservatively rated at 400 watts RMS, any combination of B115 or B410 cabinets may be used for larger venues.The B410 bass cabinet features a rock-solid, sealed design with heavy internal bracing, caster sockets and professional spring-loaded touring handles with rubber grips. Heavy-duty rubber feet allow secure stacking and ensure solid placement on any floor surface. Rear panel features include a recessed jackplate with parallel dual 1/4" jacks and a horn on/off switch.Classic Acoustic cosmetics include nickel corners, black grille cloth with white piping, heavy-duty road-worthy covering material and steel trim strips with understated blue accent color. It all adds to the durability (and legacy vibe) of this great cabinet.The heritage of Acoustic comes through loud and clear in the B410a seriously professional stage enclosure for serious bassists.Power: 400 watts power handlingSpeaker: 4 x 10" heavy-duty speakers, high-frequency with on/off switchImpedance: 8 ohmsInput: Parallel 1/4" input jacksOther goodies: heavy-duty tour handles, damage resistant vinyl covering, caster sockets (casters sold separately) Minimize

10in Dual 4 Ohm G3 Series Subwoofer Power Handling: ... Read more

10in Dual 4 Ohm G3 Series Subwoofer Power Handling: RMS: 375 watts Impedance: Dual 4 Ohm Co-polymer woofer cone Foam woofer surround SPS™ (Soft Part System) technology allows for cone assembly removal SureSet™ impedance selection provides simple impedance selection as well as overdrive protection Rigid cast aluminum customizable chassis RadialVent® cooling directs airflow around the voice coil for increased power handling 2-1/2in 4-Layer Voice Coils 2-3/4in peak to peak excursion for devastatingly accurate, deep bass output from small sealed enclosures Rugged input terminals accept bare 8 gauge wire or pin connectors Integral sealing gaskets ensure tight seals for any mounting configuration Compatible with the GTR10 tunable radiator for added bass SPL Sensitivity: 90.8dB Xmax: 14.5mm Frequency response: 24-350 Hz Mounting Depth: 6-3/8in Cutout Dimensions: 9-1/4in 1-year Manufacturer's warranty Minimize

12in Single 4 Ohm G3 Series Subwoofer Power Handling: ... Read more

12in Single 4 Ohm G3 Series Subwoofer Power Handling: RMS: 375 watts Impedance: Single 4 Ohm Co-polymer woofer cone Foam woofer surround SPS™ (Soft Part System) technology allows for cone assembly removal SureSet™ impedance selection provides simple impedance selection as well as overdrive protection Rigid cast aluminum customizable chassis RadialVent® cooling directs airflow around the voice coil for increased power handling 2-1/2in 4-Layer Voice Coils 2-3/4in peak to peak excursion for devastatingly accurate, deep bass output from small sealed enclosures Rugged input terminals accept bare 8 gauge wire or pin connectors Integral sealing gaskets ensure tight seals for any mounting configuration Compatible with the GTR12 tunable radiator for added bass SPL Sensitivity: 88.8dB Xmax: 14.5mm Frequency response: 20-350 Hz Mounting Depth: 6-9/16in Cutout Dimensions: 11-3/16in 1-year Manufacturer's warranty Minimize